Search results

  1. S

    3 Speed Stick Shift ???

    I believe the 67 and later 3spds were the first to be fully synchronized. I swapped my first 3spd for a 3spd overdrive and it was really nice to have that extra gear.
  2. S

    Gt40 head info

    Three long dashes at the front of each head designates the GT40 heads. There are a few sets on ebay to get a picture. Don't get the GT40P heads.
  3. S

    original or mod???

    Mod it , enjoy it, keep the stock parts in the attic so you can pass them on to your kid one day.
  4. S

    Finally, gauge pods!!

    Right On!! May the Rice be with you.
  5. S

    what headers

    Give it more time and it will break for sure. The heating and cooling of the cable breaks it down and it will snap. You will know when the cable is heated up too much when one day you go out to your car and the clutch pedal is hard as a rock and you will need to pump it to break the melted...
  6. S

    Found some Bondo

    I am finally getting around to striping the old paint off my car when I found some body damage on the drivers door. There is a really thick amount of bondo and I was wondering if anyone has ever replaced the outer door skin on their Mustang and can elaborate on the extent of work needed for...
  7. S

    Stripping Paint

    I am doing the same project but instead of stripping the first few coats I an using a razor blade scraper and literally scraping the first 2-3 layers of paint off. Give it a try. I actually started with a new wood chisel and now I am using a the razor for the tight spots. The paint job on the...
  8. S

    price of a 8" locker pumpkin

    PM or Email me at [email protected]. Shipping will be around 45bucks.
  9. S

    price of a 8" locker pumpkin

    PM me, I've got a 8 inch Posi Trac 3.00 that is rebuilt w less than 2000 miles if you are interrested.
  10. S

    headers

    hedman elite 351 swap shorty headers
  11. S

    67-68 Turn Signal Hood.

    PM me or email me at [email protected]
  12. S

    67-68 Turn Signal Hood.

    Thanks that is what I needed to know :D
  13. S

    67-68 Turn Signal Hood.

    I am in the market for a 67-8 turn signal hood. I bought a 67 Shelby-stye fiberglass hood and now I want to go back to stock. I see the repo ones for 149.99 and the Ford tooling ones for a lot more. Has anyone actually compared the two?? I am sure the Ford tooling ones are well worth the...
  14. S

    driveline noise

    I had a very similar problem when I first installed my T5. After eliminating exhaust and driveshaft problems I got underneath the car with a rubber mallet and started bumping everything until I found the noise was coming from my new tranny mount. The mount was fine but for some reason when I...
  15. S

    Picking up a 67 Coupe w/351W

    How much is he asking??
  16. S

    Why did ford change the firing order for H.O. and 351 W motors?

    I had no idea that I could be running the wrong firing order this whole time. So with my setup of a late model 351W {serpentine stlye balancer} with a E303roller cam, should I be using the 1,3,7....firing order that on my Stealth intake??
  17. S

    3.31 to 3.00 gears

    Let me know if you want to take the 3.00s trac loc off my hands.
  18. S

    Two 67 Fastbacks for under 20K?? Worth Reading!!

    They are still emailing me for the wire transfer. There are a few crooks doing this scam and I hope no one is falling for it. I just floors me that the folks at ebay have not stopped this. The hijacking of Ebay ID's is bad enough but these scammers are really dropping Ebay's value in my eyes...
  19. S

    3.31 to 3.00 gears

    That is what I experienced when I went from 3.00s to 3.27 gears. Unfortunatly 1st gear is far too quick now and in the Winter I need to take off in 2nd gear.
  20. S

    Aluminum Radiator mounting...

    Those are the same rims I am buying. Did you get them from http://www.newstalgiawheel.com/default.asp ???? Call me Wednesday if you have the time to check out the radiator setup.
View older results
Top Bottom
Back
Forums
Menu