Search results

  1. a885.0

    Few Vids Of My Coupe

    Took the car to the track last friday for a few passes.. basic run down of the set up is... pump gas 410ci., c4 w/ucc coverter, full interior no cage, full exhaust w/tail pipes.. tried it on the radials for the first time ever left off idle went 10.64@127 with a junk 1.57 60' tried it a few more...
  2. a885.0

    made some changes..new pics.

    before: [/URL][/IMG] [/URL][/IMG] after: [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] [/URL][/IMG] decided to go with a little more of a "blacked out" look... let me know what you think.. Adam
  3. a885.0

    vid/pics of my 410w

    finally got my new engine up and running last week, and got a chance to take a short idle vid, and some pics. engine combo is: RNH built410w 10.3:1 comp. ratio AFR 225cc heads custom solid roller cam (248 [email protected] .672 .672 lift) EFI edelbrock super vic intake...
  4. a885.0

    My RNH 410w..

    Hey guys just wanted to say thanks to Rick, I just picked up my engine from him yesterday. specs are 74' block .040 bore, scat 4'' 4340 crank,scat 6.2'' h-beam rods,probe 22cc dish pistons, 10.3:1 comp. ratio, AFR 225 heads, custom solid roller 248/[email protected] .672.672 lift, edelbrock super vic...
  5. a885.0

    Went to the dyno today....

    We took my buddies 84 notch to the dyno, pretty impressed with the results.. combo is stock 88 short block afr 165cc heads f-cam torker II intake BG 650 might demon carb...
  6. a885.0

    My family's mustangs (pics)

    [/URL][/IMG][/URL][/IMG][/URL][/IMG][/URL][/IMG]
  7. a885.0

    FRPP 347 track results

    We took my brothers 84gt with the ford racing z-headed 347 crate motor to the track this past friday 5-25-07. The car has a full drag suspension set up, barry grant 750 mighty demon, 1 3/4 headers, 3in prochamber, 3in pro-dumps,hoosier 28x9 slicks,stock rebuilt t-5, and a 150 shot...
  8. a885.0

    Some engine pics

    [/URL][/IMG][/URL][/IMG][/URL][/IMG][/URL][/IMG][/URL][/IMG][/URL][/IMG]
  9. a885.0

    installed coil overs have a ?

    I installed a set of granatelli drag coil overs along with lakewood 90/10 struts everything is fine except when i hit a bump in the road, the coil overs make a clicking noise. I was wondering if any of you have ran across this and have any solutions. I called granatelli and they told me there...
  10. a885.0

    caster/camber plates

    I just switched over to a front coil-over set up and was wondering which aftermarket caster/camber plates i should go with, i also read that i should go with a 4 bolt style instead of a 3 but i dont see many 4 bolt ones at all. Thanks
  11. a885.0

    canfield head question

    i have a chance to get some canfield heads they are basically brand new for around $600-$700 i believe they have 2.02 intake valves and i was wondering if i would have any piston to valve clearence problems with the stock pistons on the web site it says they will work with stock pistons and a...
  12. a885.0

    guage install question

    When installing an after market temp guage do you have to have the after market and the stock guage hooked up?? i was told if you leave the stock guage unhooked that the car would not run correctly is this true?? Thanks Adam
  13. a885.0

    dyno results

    I got my car dynoed last thursday 4/29 it made 244.1 horse and 291.4 torque with the mods in the sig. I was very pleased with the results the car is still speed density and has bone stock heads let me know what you guys think Thanks Adam
  14. a885.0

    Getting dynoed thursday

    Iam getting my car dynoed in a couple days and i was just wondering what you guys think i will put down, mods are in my sig, and timing is set to around 14' , it is also a five speed Thanks Adam
  15. a885.0

    1984 GT help

    my brother recently bought a 1984 gt with a 5 speed, once in a while it will idle funny it sounds like it is not running on all cylinders and will idle really low like 200-300 rpm, and if you shut it off for a while and start it back up it will run fine so it kind of sounds like it is something...
  16. a885.0

    QUICK I NEED HELP

    is a 87-93 T5 the same as a 94-95 T5??? please help Thanks Adam
  17. a885.0

    carbed guys i need some advice

    my brother just got a 1984 gt and he wants a new carb and intake manifold they were thinking about a eldelbrock performer carb and manifold, would you recomend a 600 cfm with manual or electric coke? and also what would be involved with taking the cruise control out? Thanks Adam
  18. a885.0

    AOD to T5 swap

    I was planning on beefing up my AOD with a manual valve body,converter,and trans cooler which came out to around $1200 but I am affraid that I will not be satisfied with the perfromance so i am going to convert to a T5,I found a kit from Mustang Specialties,Inc. which is $1695 with everything...
  19. a885.0

    tranny question

    i have a 88 notch back with a AOD and i plan on buying a lentech street terminator valve body for it and i was wondering what stall converter i should use? i would like to only spend like 400-600 on the converter with a stall speed of about 2500-2800, and also would it be nessesary to rebuild...
Top Bottom
Back
Forums
Menu