Search results

  1. bit

    Car has no power after 3g install

    I just finished installing a 3G alternator and a new electric fan. The 3G is wired to the hot side of the starter solenoid with a 4 gauge with a 150 AMP fuse in line. A matching 4-gauge ground cable is run from the block to a ground location behind the battery. The new fan is wired through a...
  2. bit

    Hot Wire for E Fan

    Where have you guys hooked up your electric fans? I am looking under the hood and all the wires I see are small 14 & 16 gauge wire. I am looking for a 10 or 12 gauge wire to tap. Thanks Brent
  3. bit

    Cobra ID VIN

    What letter in the VIN will idintify a 99 Cobra? I am looking at a car that I know has been rebuilt. The car has all the cobra parts but something seems fishy. I am looking for a quick way to check. Thanks Brent
  4. bit

    3G Conversion Tech Articles

    I have done some reading about changing my car over to the 3G alternator, but I still have a few questions. Mainly about changing the main charging wire. Can someone point me to a few good (complete) tech articles? Thanks Brent
  5. bit

    Best California Emissions legal CAM for

    Take a look at the Steeda #18 & #19 cams. The #19 makes great power with little overlap. I would think that it would be legal. The #18 is the same cam with different timing. i.e. more overlap. It would make more torque in your combo but I am not sure if it is legal. good luck Brent
  6. bit

    Master Cylinder questions

    Do I even need the 95 GT master cylinder? I think I have seen it done with out it. Like I said I am trying to do this cheap so if I can buy $10 in fittings instead of a $35 kit that would be great.
  7. bit

    Master Cylinder questions

    I am currently putting 95 GT brakes on my 91. Do I have to use the 95 GT master cylinder? What is the advantage? Can I use a 95 GT proportioning valve or do I need an adjustable valve? If I have to use a 95 GT master cylinder what fittings do I need for the 3 to 2 conversion? I am trying to...
  8. bit

    Supercharged Vortech guys with electric fan, show me what you're using

    I just came back to post that. It is the controller not the fan. Anyone know a online junkyard that may have one? Ebay has nothing right now. Brent
  9. bit

    Summit Sport Seats - Who has them?

    If you don't mind me asking, how big are you? I am 6'4" tall 195lb with a 34" waist. I am worried that the seats might be to narrow. How do they fit you? thanks Brent
  10. bit

    Supercharged Vortech guys with electric fan, show me what you're using

    FWI for all the people considering the Volvo fan. The fan came stock on the 99 and up V70, S60, S80, & S70. HOWEVER the 99-01 cars were recalled because the fan can over heat and melt, and on rare occasion catch fire. Brent
  11. bit

    Summit Sport Seats - Who has them?

    Do you like them? Are they worth the money? Any pictures? Thanks Brent
  12. bit

    SN95 5 lug conversion? - Brake lines

    I have read where people are using the stock fox brake lines when doing the conversion. I can not make the lines work on mine? I have made it work on the drivers side.(the side with the big fitting), but I cannot make the stock lines or the sn95 lines work. What’s up with the lines? Thanks for...
  13. bit

    ? for 99 Cobra Owners and others with an opinion

    How do you like the cars? What kind of numbers are the cars running stock? I remember when the car first came out the 260hp GTs were out running them. Did the recall fix all the problems? Are they good car out of the box or did Ford mess up? Also what gas mileage are you guys getting? I...
  14. bit

    What to look for when buying a Cobra

    I am looking for specific things if there are any. For example on a 5.0 you look at the air silencer, fan, torque boxes, seat supports, ECT. These are easily seen signs of abuse. Is there anything like this for a 96-98 Cobra? Brent
  15. bit

    What to look for when buying a Cobra

    What are all the things to check for when you are looking at a 96 Cobra? Ways to tell the car has been driven hard or beaten on. thanks Brent
  16. bit

    Hub Torque Spec

    Does anyone know the torque spec for the big nut in the hub? Thanks Brent
  17. bit

    Help me pick a cam!

    DP
  18. bit

    Help me pick a cam!

    You might consider the Steeda #18 cam. It is a nice street cam that makes great power with GT-40 heads. You can find the specs on Steeda's site. -Brent
  19. bit

    E-Cam Specs - Cam Card

    I have the basic specs you can get off Ford's site, but I am looking for all the cam cards specs. Valve timing, spring pressure ECT Thanks for any help -Brent
  20. bit

    Everyone with 275mm tires

    Do you have to have spacers to fit the 275s? What backspacing do your wheels have cjman15? I would like to avoid spacers if I can.
Top Bottom
Back
Forums
Menu