Search results

  1. S

    AOD Help needed

    Thanks for the clarification Wade I got it now. I feel like an idiot now Thanks for the help much appreciated
  2. S

    AOD Help needed

    I had everything laid out to shim and add spacers for the TV valve assy Turns out someone in my house decided to move the valve assy by mistake Here is a pic does this look right? I was told by baumann for the best adjustment they have seen is (2) 0.55 spacers and one 0,032" shim. Where do...
  3. S

    AOD Baumann kit

    Thanks for the info.. still lost VB will be coming out tomorrow after work
  4. S

    Spark Plug recommendations

    nothing but good look with OEM ford and autolites
  5. S

    muffler ideas

    I have shorties, OR H-Pipe with magnaflow cat back. quiet at idle, growls in the upper RPM range to quiet for me, thinking about switching to flowmasters
  6. S

    windshield wiper issue

    Thanks Saleen, i will look into that
  7. S

    windshield wiper issue

    I have a weird problem with my windshield wipers.. they will only work on HIGH and they will stop maybe every few minutes for 3-4 seconds then start again. Could it be the motor itself, relay or wiper assy on the column Cheers
  8. S

    AOD Baumann kit

    Thanks for the pics Wade :) so I take it, the spare VB I bought is for 89 and up ? and can't be used in my Transmission So I now have to mod the VB that is currently in my car now ?? DAMN
  9. S

    AOD Baumann kit

    my car is an 88.. but I got a used VB from a tranny shop so i can leave my stock one alone but i need the clip and the check ball so i will have to use the ones out of that. So |I don't know what year the used VB is anyway to tell? sounds like I am going to have some issues since I have no idea...
  10. S

    AOD Baumann kit

    anyone?
  11. S

    AOD Baumann kit

    well today is not a good day, awful day at work so i thought would relax and try doing the baumann mod a couple of questions 1. On the 1-2 shift accumulator the retaining clip broke while being removed (very lighty) what do I do here? 2. The check ball was either in the (check ball...
  12. S

    Misfiring???

    check to see what codes you have would be a good place to start
  13. S

    Fuel filler neck gromet replacement

    this is the most common thing for leaking gas tanks right? I am pretty sure mine has a slow leak from somewhere on top of the tank on the filler side
  14. S

    Just bought an 88 GT - need HELP Please!

    I agree fuel pumps should not be loud at all so I am guessing fuel pump and replace the fuel filter. But in all honesty I say replace the fuel filter first inexpensive and easy to replace.
  15. S

    I just got my Baumann recal kit

    Hi guys I just got my Baumann Valve Body Recalibration Kit and the Pressure Regulator Boost Valve Kit. I am hoping to do the install sometime this weekend. Any tips for the install? Has anyone found different setup tweaks that are better than what Baumann has in there instructions? I was...
  16. S

    Something strange after 3G install

    I added a 4g ground from battery neg to the ground on the rad saddle. Is this good enough?
  17. S

    Best Headlight Bulbs

    big difference over stock bulbs?
  18. S

    Need help quick!

    are you sure the wires are ok?? I had similar problem few yrs ago. Fill up a spray bottle with water and mist all the plug wires (at night better) see if you see any arching. When I had problems with my car I checked all the wires and found a slight arching on #3 and that was enough to drive me nuts
  19. S

    Interior light

    Any idea's what the bulb # is for the little mag light looking light
  20. S

    Something strange after 3G install

    I did my 3G upgrade last weekend, And after driving the car all week I feel as if the car runs alot better now. Did anyone notice the same thing or is it just me haha
Top Bottom
Back
Forums
Menu