Search results

  1. Bugman.dave

    Custom Rear Seat Delete Kit

    The seat bottom unit comes out in one piece, by pushing in the connectors where the seat bottom meets the carpeting. Just push in and pull up at the same time. The back cushions can be unbolted as one unit as well by pulling the cushions down to gain access to bolts and screws that attach a...
  2. Bugman.dave

    Hood Skins

    That's the idea,.....anybody have any ideas where these might be available? I think they are a great idea,....lighter for sure, and you just lift them right off to work in the engine compartment. Perhaps not the greatest thing for an everyday driver, but for the weekend track car or show car I...
  3. Bugman.dave

    Hood Skins

    Just think of a hood but with no bottom half layer. When installed it looks like a regular hood, but it's held on with Dzus fasteners or pins. I've heard of them made of fibre glass or CF.
  4. Bugman.dave

    Hood Skins

    Has anyone ever installed a hood skin on a late model Mustang. They are usually held on with either Dzus fasteners or hood pins. The hood skin is usually one layer thick and used mainly for racing as it is very light. I have a 01 GT with a Cobra R hood. I understand a hood skin may be...
  5. Bugman.dave

    Battery relocation kit install questions (any pics)

    Nothing yet,...but I'm still looking. I'll do a search later.
  6. Bugman.dave

    Custom Rear Seat Delete Kit

    Yes, that's my favorite part also,...I had it fitted there first,...then realized that hey, I can use it for a template and maybe make the seat delete out of something else,...something stronger, lighter, faster,......so I tried aluminum and ya know it worked even better,.... Ha, thanks for...
  7. Bugman.dave

    Custom Rear Seat Delete Kit

    If I was to do it all again it would cost me less as I had made some mistakes and only through trial and error came to this completed look. The carpeting was done by an old hippie for $80 CDN,...the sheet aluminum would have been cheaper if I had done it right the first time also. You'd have...
  8. Bugman.dave

    Battery relocation kit install questions (any pics)

    I'd kind of like to know this also. I've heard you can connect all the cables to a central lug in the engine compartment, but I think you still have to run the alternator cable all the way back to your master switch in the trunk (if you're putting one in that is).
  9. Bugman.dave

    Custom Rear Seat Delete Kit

    My seat delete Hear is some shots of my rear seat delete,..it's made out of aluminum and the carpeting is held on with dome fasteners. The aluminum is removeable and held in place with Dzus fasteners,...
  10. Bugman.dave

    Steeda bumpster kit + x2 balljoints ?

    Thanks,...I didn't get the X2 balljoints. I did buy a new set of control arms, burn't the bushings out and replaced them with delrin's,....now that makes a difference,..as well as solid steering rack bushings and a flaming river steering shaft,......
  11. Bugman.dave

    Underdrive Pulley Install Unsuccessful?????

    I have to admit when I installed mine I went out and bought the biggest impact wrench I could find,...it worked. I use that wrench a lot now to loosen other large fasteners. I like you tried everything to get that big crankshaft bolt out!
  12. Bugman.dave

    Steeda bumpster kit + x2 balljoints ?

    I have the Steeda Bumpsteer kit installed on my 01 GT. My car is lowered and I've got among other things the MM cc plates also. I haven't had a chance to do much testing, but I'm sure they will help.
  13. Bugman.dave

    pictures of hoods

    I like the way you used the Dzus fasteners! I experienced those while installing the Cobra R splitter.
  14. Bugman.dave

    pictures of hoods

    Cobra R Hood,....
  15. Bugman.dave

    Steeda Alum LCA's vs. Pro3i LCA's

    The one nice thing the Pro3i have among other things is a brace under the spring perch,...not many others have this. I think they're great!
  16. Bugman.dave

    What is this? **SEE PIC**

    Ya, I can say pothole also,....I'm thinking about an aftermarket K member from MM,....
  17. Bugman.dave

    01 GT Rear Seat Delete

    Both pictures are of the same car. The top part of the backrest fits flush with the headrest, but with minor tweeking you can fit it any way you'd like. The aluminum can be obtained at just about any sheet metal sales location, the other parts such as dome fasteners can probably be located at...
  18. Bugman.dave

    cobra r wing question

    Ask away Badd GT
  19. Bugman.dave

    cobra r wing question

    Here's what the underside looks like,...
  20. Bugman.dave

    cobra r wing question

    It's probably a good thing it does not work as well as we'd like it to at the lower speeds. If it did wouldn't the front end get lighter without the Cobra R splitter? Either way I just like it!
Top Bottom
Back
Forums
Menu