Search results

  1. T

    Alternator trouble shooting

    I keep blowing alternators and I'm trying to figure out what the hell is going on. Does anyone have the troubleshooting directions for the alternator circuit? I'm using a 3g alternator on a 351w in a 91 fox. Thanks
  2. T

    Cam Install ? - thrust washer

    My boy is doing a Trick Flow top end cam install TFS 1 on his bolt on 302 and he asked me if he needed to use the thrust washer that came with the kit. The stock cam didnt have one and the retainer plate was flush with the block. Is this a situation where you measure with the timing set on to...
  3. T

    What Octane?

    I have a 420 Windsor that is at a 13:1 compression running a locked out timing of 38deg and around 28deg on a 250 fogger shot. I have a seperate tank for the nitrous and was thinking about having 110 in that tank. Not sure if I even need that much? What Octane should I be able to get away...
  4. T

    sparkplug reach

    How can I measure what the correct reach sparkplug should be? Motor is a 420w (4.10 x 4.040 6.2 rods) AFR 225 heads 58cc
  5. T

    2 Step for High Stall

    Hey guys, new at this auto thing. What is a good rule a thumb (if there is one) for the 2 step for an auto? I've got a 4800 stall and not sure what RPM to set it at? I also have a transbrake on it if that makes a difference
  6. T

    Line Lock....Is this right?

    Looks a little wierd to me....Is this right?
  7. T

    Water Flow / Sensor Placement

    I just bought a new notch and the intake setup is a little different than I'm used to. There is no water neck for the upper radiator hose and no T-Stat housing. Usually I place my temp sensor in the driver side corner of the intake like all other cars, but if you look at the picks this setup...
  8. T

    Rear arm?

    What is the name of the small arm just next to the rear tires?
  9. T

    185 on a 6 or 6.5 rim

    Will it fit?
  10. T

    Couple pics of the stang

    Just got the Stang back on the road. Let me know what you think
  11. T

    No turn signals

    Hazards work. For some reason niether of my turn signals work. Anyone have a wiring diagram or point me in the right direction? I found the one that pins out the switch but where are the actual relays and where is the common point for both left and right? Thanks.
  12. T

    ARP head stud torque

    Looking for head stud torque specs for a 351w with aluminum heads, should they be the same for a stock motor?
  13. T

    69/70 351w intake milling required?

    Just wondering if anyone has tried using a 9.5 deck intake without milling for the shorter height on a 69/70 windsor?
  14. T

    Rear disc/axle question

    I bought a rear disc conversion a while back for my 89 fox, all SN95 parts with the longer axles. I never got around to installing it though. Since then I have bought 35 spline Moser axles, will the brackets and calipers still work with the new axles?
  15. T

    White fox, black hood

    Looking for pics of white foxes with black hoods please. I figure while I search through the 65 pages of fox pics someone could help me out. Thanks!:nice:
  16. T

    Cowl hood pics

    Trying to decide between extended or not for my cowl. Post up some pics please
  17. T

    Wheel Slimming???

    I'm sure we've all seen or heard of people having thier wheels widened by an inch or two. Has anyone seen someone take a production wheel and make a skinny out of it? I love the look of my wheels, originally I was going to powdercoat some prostars but how cool would it be to create a skinny of...
  18. T

    302 to 351 timing cover

    Just wondering if my timing cover from a 302 will fit a 351.
  19. T

    C4 or Glide

    I'm in the process of building a turbo windsor and my target is about 700hp street driven. Can you guys give me some pro's and con's of each for a steet car. Now this is not a daily driver, only a "night time" weekend vehicle so no AOD opinions please. I'd appreciate any feedback. Thanks.
  20. T

    Gauge isolator fluid?

    I've got a pressure gauge isolator that the green fluid emptied out it. Is it a special fluid or can I replace it with something else?
Top Bottom
Back
Forums
Menu