Search results

  1. 5

    carb and cam advise for 351w

    yeah i was thinking a 750, as far as timing goes i have a full msd ignition on it. i run a 6a with a blaster coil and an msd dist w/ mech advance and 9mm wires timing set at 18* on a side note while my engine is out i was thinkin of going with a 393 stroker crank. what stroke is this crank...
  2. 5

    carb and cam advise for 351w

    i have the stock 71 heads ported and polished. i was thinking the same thing about the cam but i am going to install some 185s or 205s and a 393 stroker crank in it this time before it goes back in the car. i really didnt rev the car much maybe to about 5k be cause i just put it back together...
  3. 5

    quick(hopefully) question on 351w

    its not too bad really, all fo your efi stuff will transfer but you will need to extend the line between the fuel rails behind the intake due to the 351 being a little wider. a few guys in here have done the swap and will help with what you need. good luck.
  4. 5

    carb and cam advise for 351w

    bump
  5. 5

    carb and cam advise for 351w

    hey guys its been about a year since my last post and i got a new toy. i just built a 351w bored to a 357 it has 10.5:1 forged pistons stock rods and crank 1.6 roller rockers the cam i chose is a crane solid lifter 597. lift at 112* lobe seperation and i cannot at thsi time recall the duration...
  6. 5

    t5 rebuild what to look for

    hey guys like the title says i am rebuilding my t5 and im just wondering what to keep an eye out for and if you found any procedures easier than others. thanks
  7. 5

    website for 351W swap?

    yah i could use a good site for the swap i am doing a 408 in my 87 coupe. need efi tech help.
  8. 5

    rubberized undercoating HELP

    bead blast it . yes it is a mess but put your car up on jackstands outside somewere and get about 300 lbs of palstic beads and go to town. i did my entire car in about 8 hours . 3oo lbs should cost you about $30 at any heavy equip. store. and you can buy a sandblaster for about $15 as long as...
  9. 5

    351W/408 stroker swap into an 87 GT. Everyone welcome, teach me!

    in the mean time i am going to lurn to type....and spell
  10. 5

    351W/408 stroker swap into an 87 GT. Everyone welcome, teach me!

    well fi you dont use all this onfo i am definately going to but i plan on doing the 392 with the 351 block and the 302 pistons. what do you guys think ( go on beat the dead horse) thanks.
  11. 5

    Wheelie

    hey red 00 ss , nice numbers man. ont he car and the truck. those deisels are bad ass. i wsh icould shove a 6.0 in my 87 coupe. talk about gettin the tires up ...hahahahaha.
  12. 5

    carbed 408 stroker or efi ?

    oh yah ? i did not know that. guess thats why i asked. thanks for the reply. keep em coming guys. i need help. the rice around here is growing and i need to weed out the competition
  13. 5

    carbed 408 stroker or efi ?

    i decided to got with a 408 in my 87 coupe with the tremec 3550 should i go carbed or can i use my efi and computer. mas air injectors and fuel system will be used to accomodate but still cannot decide which route to go. this will be a weekend street cruiser and strip car.
  14. 5

    Please help me with my overheating problem

    i had the same problem with my 88 vert and i just removed the thermostat. now it sits about half way on the gauge. its an easy fix til i can get a new radiator.
  15. 5

    Changing Ball Joints and Bushings in Front Arms?

    dont forget..... when reinstalling them do not tighten the a arm blts all the way until the car is sitting back on the ground or you put a jack under the a arm or the new bushings will bind and wear out in a hurry.
  16. 5

    MSD or CRANE ignition????

    thanks man. i kinda got my mind set on the msd as well but i like to hear everyones opinion just in case. i appreciate the imput.
  17. 5

    MSD or CRANE ignition????

    hey guys what does everyone prefer and why? i know the diffrence in price is minimal so that does not matter. i plan on ignition module, coil and distributer also wires. i will be running a 331 with a powerdyne and a 9lb pulley and possibly 35 to 50 shot to cool the intake charge cuz i most...
  18. 5

    a arm bushing removal????

    come on guys, a little help please.
  19. 5

    a arm bushing removal????

    how do i get the a arm bushings out of my 87 notchback. and how do the new ones og back in? please help.
  20. 5

    What is the paint code for sonic blue?

    whats up with closing the thread. that was bogus. so does anyone have the paintcode if not i guess i will have to call the dealer. so i see you all like por as much as i do. sorry i dont have any. maybe i can get some pics of my grandma in the shower for you guys.LOL :shrug:
Top Bottom
Back
Forums
Menu