Search results

  1. T

    Will an 01-04 dash fit in SN95? Also vinyl dye question.

    Will an 01-04 dash direct-fit into a 95 GT? I would like to go this route if I can find one cheap enough. Otherwise, I will be dyeing my current dash black. Regarding vinyl dyes, how well does this stuff stick to the vinyl? I realize there are various brands, but just in general the good...
  2. T

    Anyone put HID kit in these projectors?

    I know that HID bulbs in halogen housings will produce vastly scattered and blinding light due to the reflector and/or diffusion pattern on lens not made for HIDs. This would reduce the focused light output. However, to my knowledge most projector housings and lenses don't have any reflectors...
  3. T

    Tration lok from 2007 GT or FMS M-4204-F318C?

    Does anyone know what the anti lock exciter ring is? Is that the sprocket on the axle end that needs to be re-pressed on the new axles?
  4. T

    Tration lok from 2007 GT or FMS M-4204-F318C?

    Middle GA, Macon/Warner Robins
  5. T

    Tration lok from 2007 GT or FMS M-4204-F318C?

    Thanks all. I went ahead and forked out for the new FMS unit. Trying to restore my sad ole '95 GT with the freshest stuff I can. Now I just need to find a good shop to put all this stuff in.
  6. T

    Superior EV83 Axles - Opinions?

    Doing a 31-spline rear end upgrade and came across the EV83s. Anyone here run these and have inputs? There's not much info I can find one them other than they come with outer axle bearing and seals. I'm wanting to know if they are directly compatible with c-clips and ABS sprockets. A few...
  7. T

    Anyone put HID kit in these projectors?

    These have the simple aiming screws that the stockers have. With HIDs in these prjectors, I'm thinking that won't matter too much though. That's what I'm trying to find out is if these projector lenses will focus or scatter the light too much. Cause then no amount of aiming will help.
  8. T

    Anyone put HID kit in these projectors?

    http://cgi.ebay.com/ebaymotors/94-95-96-97-1998-FORD-MUSTANG-COBRA-PROJECTOR-HEADLIGHT_W0QQitemZ350176726233QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item518828ccd9 If anyone has put HID Xenons in these projectors, what were your results? Is the beam pattern ok? Does...
  9. T

    120 bucks for these headlights?? damnnn there mine!

    I'm a fan of these: http://cgi.ebay.com/ebaymotors/94-95-96-97-1998-FORD-MUSTANG-COBRA-PROJECTOR-HEADLIGHT_W0QQitemZ350176726233QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item518828ccd9 They have glass housing (no yellowing or scratching). However, I've learned that they...
  10. T

    Tube inside stock fuel tank?

    Does anyone know what the metal tube is that's inside the stock fuel tank? It's just ahead of the in-tank pump and has an open end facing up.
  11. T

    Tration lok from 2007 GT or FMS M-4204-F318C?

    I'm on a budget for the 31-spline rear end build, so I came across a few sales on Ebay. One for a for a new FMS unit and the other w/ 6200mi removed from an 07 GT. Price difference is $80. FMS unit advertises carbon fiber clutch plates, but I don't know if the one from 07 GT has that as well...
  12. T

    for anyone that has replaced a convertible top..

    I bought both rear glass, top section and headlliner and plan on doing the install myself using this tutorial: How to Change Convertible Top on Ford Mustang | eHow.com I read through it and it seems pretty detailed. I will start doing more research as I'm waiting for the outside...
  13. T

    Is my FMS M-4602-G Driveshaft Authentic?

    Looks like that's it. Thanks for the info Chythar!
  14. T

    Is my FMS M-4602-G Driveshaft Authentic?

    Bought this from a reputable company. It came in a genuine FMS box, but the production sticker on the driveshaft reads "Neapco Drivelines" and a p/n of CM 4602-G. I did some googling on that info and couldn't come up with anything other than Neapco is an aftermarket supplier of driveline...
  15. T

    First time starting the car in 4 years. What am I forgetting?

    Good thread -- I'm going to be in the same boat when I return in 2mos. Zero, can you explain what adapter to get for the drill and where to attach. I'm assuming it's to the balancer. I plant to drop the tank to drain as well. Anything else that should be done to the tank/pump while it's out?
  16. T

    Window Regulator?

    Or like mini terradactyls
  17. T

    Summit aluminum radiator for $220 less..Suggestions to install stock fan?

    What would be the impact of it not having a drain valve? The old coolant in the radiator woul dmix with the new after a flush?
  18. T

    Replacing motor in 95 GT - Need Advice

    Thanks for the reply jromeo. I'm pretty much set on the PRO Street 331 from CHP and I have asked them about the valve springs. Next, can someone look at the specs of this motor and tell me what u/l intake, oil pump, etc would be good for this setup...
  19. T

    Replacing motor in 95 GT - Need Advice

    Gotcha. So it's looking more to me like the CHP PRO Street flat top @ 10.30:1. Joe 5.0, I checked out fordstrokers, but they don't advertise complete longblocks which is what I'm looking for. CHP longblocks seem to have good components as they give a complete breakdown of everything used...
  20. T

    Replacing motor in 95 GT - Need Advice

    I was thinking high compression as well. Also, I am trying to buy a budget, but well-made longblock and CHP's motors caught my attention at around $5K. CHP has their dome-top piston PRO Street 331 with 12.30:1 compression. The main thing i want to make sure of is that this engine with such...
Top Bottom
Back
Forums
Menu