Search results

  1. J

    Hot idle problems... (searched)

    I've searched and ive gone over the surging idle checklist, and i cant figure it out When i start the car cold its fine, idles like a champ doesnt die When the car is warm it will still idle fine at stop lights such, but if the car is turned off, and then turned back on while warm, the...
  2. J

    H/C/I Install Progress (Dial up warning)

    UPDATE A little bit of bad news.... (just to let you know there WAS another owner of this car incase you were wondering...) Very nasty leak ( i knew there was a leak but we thought it was the rear main, keep looking at pics) The flywheel... And the crack in it... so now i...
  3. J

    H/C/I Install Progress (Dial up warning)

    i forgot about ebay... where are my manners... :D
  4. J

    H/C/I Install Progress (Dial up warning)

    Whoops, the 96-98 is the one with that black lines in the middle, this is ours Lights $299 though? Id hope i could find a junk yard pair....lol
  5. J

    H/C/I Install Progress (Dial up warning)

    Tail lights wernt my choice, they came on the car when it was bought :( lol i kinda wish i could find a junk yard set, but doesnt the "plate" that goes around them (and inbetween the sections of the light) need to be painted? The car does not have the stock paint job wouldnt have been my...
  6. J

    H/C/I Install Progress (Dial up warning)

    You guys might not have remebered but ive chimed in with some questions from time to time... Heres some progress Pics.. <div><embed src="http://widget-ae.slide.com/widgets/slideticker.swf" quality="high" scale="noscale" salign="l" wmode="transparent"...
  7. J

    Question about checking piston to valve clearance

    one more question, im looking for a magnetic drain plug, and i cant find the right thing.... Summit says 1/2in 20thread and advance auto parts says 14mm x 1/2in Anyone like to share what the right thing is :rlaugh: thanks
  8. J

    Question about checking piston to valve clearance

    well it shouldnt be too long till we start... we just finished putting on the new valve springs i bought for the heads (the comp cam 29618 beehive springs), figured i might as well because they will be able to handle it if i wanted to put a different cam in down the road, and they control...
  9. J

    Question about checking piston to valve clearance

    well, since i bought new lifters, were just gonna use an old one and turn it into a solid lifter for checking thanks for the help
  10. J

    Question about checking piston to valve clearance

    When you check it is it a good idea to use the new head gasket, or use the old one (if in decent condition)? I have the trickflow H/C/I kit and was wondering before we actually did it, cause i dont want to mess up that Sealing stuff on the new gasket. thanks
  11. J

    Need some help with parts

    thanks for all the help guys, should start the buying here soon, gotta shop around i will keep updated when the buildup starts and as always if you have an suggestions go ahead and throw them in
  12. J

    Need some help with parts

    well i was actually trying to keep the egr hmm i thought some people were gonna say that about the C&L meters... only thing is the pro-m's are expensive.... For the injectors would you guys suggest ford racing, or go with another brand... (i was gonna go with the ford injectors but just read...
  13. J

    wheel spacers?????

    i went with the 1in as well I ordered them from Maximum motorsports but there acutally H&R's which is fine by me... Ive had no problems so far and well... Therian said it best
  14. J

    Need some help with parts

    Thanks for the help so far guys... I have a few more questions -Alot of you say just go 255lph, is it putting more of a load on the electrical system sending that bigger volume of fuel constantly? -Do you think i can get the professional products throttle body elbow, along with the egr...
  15. J

    Need some help with parts

    Current mods: Aftermarket shorty headers (i believer there mac, they came with the car when i bought it) Offroad H-pipe CAI kit UD pullies Flowmaster exhuast (not sure, but i believe there the 40 Series Delta Flow) 3.73 gears Fluidyne Radiator Ok, This is what im planning to do...
  16. J

    EBC Red Stuff Pads

    (double post sorry)
  17. J

    EBC Red Stuff Pads

    Im trying out the EBC Greenstuff pads front and back right now, and i like them so far.... Defintly gave a noticable improvement (got both set of pads for 117 shipped)
  18. J

    Aftermarket Aluminum Radiators for 94 / 95 cars?

    well right now im i have a pretty much stock motor, i mean its got underdrive pullies, cold air, headers (and then exhaust), but as for the future id like to keep it a 302 and go twin turbos but.... well see what happens (im only 16 right now this is my dads name i still need to make my own)...
  19. J

    Aftermarket Aluminum Radiators for 94 / 95 cars?

    i just got a Fluidyne for a 94-95 and it works really great (got it for christmas). its a 2 core, direct fit and fits well, its was just a PITA to get in,but the only thing as far as mounting is the mounting brackets on top are a tiny tight and the reserve bottle and ccrm mount is tight too, but...
  20. J

    paper towel in motor URGENT

    LOL:lol: edit: and you might have lost some headlight fluid too....
Top Bottom
Back
Forums
Menu