Search results

  1. ram360

    Headlight switch problems (94gt)

    I replaced the switch w/ a new one and replaced the melted harness connector. It appears to be working now. Hoping it was just the bad switch that melted the last connector. Worst case, I'll add a relay if something happens in the future but for the mean time I'll leave it be. thanks!
  2. ram360

    Headlight switch problems (94gt)

    So my headlight switch went bad. basically my headlights come on but my dash and taillights don't w/o me finding the sweet spot on the switch to make everything come on as it should. Sooooo I pull the switch out today and notice the plastic connector that plugs into the headlight switch is...
  3. ram360

    Door Lock Issues Please Diagnose

    no I haven't tried that..... but I will, thanks for the tip!
  4. ram360

    Door Lock Issues Please Diagnose

    checked the wires and they are testing fine, goes 11.xx v then when I press the button 0. IDK I know the driver side actuator is good b/c it opens up w/ the fob just won't lock w/ it..... and the button on the door will not do anything at all??? I just don't get it...
  5. ram360

    Door Lock Issues Please Diagnose

    good deal, I was thinking it was something to do w/ the door switch but didn't know what to test. I'll get on it tomorrow and see what I come up w/. thanks guys
  6. ram360

    Auto Stalls when put into Drive or Reverse

    Car has an FTI cam running just over .600" lift. I reset the idle and replaced the torque converter on the car. Car now idles cold w/o giving it gas, shifts in gear w/o stalling too! Adjusting this idle helped a great deal. Problem solved. thanks hissin:nice:
  7. ram360

    Door Lock Issues Please Diagnose

    I have been having some issues w/ the door locks (94gt). Basically they both lock/unlock w/ the key just fine. Only the drivers side opens w/ the key fob. None of the doors lock w/ the key fob and the door lock switch inside the car will not lock or unlock the doors at all. I can hear a...
  8. ram360

    4rw70 trans massive fluid leak

    Seals were all ok....turns out my converter is cracked....little more than a year old Precision industries 3200 stall...Clearly a failure in the case. Thing looks brand new w/ the exception of the crack. Spoke w/ jack from PI and he said send it back and he'll have a look at it. Will try to...
  9. ram360

    4rw70 trans massive fluid leak

    good deal thanks for the pics....Well, going to pull the trans (hopefully before the wknd) My trans guy said if it's the seal and or tc bushing he'll do it for between $10-$50 and do it right then and there. So that's good news. This guy races every weekend and specifically does race...
  10. ram360

    4rw70 trans massive fluid leak

    I'm not sure how it could happen but it's def inside the bellhousing. I did check the dipstick and lines. I ran the car for literally 15 seconds and it dumped out over a qt and a half all within the bellhousing. Will see if I can get in contact w/ the trans shop that did the work. If not I...
  11. ram360

    4rw70 trans massive fluid leak

    I refilled the trans and started the car...The atf poured from the bellhousing it's coming from the rubber access plug. I guess it's a seal of some sort that blew out on the input shaft of the trans? Looks like I need to pull the trans :nonono: That a common problem? :shrug: thanks for the reply...
  12. ram360

    4rw70 trans massive fluid leak

    So I'm driving and decide to get on it a little from a 30mph roll. Car is 94 gt w/ 4rw70 trans (shift kit, atco clutches, 3200 stall) . car shifted fine, no noises, anything unusual. Trans was totally build less than 12k agao. I look in my rearview and see this huge clowd of white smoke...
  13. ram360

    Auto Stalls when put into Drive or Reverse

    haven't pulled the codes. Can autozone scan OBD I systems? Is there some way to pull the codes w/ a test light. I used to do it on my fox body but dunno if the 94 has the same capabilities.
  14. ram360

    Auto Stalls when put into Drive or Reverse

    I got the car to idle w/o the iac plugged in when it's cool. Car has no A/C. Even when I put on an electrical load the rpms do not increase or change at all for that matter. My cold Idle still does not vary from my hot idle. I put on a new Borg warner IAC but still not working. I have a...
  15. ram360

    Auto Stalls when put into Drive or Reverse

    the car has an SCT 5 way chip. The guy that dyno tuned the car was not that proficient w/ obd 1 cars. So you think it's more of a dyno tune issue??? Basically when the car is cold in the morning i need to feather the gas for about a min then it idles fine....if I don't it stalls. I cannot get...
  16. ram360

    Auto Stalls when put into Drive or Reverse

    I tried backing out the bleeder screw and it still stalls ( I have an aftermarket tb so mine was a slotted screw and not an allen head. Bought a new IAC but haven't installed it since once I break the seal on the bag I can't return it so I def want to make sure it's the problem. You...
  17. ram360

    Auto Stalls when put into Drive or Reverse

    thanks guys will see if I can't get this sorted out.
  18. ram360

    Auto Stalls when put into Drive or Reverse

    hey, thanks hissin....yes the trans is a wide ratio. Prob going to sound stupid here but what is a bleed screw? Is that somewhere on the iac itself? These SN cars are new territory for me. thanks
  19. ram360

    Auto Stalls when put into Drive or Reverse

    Trying to figure this out as it has become very annoying. Trans is a 4r70w 94gt. Car idles fine put when I go to put it in D or R the car usually stalls. I usually have to give the car gas an almost drive it like a stick car just to get it moving w/o stalling it out. Tried cleaning the IAC w/...
  20. ram360

    Car dies when shifted into reverse after cranking when motor is at operating temp

    subscribing
Top Bottom
Back
Forums
Menu