Search results

  1. NOSNotch

    PLEASE HELP just installed UPR coil overs and they rub on 245 tire!

    I put a set of coilovers on my 93 and ran into the same thing, was using a 17x8 wheel with a 245 up front and the tire was rubbing the spring, i switched to prostars, we just installed coilovers on an 86 with a 6" wheel and 225/15s and clearance wasnt an issue but not sure if you can make them...
  2. NOSNotch

    speaker recommendations for a 93 coupe??

    I've gotta upgrade the stock stuff in my 93, front speakers are garbage and the rears just arent cuttin it. Just trying to get some recommendations from you guys before i go to buy. I have a newer pioneer cd player w/50x4 peak & like 22rms, the car has dumps on it so its pretty loud inside and...
  3. NOSNotch

    Oil breather problems

    Just wonderin what oil breather anyones usin? I have a push in edelbrock one in my valve cover now and its doin its job but basically blowing oil down the valve cover and on my header. any ideas? thanks
  4. NOSNotch

    Good price on K member & longtube install

    My buddy has an 03 GT and he wants to get a tubular K & longtubes installed. Whats a good price to get this done? Also any advice on a k member brand? thanks kevin
  5. NOSNotch

    question for those who went carbed

    Mine still works, i guess your using a sumped tank now? Maybe something happened to the sender or maybe you forgot to plug it back in?
  6. NOSNotch

    EMISSIONS question

    Yah probably if you dont have much else done. If the exhaust is pretty loud you might be better off goin to a private inspection shop
  7. NOSNotch

    Where in or near central Jersey can I get a quality Roll Cage installed?

    WildRidesRaceCars.com they're up north a little ways but i've seen a couple of they're cages and they look great. Also heard good things about NeverLiftRacecraft.com, havent seen any of his work but havent heard any complaints
  8. NOSNotch

    South Jersey Guys

    West Deptford, Gloucester County here.......
  9. NOSNotch

    3.73's or 4.10's

    i second the 4.10s, my buddys got AOD now with 3.73s and he wants to go up to 4.10s
  10. NOSNotch

    HELP - Pulled Fuel Tank - No one carrys part

    local ford dealership should have it if not i know 50 resto carries em kevin
  11. NOSNotch

    Difference in Manual v. Auto Prochambers and h-pipes?

    Maybe someone with MACs can clear this up for sure but I think with the MAC headers the auto ones are kinda bent out wider to accomodate the AOD bell and the 5spd ones hug the block a little better. A few of my buddys are runnin MAC headers and have run into problems with different H pipes, i...
  12. NOSNotch

    do 94-98 gt wheels fit mark VII rotors??

    I had those wheels on the front of my coupe while i was waiting for my tires for my '98 split spokes and the centercaps fit w/no problem. As for the split spokes I'll have to put '95 stuff on to get the centercaps on. Good luck with it
  13. NOSNotch

    Cold start and running problem (Long)

    Thanks for the advice 5spd GT, Most of that stuff wont apply to me b/c it's all new, New IAC cap rotor and FRPP wires as well as new autolites gapped correctly and the tb is brand new as well. I dont really know where else to look and after the amount of time it took me just to get the car...
  14. NOSNotch

    Cold start and running problem (Long)

    Well over the weekend I put a new ECT in, thought maybe it might be partial to blame for the cold starting, also got a new ACT and plugged it in w/o installing it b/c i figured if the original was way off if the new one was just in the atmosphere it would make the difference if that was the...
  15. NOSNotch

    Cold start and running problem (Long)

    Sorry bout that last post guys. I do have the ACT sensor i was looking around where the stock airbox would be though didnt know it was in the intake. I put the scanner on the car again today and wrote down the codes just so I could clear that up; neutral switch ckt problem (used to be auto...
  16. NOSNotch

    Cold start and running problem (Long)

    Ok I have a new IAC, new plugs, wires, cap and rotor, new tb and new MAF so I've already kind of eliminated them as the problem My timing is set at 14 with the spout out. As for the motor its a 306, 10.5:1 compression, ported twisted wedges, 1.6 comp cam rockers, tfs street heat intake, 70mm...
  17. NOSNotch

    Cold start and running problem (Long)

    It has a new IAC on it and I adjusted the TPS voltage as well. No vacuum leaks and no codes I didnt expect (smog, purge solenoid, egr control solenoid) I was thinking it could be a problem with the ECT since that is really the only sensor that is not new. I couldnt get any data from the scanner...
  18. NOSNotch

    Cold start and running problem (Long)

    I've got my new motor and all in my coupe and i've yet to have it really runnin right. First problem is with cold starting; it doesnt want to stay running until it gets some temperature in it. I have to keep feeding it gas and revvin it for a few minutes before it'll hold an idle on its own...
  19. NOSNotch

    Thinking about coilovers up front, opinions please

    I have a PA tubular k and a arm setup up front in my coupe and now that the drivetrains in with the front eibach springs the car is sitting lower than I'd like with the 17s on it and I'm a little concerned about the tires rubbing the fenders. So I'm thinking about pulling the Eibachs and...
  20. NOSNotch

    98 17" GT wheels with MarkVII 5 lug??

    Whats up everyone, i've got MarkVII stuff up front on my coupe and I just got a set of 98 GT wheels off a buddy of mine. Was wondering if anyone has made these work so the centercap will go on? I've already read all thru Matt's 5 lug swap site but if someone has modified their spindle at all to...
Top Bottom
Back
Forums
Menu