Search results

  1. Darek78

    Quick A/C compressor and PAG oil .....

    Hey guys i need some quick help :D My old a/c compressor locked up and i got a new one and i need to know how much of Pag oil to put in the new one :shrug: Some one told me to dump the oil from the old one to see how much it comes out and then put the same amount back ....but my old one is...
  2. Darek78

    Quick valve covers help

    Im trying to do research but no luck with it for now ....... back in the day i gote some tall steel valve covers that with my 1/2 inch spacer the fit and have baffles they are FMS ones ..... but now they are rusted and they are out of shape i changed the gaskets but they still leak i even...
  3. Darek78

    Quick valve covers help

    Hey guys what valve covers aluminium i can get from summitracing that will work and clear my rockers i have Ede Performer intake with 1/2 spacer steeda 19 cam Afr 165's heads and crower 1.6 roller rockers Stud mount ??? :shrug: thanks Derek.N
  4. Darek78

    oil question

    Thanks i know its not that important but i wanted to know what was recommended from the factory i also run Mobil 1 syn and i to go to Wal-Mart for oil :D thanks again
  5. Darek78

    oil question

    Hey guys can some one give me a answer what oil was recommended by factory for 95 gt's i dont have owner's manual but i would like to know is it 5w30 or 10w30 thanks
  6. Darek78

    Oil seperator fitting size .....

    Thanks
  7. Darek78

    Oil seperator fitting size .....

    Ok one quick question??? I got a Campbell Hausfeld in line filter i need a threaded side fitting size .... are they 1/4 inch or 3/8 threads ??? Thanks Derek
  8. Darek78

    Were can i get ......... ??

    Hey guy when i put my intake on i forgot to put the little breather under the grommet for the pvc valve :bang: my problem is that i put some rtv on the grommet and now when i tried to remove it it got riped :mad: i went to Auto zone and R&S and they don't have it they can't even get it for...
  9. Darek78

    Intake manifold differences?

    Edelbrock performer intake fits just fine under the stock hood even with a 3/8 spacer i just got one put on a week ago no problems :nice:
  10. Darek78

    I need some info (intake swap )

    5spd gt ..yes there was nothing to cut on the new gasket ..... when i looked on the old ones they had be cut out for the water port's the new one was ready to go no cutting it was worth it to spend some extra money :nice: and about the bolts i did use anti-seize on them :D and got them tq...
  11. Darek78

    I need some info (intake swap )

    Up date on the swap ...... For the first time it went pretty good :D the only thing is that i messed up was i forgot to put oil baffle on the lower intake :nonono: and i had to take it apart again :bang: Ported upper and lower Edi performer made a nice difference that i can feel :nice...
  12. Darek78

    I need some info (intake swap )

    :shrug:
  13. Darek78

    I need some info (intake swap )

    ok thank's for the replys on my car my EGR is disconnected i have no emission stuff on my car ..... the EGR is just bolted to intake and thats it :D if it's going to be in the way i will make some kind of a plate to cover the hole after the egr ... if that helps :shrug: so i should use...
  14. Darek78

    I need some info (intake swap )

    Ok thank you ....... thats all i need ... :) Derek.N
  15. Darek78

    I need some info (intake swap )

    Hey guys i just need some info on the intake swap ..... im going to replace my cobra with a ported Tmoss edl preformer intake to fit my afr's 165 heads ... my first question is how much torque to apply to the bolts on the lower intake ?? :shrug: second question is what gaskets to use...
  16. Darek78

    I got my AFR 165cc installed and Dyno

    Well i did not do any Data loging on with Tweecer while the car while was on the dyno :nonono: And i don't have any numbers before the head swap Car was dyno'd after head swap Grady I didn't do any thing to my spark tables on the Tweecer or my fuel tables the only think we did was the...
  17. Darek78

    I got my AFR 165cc installed and Dyno

    does any body have any other ideas what could be wrong with it :bang: I the lower intake the problem :shrug: i'm lost right now :mad: Derek.N
  18. Darek78

    I got my AFR 165cc installed and Dyno

    i paid around $1400 he got me all the gaskiets for intake, heads, heders, harden push rods intake spacer valve covers Dyno time i needed to ajust my exhaust also had to replace 2 bolts on the front brake caliper and the bracket they were striped and i think that was it Derek.N
  19. Darek78

    I got my AFR 165cc installed and Dyno

    Thats what i think to but i need some advice on the intake should i get it ported or get something else :shrug: when i first took the car for a drive with the new heads on it was a nice improvment good for the street but the numbers seem low Thanks Derek.N
  20. Darek78

    I got my AFR 165cc installed and Dyno

    Hey Guy's finally got my AFR heads from Kevin from K's Kustoms and got them installed on the car after the install we put the car on the dyno and this is what we got then we added few degrees of timing and the results are then we took 1 degree of the timing and this is the final result...
Top Bottom
Back
Forums
Menu