Search results

  1. J

    Convertible door panels in coupe

    Quick question... Can I use the door panels from a convertible into a coupe? Both cars are 91 Reason I am asking is that the vert doors a not exactly the same as the coupe.
  2. J

    T5 hitting the floor... Mount too tall?

    I am in the proces of putting a 302/t5 in my 91 LX(ex 2.3 auto car) Anyway I put the motor from the donor car(91 GT vert) in it along with the K-member Saturday. When I pulled the trans from the donor car the trans mount was bad(rubber torn) so I threw it out(should have kept it) Anyway I...
  3. J

    BUYER BEWARE!!! Radiator at Autozone

    seems like they advertise it as 2 core now ??? AutoZone.com | Vehicle Selection | Year
  4. J

    Tail light lens install help

    Anybody ever tried to use windowbond for a permanent seal? (the black caulk windshield installers use)
  5. J

    Can hydroboost be used on a 5.0 engine?

    You used a 4.6 PS pump on a 5.0 motor ????????????
  6. J

    Options for aftermarket side mirrors

    I searched all over the web and I cant believe no one make afermaket mirrors for the fox.
  7. J

    Trick Flow Kit on 80,000 mi stock s/b

    Can the short block take out the heads if it grenades ? Is it common ?
  8. J

    Lincoln 430 info anyone ?

    This thread is full of cross info and missinformation.
  9. J

    Pinto pics anyone?

    Damn !
  10. J

    Pinto pics anyone?

    ANybody got pics of pintos ?
  11. J

    Lincoln 430 info anyone ?

    edit:doublepost
  12. J

    Lincoln 430 info anyone ?

    How can the 302 be too small for that 4300lbs car but can make a 6000lbs f150 with a lift and 33in tires run just fine? I'm not building a race car I just want a nice fuel injected powerplant in the car that gets better than 10mpg. So will someone just tell me what I wanna know? DO THE...
  13. J

    Lincoln 430 info anyone ?

    Does the 302 have the same bolt pattern as the 430 at the bellhousing ? Whatever I want to intall in there has to be fuel injected. If that means an lsx motor then so be it.
  14. J

    Lincoln 430 info anyone ?

    I wanted to instal a fuel injected 302 for better miles per gallon. This is just a cruiser. A ford explorer weights 5000lbs and the 302 does a good job at pulling it. The ontinental weight 43oo lbs Is the 302 an MEL motor ?
  15. J

    Lincoln 430 info anyone ?

    I know you can put any motor in any car. I have a 1970 chevelle with a ls1 motor in it. What I want to know is if they are from the same family. DO THEY SHARE THE SAME BOLT PATTER FOR THE TRANNY, DO THEY SHARE SIMILAR MOUNTS...
  16. J

    Lincoln 430 info anyone ?

    Anybody on here knows a little bit about the motors that came in lincoln of the '60's. A 430ci V8. I'm wondering if it is possible to install a 5.0 in a car that originaly came with a 430. Are they from the family of engines ?
  17. J

    axle width on 94-95 mustang GT ?

    Can someone give me the width of the axle on a 94-95(I assume 96-98 is the same) I need the width WMS to WMS(wheel mounting surface) Thank you !
  18. J

    This is important, You have less than 3 weeks

    Does this apply to the 32v motors ?
  19. J

    3v 5.4 question for BillFisher

    Roush is coming out with it in a couple of months.. Problem is it'll cost $6k and I will still have to rig my all the fuel managemtn from the L onto the roush untit. I believe the method of making the L manifold fit on the 3v will be less painful than rigging all the L components onto the KB...
  20. J

    3v 5.4 question for BillFisher

    Ok thanks.. I wasnt sure if they all had it. I needed to know becasue without them, it's not possible to bolt a custom lowe SC pulley. My stock motor is doing fine but I'd rather have a built 3v :D
Top Bottom
Back
Forums
Menu