Search results

  1. onefstsnake

    Turn Signals Not Working

    Well I havent driven the car much in 6 months. But for a while now the turn signals havent been working. Well they might work for a few minutes but after that they wont work at all. Ive replaced both the turn signal and hazard flasher units, and the hazards do work. So its either the...
  2. onefstsnake

    Bad Vibration at 70+ MPH

    Well Ive searched and have found alot of great info but nothing to solve my vibration problem. Car is a 93 Coupe. TKO 600 trans, FMS Aluminum DS, Auburn Pro Locker, 31 Spline axles, and FMS 4.10 gears. Vibration happens at 70mph and continues at higher speed but doesnt get worse. No...
  3. onefstsnake

    Soft Brakes Bad Booster?

    Well a little history on what ive done. I recently replaced the front calipers w/ new ones and new pads, all new hardware. I also replaced the MC. I completely flushed all the old fluid out and bled all 4 corners and bench bled the MC. Now when the car is off the pedal feels very firm...
  4. onefstsnake

    Gaugeplates.com...

    I bought their A/C Relocation panel about a week ago. Today I decided to install it. Out of the box it looks great. Fits decent. A/C Controls are pretty hard to move down to the bottom. Had to lengthen all of the vacuum lines. Had a wiring connector fall apart... So I got my...
  5. onefstsnake

    Remember this picture?

    Saw this posted on a different site and I remembered it was a guy from SN that did this rolf...
  6. onefstsnake

    Styling Bar With Roll Over Protection?

    My dad wants to buy a 99+ GT Vert but wants some sort of rollover protection. He doesnt like the look of a roll cage, so thats out... Does anyone make a 2 point roll bar that looks like the styling/light bars? Doesnt seem like it would be hard to make...
  7. onefstsnake

    Trans Off Center? Help...

    Well I just got my TKO 600 in today... damn that was a pain. Got the input shaft all the way in except for the last 1/4" so I just tightened up the bolts till it closed the gap. Anyways the shifter sits maybe 1/2"+ farther to the passenger side than the old T5 did. So much so that the...
  8. onefstsnake

    quick trans install question

    Im installing a TKO600 and im wondering if I should bolt the bellhousing up to the trans and install both at the same time or bolt the bellhousing up first then the trans... Seems to me that bolting the bellhousing up first would be easier.
  9. onefstsnake

    Yeah I would say its broken...

    http://s18.photobucket.com/albums/b130/onefstsnake2/trans/?action=view&current=Untitled-15.jpg&slideshow=true&interval=3 3rd doesnt look too good...
  10. onefstsnake

    Removing T5 without Bellhousing?

    Just wondering if I can simply unbolt the trans from the bell housing and drop the trans?
  11. onefstsnake

    Rear Disc w/ 15" Wheels + More

    Im really looking into converting the rear to disc brakes but Im wondering if they will fit a 15" wheel. It looks like the V6 and GT brakes use a 10.XX" solid rotor, any downside to the solid rotor? Also can I keep the stock Brake Booster with the 4 wheel disc and just change the MC? Thanks
  12. onefstsnake

    Got Some Cash, What To Do?

    Well I got a nice bonus at work + an awesome check. So I have around $600 to spend on the stang. Not sure what to spend it on though... I might go with suspension things, like Coil Overs for the front and tubular A arms. Power wise Im pretty happy with it. EDIT: Here is a list...
  13. onefstsnake

    Key Chime

    Well I had to pull the cluster out to replace a couple bulbs... :bang: And I think the key chime broke off. Its a small white plastic piece with one wire going to it and two metal strips that when touched together sound the key chime. I cant find out where its mounted to. Right now its...
  14. onefstsnake

    MMR Coil Over's?

    Anyone know if these are quality parts? I saw some on sale for under $200 shipped... Cheap parts always have me worried... :shrug:
  15. onefstsnake

    New Pics of the Coupe and New Wheels

    Well I got the 99 Cobras. Almost no curb rash except for one small 1/2" spot. I still need to raise the rear a little so it sits even. And get new tires for the rear... Pep Boys tires suck. :notnice: Oh and new pics under the hood since the battery relocation. Needs some...
  16. onefstsnake

    Throwing Both Lean Codes No Fix In Sight...

    Well Ive posted a thread on here a while back about the car running rough. Turns out I had a bad injector... I replaced all 8 with FMS 19's But the car still idles rough and surges from 900-2,000rpm (yes I checked the checklist...) I get codes for both banks being lean and the car reeks of...
  17. onefstsnake

    POLL: 99 Cobra's or 03 Bullitt's

    I have an opportunity to pick up a set of OEM 99 Cobra wheels w/ tires for a good price and also a set of OEM 03 GT Bullitt wheels w/ tires for a good price as well. But Im not sure which to go with... I see alot more Bullit wheels than 99 Cobra's... Im just looking for another set of...
  18. onefstsnake

    Battery Relocation Help. Splicing 0 Gauge?

    Im doing a battery relocation and I need to splice two 0 gauge wires together. Im not really sure how to... I was thinking about soldering them together with a propane torch, but is there another way? Also, where exactly does the power wire go to? The + side of the starter solenoid like...
  19. onefstsnake

    Axle Moving in and Out?

    Well Ive had my 31 Spline 5 Lug axles in for a while now. But when I had it on a jack a while back I noticed you can pull/push on the wheel and the tire/wheel move in and out maybe 1/4" and it makes a clunk noise. Im guessing its just some play around the C clips?
  20. onefstsnake

    New Pics of the Coupe and Vids

    Well 2 weekends ago we went up to MIR for the Bad Mustang Club "Get Out Of The Cold Cruise". We rented out MIR for a while and had somewhat of a car show. First time Ive had the car running since 06. After MIR we went to a hotel near Mason Dixon Dragway where we would be...
Top Bottom
Back
Forums
Menu