Search results

  1. Daniel50

    did a break my input shaft?

    so i get a bad vibration in the car at 4k rpm's to redline. you can really feel it hard through the shifter. the motor mounts and tranny mount were just changed after i felt this vibration. so that wasnt it. it does this in neutal and with the clutch in so i know its not the driveshaft. the...
  2. Daniel50

    power steering help

    weird thing is power steering worked perfectly fine until we took the pump off and did the h/c/i install. swap took a couple weeks. and then put it back together with a new pump and doesnt work. changed the pump and still doesnt. i dont think its the rack for this reason.
  3. Daniel50

    power steering help

    after we finished the h/c/i install on my mustang the power steering hasnt worked. we tried 2 different pumps now and still has the same problem. the power steering will work if you rev the car and turn the wheel but not if your sitting still. and when you turn hard it will jerk from time to...
  4. Daniel50

    help with install on 76mm c&l kit

    I have a set of 24lb fms injectors, the c&l intake pipe, 76mm mass air meter, and k&n 9in air filter. this is going on my 94gt with the mods in my signature. what should i set the fuel pressure at now? will the car run like crap? still untuned for a few more weeks
  5. Daniel50

    how to make money on the side

    im looking for a way to bring in an extra income. not much just like 500 bucks a month. ok the following idea cannot happen. -Selling drugs -Stealing Money -Car part installs (nowhere to do these) -2nd job unless i can work when i have spare time. (my job doesnt have a set schedule it...
  6. Daniel50

    ordered new parts!

    I ordered the c&l kit that comes with the power pipe and 76mm mass air and 9in k&n filter. and a set of 24lb injectors. at my point with my b303 cam, gt-40p worked heads, trickflow street intake, longtubes/o/r x pipe/ slp catback, 75mm throttle body, 1.7 rockers, and underdrive pulleys will...
  7. Daniel50

    cam help

    i ask this question a few times but never get a response so ill try again. I have a stock block with a b303 cam, gt-40p heads, 1.7 rockers, and a trickflow street heat intake. mac longtubes, o/r x, and slp catback. is it worth it to retard my cam 4 degrees? i heard the b303 cam is built in 5...
  8. Daniel50

    Broken Intake Bolt

    same exact thing happened to me and same bolt. i ended up getting new heads haha
  9. Daniel50

    cam advice!

    i dont think the cam is holding me back any maybe a few horses and i love the sound. just want to get the most out of my combo
  10. Daniel50

    ? about emissions legal heads

    you can get those tapped in for not much at a machine shop
  11. Daniel50

    Anybody running 1 chamber flows with pipes?

    i ran them on my fox and i hated them. they sound like your running no mufflers at all
  12. Daniel50

    cam advice!

    with the mods in my signature i was told that with the gt-40p heads and that if i retard my cam 2 degrees i would not only see a power increase but all around better sound and driveablity. is this true?>
  13. Daniel50

    went to the track!

    yeah didnt feel like spending 600 on a custom tune to get pretty much the same results. and i dont care about horsepower i care about 1/4 mile
  14. Daniel50

    maf upgrade?

    with the mods in my signature would a bigger maf and injecotors give me a few more pony's? i want to trap 106mph i know i wont feel the difference its just a mind thing i guess. i trap 105.5 right now. i just need that little extra and was wondering if this would give it to me
  15. Daniel50

    maf upgrade?

    with the mods in my signature would a bigger maf and injecotors give me a few more pony's? i want to trap 106mph i know i wont feel the difference its just a mind thing i guess. i trap 105.5 right now. i just need that little extra and was wondering if this would give it to me
  16. Daniel50

    94-95 cobras 1/4 mile times

    did you say fuell pressure at 50psi?! mine is at 35psi lol
  17. Daniel50

    94 gt with trick flow intake ?'s

    i had no problems with my street heat and my egr....
  18. Daniel50

    went to the track!

    played around with my fuel pressure regulator and done on kuhmo street tires fuel pressure at 35psi 60ft 2.112 1/8- 8.76 mph-83.2 1/[email protected] fuel pressure at 33psi 60ft. 2.02 1/8- 8.96 mph-80.2 1/[email protected] fuel pressure at 37psi 60ft-2.132 1/8- 8.85 mph-82.7...
  19. Daniel50

    bbk fuel pressure regulator

    which gauge works well with this regulator. is there a way to get it to face straight up instead of sideways?
  20. Daniel50

    throttle body and maf upgrade?

    so what would be pritority tb or maf and inj?
Top Bottom
Back
Forums
Menu