Search results

  1. A

    TRANNY HELP!!!!

    but the connectors are different can i cut and splice the new ones where the old ones are? and also there is a wire comin through where the shifter is....i bought the car like that no engine no tranny so im not sure if that is supposed to go to the tranny or something else....actually it was...
  2. A

    TRANNY HELP!!!!

    I need to know what i need to do to make a 2000 t45 fit in a 1996 gt...well i actually have it bolted up but the connections are different can i just cut and splice? also what do i need to do about the speedo? i know the 2000 has a electrical speedo and the 96 has a mechanical.....thanx!
  3. A

    PI ENGINE SWAP HELP!

    i dont know much about the non-pi engines but i heard that there is a spot on the timing cover where the coil packs go and the 2000 engine doesnt have it, so what do i have to do?
  4. A

    PI ENGINE SWAP HELP!

    Hey guys i bought a 96 gt shell and just got and engine and tranny from a 2000 gt yesterday....my questions are... 1. Should i use the new map sensors or the ones that should be on the 96(i have the 96 map sensors also) 2. Where should i mount the coil packs p.s i allready swapped the...
  5. A

    tranny question

    Hey guys i bought a 1996 gt with no engine or tranny and recently bought a engine with a tranny out of a 2000 gt that should be here next week. My question is about the speedo? Ive been reading things about mechanical and electrical speedos. Do i have to worry about this or will the 2000 tranny...
  6. A

    Anyone with a supercharger and nitrous

    i was also considering that
  7. A

    Anyone with a supercharger and nitrous

    Does anyone have a supercharger and nitrous??????....if so what kind of combo is it and who tuned you....i have a forged dss engine with ported heads cams bullitt manifold and a d1 procharger oh yea it has stock compression...laroccas in nj tuned me and i only got 510hp and like 420 tq at about...
  8. A

    procharger race bypass pics

    hey showstopper r u in the process of putting one of these on? if so where are you going to mount urs
  9. A

    where to get valve cover breathers

    yes i read his comment i would like to try and use two breathers or maybe go with the catch can in the future.....will i really mess up my rings? what would you do kilgore
  10. A

    where to get valve cover breathers

    thanx a lot for the info i think i found another breather for the other side and i will put it on later this week cuz my car is being painted due to some jerk backing up into it....anyway i hope thats whats causing my car to hesitate at low rpms
  11. A

    where to get valve cover breathers

    so now i have one breather and on the passenger side with the manifold blocked off and on the drivers side i have the hose on the valve cover going into my pipe that goes into my supercharger and its sucking in oil....this is how ive had it since i got my engine back in and it runs like...
  12. A

    where to get valve cover breathers

    yea but i have a supercharger and when i bought my bullitt manifold the pcv was blocked off
  13. A

    where to get valve cover breathers

    Where can i get some valve cover breathers for my 03 gt
  14. A

    procharger race bypass pics

    I had my car tuned at laroccas after i forged my engine ported my heads got cams and a bullitt manifold and only made 470hp....most of the reason was the lack of fuel but i just put in a kenne bell bap......but the bigger problem is driveability which laroccas said is due to my bypass valve so i...
  15. A

    canton oil pan help

    put the vice grips aroung the plug and take it out and put teflon tape on the threads...the white tape...it will keep it from leaking...i just did my engine and i noticed my oil pan was leaking from the same spot as yours and thats what i did...oh yea and i did it when i changed my oil so im...
  16. A

    canton oil pan help

    hey man i had the same problem and i couldnt fit a hed in there so i just used a pair of vice grips and put teflon tape on the threads
  17. A

    best injectors

    Hey guys i just wanted to know what are the best 55# injectors....i had 42s and the cobra pumps when i was making 390hp with a p1sc but now i just got a new dss shortblock with a d1...i plan on making over 500hp so im getting braided lines steeda fuel rails and maybe a kenne bell bap along with...
View older results
Top Bottom
Back
Forums
Menu