Search results

  1. gcwh02

    Convertible top not working!

    My top is currently in the down position and won't go back up. This is the info I have gathered: -Fuse is good and I have power to the switch (only one wire going to the switch has power) -In the back relays in my trunk, I only have power in the black/yellow wires (but it looks like they are...
  2. gcwh02

    Need help deciding what computers will work w/ my car

    Im thinking I fried my computer so I would like to know what computers would work for my car. It's an 89 vert with mass air. Thank you
  3. gcwh02

    Car Wont Start

    I was wiring in my Autometer gauges and I screwed up. Long story short, I spliced a power wire to a ground wire by accident. I turned the key over but not on and it was smoking down that wire. Now my car won't start. I don't hear my fuel pump prime and I checked the relay(which is good) and the...
  4. gcwh02

    Autometer Electric Speedo Help

    I need help determining what to wire to the back of the speedo and what to leave out. I know I need to use the VSS but not sure what wire that is. Specific help would great. Thank you
  5. gcwh02

    FUEL PUMP NOT WORKING

    My car is not starting b/c my fuel pump is not coming on. When I turn my key on my fuel pump does not prime. Does anyone know what I can troubleshoot.. Thanks guys
  6. gcwh02

    Car not starting

    I was taking out my tail lights and in order to do that I needed to unplug a plug that was in the way of a tail light bolt. That plug looked like it had a wire that ran to the fuel pump. Well, now my car is not starting and I can hear that my fuel pump is NOT priming when I turn the key on. Any...
  7. gcwh02

    I need brighter headlights

    I have smoked headlights and I am looking to see if anyone had any luck with better bulbs and what were they. Thanks
  8. gcwh02

    Where is fuel pump inertia switch??

    I just bought a tubular front bumper and when hammering out the bumper shocks from the frame to remember to reset fuel pump inertia switch after hammering out the shocks to the frame.
  9. gcwh02

    Spark plug gapping and size windsor jr head

    Anyone have the info on what autolite spark plug to use and what gap for a world products windsor jr. head??? thank you
  10. gcwh02

    weight reduction help

    im looking to unbolt a bunch of things and need some help/opinions. I hear about deleting brake booster, evap something? Are those things ok to delete? Also, which fender is the cruise control located at?
  11. gcwh02

    vert rear seat delete

    does anyone make a rear seat delete for the vert? or does anyone have any suggestions for a light-weight rear seat delete. I have a 6 point cage so the back seats are pretty pointless and im taking out the back seat belts. any suggestions?? thanks guys
  12. gcwh02

    Another Relocating Battery Help Thread

    ok, ive searched this a few times but I gotta get this straight. I have 20 ft of 0/1 gauge wire-- I use this wire as a ground from the battery to the quad shock and also to run my + power wire from the battery to the solenoid. Do I also need a 2gauge wire to run from the negative terminal to my...
  13. gcwh02

    5 pt seatbelts and track tech Q

    Is it ok just to bolt the seatbelts to the floor pan whereever you feel is comfortable? Does there have to be any welds? How about the part where you mount it to your roll cage behind the seat, is there any certian way you have to do this to pass tech? Any help would be appreciated
  14. gcwh02

    Electronic Speedo Q

    What all do I need to do to hook this up and how do I hook this up. I heard something about a VSS? and where is the VSS located? Thanks
  15. gcwh02

    Design Concepts Cobra Rear Bumper

    Anyone ever buy this from design concepts? I know cervinis is suppose to be the perfect fit but I'm just wondering because its well over 100 bucks cheaper.
  16. gcwh02

    Rear Control Arm Help

    I am putting on new uppers and lowers and I am having problems lining up the lower control arm bolt hole with the rear. Is there a technique to do this?? When I try and jack up the control arm(with the spring on it) with a jack on the bottom of the control arm, it just raises the rear away from...
  17. gcwh02

    what kind of hydraulic fluid 89 vert top?

    what kind of hydraulic fluid do i use for a 89 convertible top motor??
  18. gcwh02

    Aftermarket Speedometer

    Im looking to install a new speedo with my new cluster I am going to assemble. What is easier to install, mechanical or electrical?
  19. gcwh02

    Clearance w/ tall valve covers Q

    Trick flow track heat intake with 3/8 spacer, will tall ford racing valve covers fit under that?
  20. gcwh02

    Aluminum Gauge Cluster

    Who sells those aluminum gauge clusters that you can cut out your own gauges holes and make your own gauge cluster?
Top Bottom
Back
Forums
Menu