Search results

  1. D

    Help identify this plug

    This plug runs along with the O2 sensor on the drivers' side. Did a ground up restore, now using LT headers, and failed to label this plug upon disassembly. see attached pics
  2. D

    Hood Pin recommendation

    Hood pins /w Springs OK... so I'm hijacking my own post. Why does is there no vendor which offers a hood-pin kit with springs ??? I could see that all stock latches and hood stops could be removed if the hood-pins were in the center of springs which held the hood in place. You could...
  3. D

    Hood Pin recommendation

    Which hood pin manufacturers should I stay away from ? WHo would you recommend ? Is it a good idea to remove the stock hood release -or- leave it in place ? TIA
  4. D

    Full MAC Exhaust with Cats ?

    Here is a pic: http://i598.photobucket.com/albums/tt67/DonMaximo/Mustang/Undercarriage/undercarriage.jpg
  5. D

    Anyone have a complete list of light bulb IDs ?

    Doing a ground up restore of a 1992 LX. I need a full list of bulb identifiers for the car. All the online internet sites seem more interested in pushing upgrades...making it difficult to find what I need. Any help would be greatly appreciated.
  6. D

    Full MAC Exhaust with Cats ?

    I've searched this site and could not find an answer to my question. I have a full MAC exhaust system which includes the following: 1-5/8" Ceramic coated Long tubes (2.5" Collector / manual tranny) Prochamber mid-pipes mufflers 3" chrome...
  7. D

    Seats into a Fox ?

    What years Mustang seats will fit into a 1992 Fox Body ? I need to buy seats for my fox and want to know what will fit. Even if some minor fabrication work is necessary on the seat. TIA
  8. D

    Where can I find ....

    I need to replace the rubber boot which covers the harness from the front door into the car. This boot covers the wires from the door which control electric window, locks, mirror, and speakers. Where can I find this part ? I've looked at Craig's, eBay, and a couple Mustang parts companies.
  9. D

    Need pics of dash without cover

    Doing a ground up restore and reached a point or reassembling interior, specifically the dash framing. Can't seem to locate the pics I had taken before disassembly. I'm looking of any and all pics people may have or know of, which show the dash "without the cover". I'm certain I can...
  10. D

    Where does the name "Fox Body" come from ?

    While it may seem like a dumb question... I don't know the answer. Do you ?
  11. D

    Elect. Power Distribution Help needed

    Here's my setup: 347 stroker Mack VIII electric fan w/ DC Controller (FK50P) PA Performance 240 3G Alternator ~1,000 watts of stereo amplifiers + remaining stock electrical functions... My question is related to getting all of this power hooked up and looking good, so we're talking...
  12. D

    Need a pair of eyes -- Simple help

    I'm rebuilding a not-so-stock engine back to together. There's a vacuum line which comes off the Charcoal cansiter and it leads to a purge valve, and then the purge valve has a vacuum line which goes to the engine. Can someone please tell me where this vacuum line hooks up to ??? I...
  13. D

    Spindles

    Yup !! I figured that out about 1-2 hours after my post. So I spent the day on Saturday pounding metal with hammers and dollys to push out a flare and it came out tremendously well...will require very thin film of filler at best. Thanks for the follow up
  14. D

    Spindles

    I have a 1992 with 94 spindles. I am however, using Stainless Steel brake system and needed a spacer for my Bullet wheels to clear the larger calipers. The problem I now have is that the wheel is pushed out beyond the fender. Rolling the inside lip will not solve the problem. I bought...
  15. D

    Upper Intake Torque Spec ?

    I have a GT40 Upper intake. Can't find the torque setting for the Upper intake in my shop manuall. Lower intake was rated @ 15lbs.
  16. D

    Smog Pump Function - COLD

    No... not all all... I think this thread got so long it's hard to follow. I need to keep the pump so the cats work correctly. If you look at the diagram above, there are many other parts between the pump and cats. Jrichkers astute suggestion was to plumb a line from after the Bypass...
  17. D

    Smog Pump Function - COLD

    I appreciate the answer, but I'm wondering if my setup can be simplified further. In short, what is to prevent me from simply flowing air from the pump directory to the cats ? And if this is acceptable, do I need to concern myself with the wiring from TAB/TAD sensors which return to...
  18. D

    Engine compartment harness routing ?

    Anyone have decent pics/diagrams of how to route the 2 large wire harnesses throughout the engine compartment ?? One harness comes from the passenger side, the other from the drivers's side. Prior to the strip down on this ground-up restore, I had a boatload of pics and brilliantly put...
  19. D

    Problem priming oil pump

    PROBLEM SOLVED... and it's quite simple. I used the priming tool that I last used after a 351C build. It's a 5/16" size....which also works on 351, 400, 429, and 460s. The tool I need is for a 302... which is 1/4"... and will also work on 390 & 428s. Live-n-learn. Just learned...
  20. D

    Problem priming oil pump

    I have this crate engine from T and L engines. Since it's Saturday, I can't reach them. As a crate engine, this engine must ship dry (no fluids at all). It has a larger than stock oil pan. I've had it almost a year and I'm just now filling with oil and wanted to prime the oil pump. I...
Top Bottom
Back
Forums
Menu