Search results

  1. LethalInjection

    Opinions on possible setup..

    Well the ole stang's getting some miles on her now and I guess I've put off redoing it long enough. It would've probably already been done if I hadn't bought a jacked up 2000 Superduty and then gas prices went up. I have reconsidered my previous carbed combo in favor of the higher gas mileage...
  2. LethalInjection

    Flat top piston ?'s....

    Ok cool.. Thanks.. I knew it had to be something.. For some reason I was under the impression that they were both flat tops with reliefs and it wasn't making much sense to me..
  3. LethalInjection

    Flat top piston ?'s....

    Yeah, I was asking how they got a 8.5:1 C\R and 10:1 C\R out of a flat top piston when the lower compression piston has a longer compression height.. Neither pistons have domes, so where'd the 1.5 point bump in compression come from.. Stroke, rod, and bore are all the same.. Compression height...
  4. LethalInjection

    Flat top piston ?'s....

    As far as piston design goes, what affects the compression ratio of flat top pistons.. I know valve relief volume is a factor, but what is the difference in say... The 8.5:1 and 10:1 trickflow pistons.. I noticed that they have the low comp pistons listed with a larger compression height.. I...
  5. LethalInjection

    Removing Smog Pump

    Don't know the size with stock pulleys right off hand, but you can get a piece of string and route it around like the belt is gonna go. Undo it, lay it on the ground, and measure it. You might wanna subtract .5 or so to take the tensioner into consideration.
  6. LethalInjection

    Does anyone know this?

    What will happen if you put an msd distributor with mechanical advance and hook it up to a 6AL box in a fuel injected car? Will this work right? I SHOULD know this.. I'm just not sure what effect it would have on the other functions controlled by the computer.. Fuel is metered by readings from...
  7. LethalInjection

    aode to t-5 swap

    I got the manual tranny computer when I swapped...
  8. LethalInjection

    Mac FLowpath muffler sound.....

    Can anyone tell me if there is any difference in sound between the 13"L X 9"W X 3.75"th and the 18"L X 12"W X 4.75"th Mac FLowpath mufflers... Both of these offer a 3" diameter inlet/outlet, and I am looking for the best sounding ones... Since I will be upgrading to 3" mufflers for my future...
  9. LethalInjection

    RPM 2 Hood clearance?

    I know that the intake is a bit much for those heads, but I plan on using 165's on this shortblock until it blows.. Then I am putting 205's, a Procharger F1, and a different cam in\on a 331... And I want to already have the intake... It may not be optimum for now, but it will serve a purpose in...
  10. LethalInjection

    RPM 2 Hood clearance?

    I'm going to be using AFR heads.. I was just wondering if the intake would fit under the hood... Thank you..
  11. LethalInjection

    RPM 2 Hood clearance?

    Hey, does anyone know if the Performer RPM 2 will fit under a 96-98 cobra hood? I think I have just about decided to go ahead and get one of these, but as of right now don't want to put on the 5.5" extended cowl that I have.. I thought that the cobra hoods have a little bit more clearance for...
  12. LethalInjection

    BBK intake manifold?

    Wow, was that on a stock headed 5.0? I think I am eventually going with a 331 with some afr 205's and a pretty healthy procharger... I wonder how that intake will do in a forced induction environment? That is on down the road though, and I imagine that I will drive it N/A for the rest of the...
  13. LethalInjection

    BBK intake manifold?

    Ok, I haven't really had that much time to mess with my car here lately, but I got the Bother's Performance catalog a month or so ago, and I noticed that BBK is now making an intake manifold... For the most part these guys seem to make some good stuff, and and I kinda like the idea of the...
View older results
Top Bottom
Back
Forums
Menu