Search results

  1. F

    What Can I Expect From A 99gt Vortech

    99GT 2v vortech S-trim with powercooler (air to water intercooler), crower cams (something like 570 lift, 224ish duration), X-pipe with I believe high flow cats and short tube headers. I'm looking at buying this car, it feels real strong in 2nd (1st it just spins) but for some reason 3rd and...
  2. F

    Cobra bellhousing

    For TKO or TR-3550 transmissions (same as used in cobras). Had a small crack that was professionally welded. Is ready to bolt on. $100 obo $200 new from summit: Ford Racing M-6392-R58 - Ford Racing Bellhousings - Overview - SummitRacing.com
  3. F

    Cobra bellhousing

    For TKO or TR-3550 transmissions (same as used in cobras). Had a small crack that was professionally welded. Is ready to bolt on. $100 obo $200 new from summit: Ford Racing M-6392-R58 - Ford Racing Bellhousings - Overview - SummitRacing.com
  4. F

    Tranny/clutch swap, need torque specs

    Need torque specs for: Flywheel bolts Pressure plate bolts Bellhousing to engine bolts Tranny to Bellhousing bolts and anything else I might be forgetting, thanks
  5. F

    Someone buy my damn wiring!

    ahhhhhhhhhhhh!!! :crazy:
  6. F

    General SVO info needed

    I know next to nothing about these cars, found an 84 SVO for sale in decent condition. Wanted to know general stuffs about them, how quick are they stock? What is the stock turbo capable of, and stock engine internals? Did they use a blow-thru on the 84s? Thought EFI wasn't until 85-86...
  7. F

    Good SoCal trans rebuilders

    Have a tremec 3550 I need rebuilt for my 95, anyone know of any good rebuild shops in So-Cal or any places I can purchase general rebuild and hard parts from?
  8. F

    Fox body TB swap?

    I picked up a 93 cobra intake cheap recently, I was going to get an elbow for it but realized it'd be easier and cheaper to just go with a fox TB. The EGR is already on the manifold and I think the sensor is the same correct? What is involved in the swap? How do you hook up the throttle...
  9. F

    Tremec trans in 94-95 (also rebuild cost?)

    I might be able to score a tremec 5 speed out of a 93 cobra for around $150... problem is the guy says it was ran out of oil and 1st and 2nd are making some god aweful noise above 2k RPM.... so obviously it's gonna need a full rebuild with bearings and probably some hard parts.... Does anyone...
  10. F

    Hot running Turd

    brought my car to a open track even for some driving (ThunderHill) today and I found out the marginal cooling system is worse than I thought, about 15 minutes into a run it was time to get off because it was HOT.... This car has always made heat (no power though :rolleyes: ), seems to get hot...
  11. F

    What's it take to crack 13s

    Or at least 97-98 MPH in the 1/4 with a stock motor with bolt-ons? Can it be done with stock heads and cam? The first 1/4 mile performance of my car was dismal, managed a [email protected]. Current combo is 150k short block, rebuilt stock heads (recently) Jet Chip Crank and waterpump...
  12. F

    Infineon Raceway Tomorrow...

    Be there or be square :D. I'll be there with my white 95...
  13. F

    Good deal?

    Is this thing a real one? http://sfbay.craigslist.org/sby/pts/389256415.html
  14. F

    Anyone make the switch to synthetic?

    got a 150K mile bottom end, this is the first oil change i'll do since I've bought it and I have no idea what kind of stuff they had in it before. Are the rumors true will a high mileage non-synthetic run motor leak like a sieve if you put synthetic in? I think it's an old wives tail...
  15. F

    Professional products balancer

    Junk or not junk... only $79... anyone use one before?
  16. F

    URGENT: San Diego guys

    need a 23 tooth speedo gear for my 95 (just did a 3.73 gear swap) by friday, any sources locally?
  17. F

    URGENT: Speedometer gear

    Hey guys just finished a gear swap from 2.73s to 3.73s, obviously the speedo is way off. Does anyone know what speedometer gear (VSS gear) count i'll need for the new combo? Tires are 245/45 R17s. I need to do this today and the ford dealership closes at 5 (less than 2 hours).
  18. F

    What weight balancer?

    time to order a balancer tomorrow, what weight do these cars take... I heard someone say 50oz is that right?
  19. F

    V6's use 8.8s?

    Well doing a gear swap on my 95 and I find a bad axle... it'll be 80-120$ for a new one and i'd just as soon find one at a JY.... I know where there is a 98 V6, but would it have the same axle? Would it matter if it has ABS or not (mine doesn't). I know ABS has the magnetic wheel but is...
  20. F

    no such thing as 94-95 K&N CAI?

    I'd like to get a CAI for my car but i'm only going to spend good money if it has a plastic intake tube (heat transfer reasons). Otherwise i'll just get an e-bay special.... so the K&Ns have the plastic ones but so far it appears the 94-95 kit doesn't have jack in it... what gives? Do they...
Top Bottom
Back
Forums
Menu