Search results

  1. Mark8Denny

    Please Help!!!!97 Cobra sparkplug holes filled with oil???

    oil in the spark plug wells You need new valve cover gaskets. The spark plug wells have a rubber o ring to seperate them from the camshaft area under the valvecover.
  2. Mark8Denny

    281 to a 302 stroker

    stroker or not well I need a rebuild , my stock long block made 355 RWHP and 325 RWTQ till it snapped the rod mid beam. expected for 140,000 mile MK8 motor , but anyway I did the math to check the changes in the rod ratio. I also race other brands and my other engines with great torque bands...
  3. Mark8Denny

    281 to a 302 stroker

    stroker 4.6 Does it rev any differently ? The rod ratio drops down to a lesser desirable ratio. How about bobweight total , is it a lighter or heavier reciprocating mass ? I imagine the pistons have a shorter pin height and the rods are shorter also ? Also did it change the tune much ...
  4. Mark8Denny

    281 to a 302 stroker

    Jim, after your motor was blown you built the stroker motor right ? If everything stayed the same with the blower and accesories etc. About how much more torque can you estimate in your application ? I need a rebuild on a supercharged 4.6 and understand the slight change in the price of parts...
  5. Mark8Denny

    96 Cobra Long tubes ,Hooker vs BBK - Fit + Trans Removal ?

    I have a 96 Cobra , About to install a Vortech S trim , Is it true the Hooker headers allow for tranny removal without trouble ? I see an advantage w/ the 3" collector also BBK headers are another option , But if i have to remove them to change the clutch , I would say they are...
  6. Mark8Denny

    need a pair of 94-98 cobra side skirts

    Side skits from a 96 lazer red I have some on the car I want to sell , [email protected]
  7. Mark8Denny

    Long tube headers on 96 Cobra , Tranny removal?

    Hello all ! Is it true that the Hooker long tube headers are the only headers that allow for the tranny to be removed without removing/loosening the headers ? I have installed a set of Kooks on my Mark8 and that was quite involved (drop the k-member , etc.. ) . I know , another exhaust...
Top Bottom
Back
Forums
Menu