Search results

  1. P

    Car falling on face after install of mods

    I have a SN95 with which i just installed some mods. I installed P heads w/1.6 rr's, a typhoon intake, a crane 2030 cam, 30lb injectors, 30lb calibrated MAF, shorties, bassani o/r x-pipe, and mac pro dumps. The car has the smog pump and egr removed. The car had some trouble firing up...
  2. P

    GT40 heads?

    Take a pic of the ends of the heads and post it on here. You can look at the casting and if you see 3 vertical lines on the ends of the casting, and GT40 is in the casting near one of the springs.
  3. P

    400WHP with Procharger?

    Oh, and what are you using for fuel delivery?
  4. P

    400WHP with Procharger?

    The Felpro will work just fine. Its a common name in Mustangs when it comes to gaskets. My opinion is that the shop is full of ****t! They either don't know how to tune their way out of a paper bag OR the car was having compression issues because of the leaking head gasket, which caused the...
  5. P

    400WHP with Procharger?

    Something is definitley not right. Who flashed his ECU? That may be something to look at. After you have researched that, i'm sure a decent cam would liven things up. Back to the tuning; who did it? Were all the mods on the motor at the time? Has the car's performance slacked off over...
  6. P

    BBK upper and lower control arms?

    How much are they? I would just spend the extra money and purchase adjustable lowers and then a panhard bar. You will see such an improvement over the traditional rear suspension set up.
  7. P

    Cam Gears

    Thank you for your response. Yes, I realize they are loud, but with a blower and dumps, the noise really is no longer a factor. I want to make sure they will fit under the stock timing cover. Does anybody know the answer to this? I am not getting a decent response from the timing gears...
  8. P

    Cam Gears

    I searched the 94-95 forum and found that a few people have their opinions on the reliability of going with timing gears instead of a timing chain, but my question is if anybody has actually installed timing gears on a SN95. For my own reasons, I want to run the gears setup, and would like to...
  9. P

    P-heads w/1.6 rr's and crane 2030

    Alright, in all honesty, this thread is dead. I have become bored with this silly arguing. If you want to continue on, I'm sure we could go create a thread in a off-topic forum.
  10. P

    guys that have removed their smog pump.

    Well, don't forget that the smog pump runs piping to the back of the heads. You can solve this issue by removing the piping, cutting the piping off at the connecting adapters and then turning the adapters around before re-installing them.
  11. P

    P-heads w/1.6 rr's and crane 2030

    Nice last comment. A little FYI for your Kerry-supporting ass, a chick who knows nothing about this little 'situation' we have going on here just read the thread and came to the conclusion that more than likely you are gay. But, hey, that's not my business. You are simply an evolutionary...
  12. P

    new member, here's some pics of my stang

    A bigger throttle body is always a good idea. BUT, unless you install an intake that also has a larger opening, you are going to have a bottleneck in air flow. You might even lose some power by going too big without compensating for it in other places related to air flow. I'll telling you...
  13. P

    new member, here's some pics of my stang

    My recommendation would be holding off on the asthetic mods for a bit and throw a few cheap motor mods on. Pick up some underdrive pulleys and some shorty headers on ebay. Go with headers for an 87-93 fox, that way you won't have to mess with the EGR garbage. A very simple metal plate can be...
  14. P

    P-heads w/1.6 rr's and crane 2030

    Where's my favorite lil' buddy at? I haven't been insulted today, so I was looking forward to checking in tonight and finding some good drama................... Thanks for the reply about the fox body valve covers, and good one about my lap times being faster than some people's quarter mile...
  15. P

    Need some advice on fuel for S/c

    :stupid: I know you appreciated that one. I agree, don't even bother with the FMU. Most of your fuel upgrades that are needed in order to run a blower are able to be put on a stock car. The larger injectors and MAF can be purchased and not immediately installed...
  16. P

    P-heads w/1.6 rr's and crane 2030

    Here's the thing, I really do not want to spend much money on valve covers. To me, I see them as a functional part, not a visually pleasing part. Valve covers can look great, but at the same time, I don't really care about that. I was trying to finish off the install before Monday, which is...
  17. P

    P-heads w/1.6 rr's and crane 2030

    Thank you for offering some assistance. I originally did not intend on offending you personally. For that, I apologize. I just have some major issues with many law enforcement officers. Maybe you are the cop that would change my attitude towards police officers. Maybe you really do help...
  18. P

    P-heads w/1.6 rr's and crane 2030

    HOLY CRAP!!!! DO YOU SEE HOW POSTS I HAVE NOW?? Soon I will be at your level with post-worthiness.
  19. P

    P-heads w/1.6 rr's and crane 2030

    As for the cop. How's your career working out there buddy? Making some good money? Oh wait....................you don't make any money. Oh well, get back to 'helping' everybody and take as many thank you's as you can get.
  20. P

    P-heads w/1.6 rr's and crane 2030

    Thanks for the answer :banana: :spot: :owned: :lock: :bang: :flag: :D :rolleyes: :( :notnice: There you go 'sparky'. Oh yeah, by the way, which gauges should I put in my car???? And i was thinking about dying my interior neon red to match my super-awesome euro tails. How...
Top Bottom
Back
Forums
Menu