Search results

  1. Markus

    little preload on master cylinder with hydroboost?

    Hello guys, today i have changed the master cylinder on my 2003 GT and i noticed that i have little preload on the master cylinder. About 0.04-0.05 So i checked this on my old (stock) mc and there is the same preload. Is that correct with hydroboost brakes? thank you Markus
  2. Markus

    Nu-relics Power Windows

    Hello guys, i have the idea to install nu-relics power windows in my 67 fastback. I´m afraid that i have space problems with the deluxe doors. Interference windows motor and speaker. Have one of you experience with this power windows and the door speaker and courtesy lights? My door speakers...
  3. Markus

    C4 Shift Improver Kit Question

    Hello guys, next weekend i like to install a b&m shift improver kit. My 68 Mustang is a daily driver and weekend cruiser. Now i don´t notice the shifts. It shift very very smooth. The transmission is rebuild. I like more firmer and crisper shifts. My question is, should i choose the stage 1 or...
  4. Markus

    67 Mustang Fastback Walk Around

    Hi guys, on sunday i took a little time to film my car. Here is the result. walk around my 67 fastback Attention, the complete file is very big !! thank´s Markus
  5. Markus

    Intake Flow Numbers ?

    Hello guys, in the next days i start with a new project. At the moment i have a gt40 tubular multi point efi on my 331. Now i convert to a msd atomic efi tbi. I use for this a weiand stealth intake manifold. In the past i thought that my gt40 lower intake was the bottle neck. Do anyone know...
  6. Markus

    Fe And Tremec 5 Speed Question

    Hello guys, i run a 331 with an "old" 3550 tko for years now. The transmissions have a long (7.2 inch) input shaft. In the near future i like to convert my 67 fastback to a big block car and like to reuse the transmission with a quicktime bellhousing. Here is my problem. I´ve heard that i need...
  7. Markus

    photo shooting for a magazine

    Hello guys, my car was in november in a us car magazine called "street" here in germany. I have done the pictures online. http://212.227.100.192/mu...allerys/Street/index.html i wish you a happy new year Markus
  8. Markus

    question about zddp additive

    Hello guys, will hurt such a zddp (zinc) additive o2 sensors :shrug: thank´s Markus :flag:
  9. Markus

    need help with destroyed roller cam

    Hello guys, today i pulled my dizzy and found a slightly worn distributor gear. :mad: Ok, not the problem. New gear on and go. BUT... i looked down to my 20.000 miles old custom cam and found a total worn out cam gear :shock: I never seen this before on all my mustangs. The specs of the...
  10. Markus

    question about dui distributors

    Hello guys, have anone experience with the dui (davis unified ignition) Hot Forged Distributors for 5.0 efi mustangs? I need a new one and heard no good things about msd dizzy´s. I like to buy a aftermarked billet bling bling but i don´t know what.:nice: msd, mallory, accel or dui...
  11. Markus

    reproduction 67 center console?

    Hello guys, i like to buy a reproduction center console for my 67 mustang. Have anyone such a repro console i his mustang? How is the quality? thank you
  12. Markus

    CFM flow rating question

    Hello guys, where is the primary bottle neck? Is it my 65mm ford racing throttle body or is it my (unported) gt40 tubular intake? :shrug: Any idea? thank´s Markus
  13. Markus

    hydroboost conversion

    Hello guys, i have a hydro booster out of a 03 mustang lying around. I like to build it in my 67 mustang. :nice: But the 03 master cylinder flange is roughly vertical. My wilwood master cylinder have a horizontal flange. My question is now, can i flip the booster about 90 degree without to...
  14. Markus

    march crank shaft pulley question

    Hello gals and guys, I need the dimensions and measurements of the march crank shaft pulley #2033. Diameter, deepness and the location of both serpentine grooves. On the march web side i found no information and the tech support don´t answer on my quests.:notnice: I know the pulley is a part...
  15. Markus

    new manual steering box or tcp manual r&p

    Hello guys, my old long shaft steering box is worn out and i have a lot of play in the steering wheel. Now is my question, should i buy a new flaming river steering box or should i go with a tcp manual rack and pinion conversion? For less play in the steering is the r&p the way to go, is...
  16. Markus

    Bear brake experiences

    Hello, do anyone have experience with the bear serious street front brakes with 11 inch rotors and pbr caliper? :shrug: thank you Markus
  17. Markus

    professional photo shoot with my 67 fastback

    Hello guys, i must show you the best photos i have ever seen from my 67 fastback. A american guy here in germany shoot my car. He made 260 photos. A few you can see in the following photo slide show. 67 fastback slide show Thank you for looking :nice: Markus
  18. Markus

    WOT voltage issue

    Hello guys, my car run´s at wot too lean since 2 weeks or so. Yesterday i logged the data with my tweecer rt and i saw that my voltage dropped the higher the engine rpm is. At idle with lights on 13.6 v at 1500 rpm 13.5 v at 2000 rpm 13.2 v at 3000 rpm 13.2 v at 4000 rpm 13 v at 4500 rpm 12.8...
  19. Markus

    how much bumpsteer is too much?

    Hello guys, i installed today the tcp bump steer correction kit on my 67. I have checked the toe in and out with 2 inch compression and 2 inch rebound. Without spacer on the corrector i measured 0.3 inch toe in @ 2 inch compression and 0.55 inch toe out @ 2 inch rebound. With 0.75 spacer i...
  20. Markus

    331 with GT40 tubular

    Hello, anyone with a tubular gt40 intake on a n/a 331/347 ? What numbers are you make with your combo? My torque is fine but my hp´s are a little low. I think the flow through that intake is not big enough for a stroker. I know that other intakes make more hp @ higher rpms but my own red...
Top Bottom
Back
Forums
Menu