Search results

  1. J

    Neutral, 28oz, 50oz balanced??

    I understand what you are saying with the snout strength. As boost increases does snout stress increase too? If I were to run just 6 pounds would you say reconsider the blower idea? I didn't get a forged crank because of the limitations already on the stock block.
  2. J

    Neutral, 28oz, 50oz balanced??

    I am building a 331 with a stock block, cast crank and forged pistons/rods. Cast steel cranks are good to around 500 hp. Anything more I would go with the forged crank good to 1000 hp. The entire Eagle kit is under $2,000 crank, rods pistons, and if you are going to use a dart block not the...
  3. J

    tech question about BBK catalytic H pipe.

    I just put a catted BBK H pipe on my 94 cobra and the air tube did not match up with the tube from the smog pump that goes to it. I had to cut the air tube from h pipe and weld it back on at the angle which it would fit. Kind of a pain without a lift. Having a welder is also very convenient...
  4. J

    V-1 or V-2 on 331??

    SQ trim it is. I am pushing my project off and saving for a vortech sq. Need boost!
  5. J

    V-1 or V-2 on 331??

    http://www.twisted5o.com/media/351_024.mpg http://video.search.yahoo.com/video/play?rurl=www.svtsnake.com&oid=316e5e9e36efa9dc& I was doing a search and found this stang with a s-trim and the next with a sq-trim. When my buddy took me for a ride in his car with a sq-trim i could hear the...
  6. J

    V-1 or V-2 on 331??

    Yeah I've been doing to research on the novi 1000 too but I do drive my car to work so the noisy blower probably is not the way to go. The reason why I like it is because it is a little cheaper than the v-2 and novi 2000 but if I get sick of the whistle than its not worth spending less. I will...
  7. J

    V-1 or V-2 on 331??

    A buddy of mine is putting out 475rwhp on a stock block and hasn't split anything yet. He is using stock internals except for forged pistons, edelbrock heads, upper and lower intakes and a v-2 with 13lbs boost. Even if I don't hit the 400 rwhp mark with what I am thinking about doing it won't...
  8. J

    V-1 or V-2 on 331??

    I am currently building a 331 stroker for my 94 cobra and I am looking for some thoughts about putting a sq or sc vortech with about 6 lbs boost on it. I have a stock block with an eagle cast steel crank, forged rods and forged pistons. I need to utilize a head with a larger chamber to get my...
  9. J

    STROKE IT OR NOT????

    Not sure about the power output but I am currently building a 331 for my cobra. I would like to utilize as much off my car as possible but I would like 300-350 rwhp. I plan on getting windsor sr heads, port matching cobra lower to heads, Using my Cobra upper intake. I have an brand new e...
  10. J

    What would you do H/C/I or Vortech.

    I'm kinda in the same predicament with my engine choices. I am building a 331 for my cobra and contemplating on whether I should go SC. I agree with what was said that a superchargers potential is not optimized on stock heads/intake. I would start with a solid shortblock, good flowing heads...
  11. J

    01-04 console into 94 cobra

    Is an automatic console the same as a manual? I know the plastic pieces are the shifters are different but the console is the same right? Nice looking tan one on ebay but its an automatic so was wondering if it will fit. Thanks
  12. J

    94-95 bellhousings

    all depends on what he wants to do
  13. J

    94-95 bellhousings

    check out ebay. I see 5.0 bellhousings a lot on there. http://cgi.ebay.com/ebaymotors/T-5-BELLHOUSING-FORD-MUSTANG-94-95-5-0-V-8-5-SPEED-NICE_W0QQcmdZViewItemQQcategoryZ33733QQihZ001QQitemZ110004082414QQrdZ1QQsspagenameZWD1V
  14. J

    01-04 console into 94 cobra

    Thanks for the pic punisher. I'm going to look into that console. I really wouldn't mind the gap because it won't be seen. No one sits in my back seat. The person who owned the car before me drilled a big whole in the console for some reason and a couple of the mounting tabs are broken.
  15. J

    01-04 console into 94 cobra

    Thanks 4 the info.
  16. J

    01-04 console into 94 cobra

    Any know if a console from a 2001-2004 mustang is a direct replacement for a 94 console. I like these console better as they have cup holders in place of the ashtray. Any info about this swap? Thanks!
  17. J

    (pics inside)Found 2 cracks on my block, will these affect anything?

    I would get a different block with out any damage to it for any new motor. Someone could fix that crack but like said it is a weak point. Look in a boneyard for a 302 roller there are a lot of them or you could splurge and get a new block, but I personally like a seasoned block cleaned and...
  18. J

    Body work progress...PICS!

    If the DA is used to sand parts of the car evenly without keeping the sander in one area for too long there shouldn't be too many problems when it comes time to lay some paint down and it being uneven. You could always DA the car first to get clear/paint off fast and then block it to get...
  19. J

    Any muffler suggestions?

    I have only heard one muffler that sound better than flowmasters on a mustang. Too bad I do not know what they were.
  20. J

    .030 milled from a GT40Y head OK?

    combustion chambers get smaller. CR goes up!
Top Bottom
Back
Forums
Menu