Search results

  1. Last5.0

    Changed Steering Shaft now Steering Wheel Off Center When Driving Straight

    I installed a Borgenson steering shaft a couple years ago and ever since my steering wheel is clocked about the 10 o'clock position when going straight. It does not pull and alignment is fine and in spec. If I remember correctly, the shaft only bolts on one way at each end because there are...
  2. Last5.0

    best 1250 intake gasket prep method (rtv/sealant)?

    I've never used anything on them, just in the corners of the front and back pieces of the lifter valley, where the gaskets meet
  3. Last5.0

    Whis is pressure blowing out oil fill tube??

    I pulled the valve covers to install a baffle under the oil fill tub to keep the oil from spraying out. I still get pressure blowing out the fill tube while running. The motor is seeing about 15" of vacuum at idle and the pcv valve is working. I pull the vac hose off the vortech bypass valve and...
  4. Last5.0

    TKO-500/600 install

    I've seen a few posts lately concerning these trannys and I'm thinking about buying one instead of the G-Force I had planned. I have longtubes and the McLeod SFI bellhousing that has the 1/2" sliding backer nuts on the one side and is supposed to be able to use a t-5 or tremmec with it. Does...
  5. Last5.0

    Longtube questions...Have both SN95 and FOX specific ones

    Ok, I have a '95 that I'm putting longtubes on. I have two sets....one is made specifically for a '94/5 and is 1 5/8" with 2" collectors and the other is for a FOX but in 1 3/4" and 3" collectors. With my mods, I'm wanting to go with the 1 3/4" but I noticed a few differences....First, no EGR...
  6. Last5.0

    Timing Gear install question

    I installed a Comp Cams double roller timing chain set, but when I torque the bolt down on the cam gear to spec the back of the gear rubs the cam retainer slightly (no end play). Is this ok?? The stock gear is shaped differently on the backside and actually has a ridge that buts up against the...
Top Bottom
Back
Forums
Menu