Search results

  1. 84convertablegt

    Is 300hp/tq reasonable with my combo?

    Here is my combo and Im hoping to get almost 300hp out of it. Stock cam, AFR 165 heads, ported cobra lower, fox cobra upper, 70mm tb, 24lb injectors. I think I will probably end up just shy of 300rwhp, but it will be close enough. That 300 mark is the magical spot, and getting over 300rwhp on...
  2. 84convertablegt

    Spacer needed for tall ford racing valve covers?

    I am planning on running tall ford racing valve covers. I have done a foxbody cobra intake conversion. I know i will need a spacer. do i need a 1 inch or a 3/8 inch and the big question is how much can i fit under a stock hood? if this all wont fit, its gonna scrap my plan. any help is...
  3. 84convertablegt

    in the middle of a intake swap

    let me clarify something that could be misleading about the picture above. it says in the pic that the feed is for the "egr system". DO NOT connect this line to the egr valve, it connects to the red line. the red line is the feed which goes into the firewall, the green line connects to the egr...
  4. 84convertablegt

    in the middle of a intake swap

    OK, lets see if i can help since i just did this. first of all, that nipple on the cobra upper isnt for coolant, it is for vacuum. The green line connects to the egr valve. yes, the fox body egr valves had a vacuum line connected. the red line is the feed line. i used that nipple on the cobra...
  5. 84convertablegt

    stock TB size

    All 94-95 stock TB's were 60mm. Even the cobra had a 60mm TB.
  6. 84convertablegt

    289 vs. 347

    or you could stroke your 289 to a 347, but id leave it be.
  7. 84convertablegt

    Quick question, what size are throttle body bolts?

    im putting a foxbody style explorer intake onto a 95 mustang gt. there were no studs originally :)
  8. 84convertablegt

    Quick question, what size are throttle body bolts?

    anyone????
  9. 84convertablegt

    Quick question, what size are throttle body bolts?

    Im getting ready to go to the store and buy some bolts to attach tb and egr spacer to intake. what bolts do i need? im gonna use bolts instead of studs. anyone know the length and size off hand? also, i need to pick up some bolts to attach the throttle cable bracket to the egr spacer, this is...
  10. 84convertablegt

    Power Elbow

    not on a power elbow. the bolt pattern of a fox body tb and a sn95 tb is different. th sn is slightly wider with the bolt holes, but i bet you could widen up the bolt holes and make things work. maybe even keep the sn95 throttle bracket, but i dont know how youd mount it. just an idea.
  11. 84convertablegt

    Let me see your intake plaque

    looking for anything besides the flaming pony, mustang 50 ho and fake cobra 50 ho ones that everyone has. ive seen all of these and am not real impressed, im looking for something a little more custom.
  12. 84convertablegt

    Let me see your intake plaque

    Im converting to a Explorer intake on my 95 GTS and therefore will be needing a 86-93 style intake plaque. Im looking for ideas, I dont care for the explorer intake cover plate, but do kinda like the standard 5.0 HO factory one. Im looking for ideas on what to use. does anyone know of any good...
  13. 84convertablegt

    Power Elbow

    just use fox stuff, the cables are completely different though. it would take a lot to modify a sn cable vs. just getting a fox cable. the connectiion on a foxbody cable uses a snap on connector and an intergrated spring completely unlike the sn cable.
  14. 84convertablegt

    Thinking about changing over to 93 throttle body?

    u can get the iac motor and tps from advance yes. but they arent cheap. a junkyard is the cheapest route. if you dont want to use a egr spacer, youll need a egr delete plate so you have a place to mount the throttle bracket too. oh yeah, you need a throttle bracket and 86-93 throttle cable as...
  15. 84convertablegt

    Power Elbow

    different throttle cable and bracket, different tps, different iac motor but same plug, different throttle body, but id recommend it for you with a nice fat 80mm throttle body. im assuming you dont have egr or anything so no issue there. the main thing is the throttle cable, u need one from a...
  16. 84convertablegt

    Thinking about changing over to 93 throttle body?

    I wasnt referring to your post at all. I was just looking for advice on this subject. I like your idea, but i dont have the skills personally or the equipment to fab up something real nice like that. i do like the black silicon connectors idea. Im just looking for someone who may have been in...
  17. 84convertablegt

    GT-40 Intake: Keeping EGR

    u can also cut the tube apart, use to 2 fitting on the ends and buy some soft copper 5/8" tubing and bend it to fit and then flare the ends, basically making a new egr tube. i decided to just do the 93 style throttle body conversion, so ill be running internal egr. much easier than external if...
  18. 84convertablegt

    Thinking about changing over to 93 throttle body?

    a question about intake tubes. i am also converting to an explorer upper and 70mm accufab tb. i am using the bottom of my 95 cold air intake and my 95 maf, but it looks like a fox body maf tube wont make the distance to the tb. i was thinking of trying a speed density car tube to see it that...
  19. 84convertablegt

    Question about flow potential of explorer vs. cobra

    wow, that is definately interesting. i guess i dont have to be worried about losing anything then. In fact, i will probably gain some throttle response and maybe a few hp.
  20. 84convertablegt

    Question about flow potential of explorer vs. cobra

    thats good to hear, especially since my lower has been ported and matched. anyone else care to comment on this.
Top Bottom
Back
Forums
Menu