Search results

  1. M

    Knocking from Valve Covers

    Ill start off with saying i have an 01 GT Well ive gotten a loud knocking noise coming from the right side rear of my valve cover... Ive removed the valve cover and from what i can see the plate that goes over the cam is a scratched and dinged up on the bottom side!... What would cause...
  2. M

    What do you all think

    guys I need to replace my current motor and came accross this one..what do you all think?....What would you be willing to pay for this? it is a 2000 windsor block. with a 5.1 litre stroker kit in it all fully forged kellogg crank manley h beam rods mahle forged pistons comp cams 270 cams...
  3. M

    Roush center cap help

    lost a few center caps this season.. i ordered some new ones but i cant get them to fit in my damn rims?,,ive already broke 2.. what gives? 99+ rims
  4. M

    Roush 3rd brake light

    my 3rd brake light isint all working... thre middle area of the light is not lighting up... Are they all one bulb or is there a few seperate bulbs and maybe one is blown out?....If it just a buld does anyone know what bulb # i will need?
  5. M

    clutch/flywheel/tranny

    ok guys I dont know any of this so im askign for advice..lol I am installing a 01GT motor into my 2000gt....I know the 01 has a 6bolt flywheel and the 2000 has a 8 bolt... What size of clutch would i need? Can either the 10.5 or the 11" work?
  6. M

    Roush HP estimate

    ok guys I know I wont be hitting the big numbers but im hoping to do decent anyways...lol.. What should i expect? 2000 saleen -Series I blower 42's 90 MAF SVT Pump Chicane pulley MAC Long tubes O/R H Going to be using my Xcal 2 aswell..... just curious what #'s you gusy have had with that...
  7. M

    somehat unrelated....

    kind of a unrelated question..but has anyone purchased a 1.7KB kit recently?.Are they all instock and ready to be shipped or are they still on back oreder? How long is the shipping?
  8. M

    Roush engine and parts

    ill be taking my car into the shop in the next 2 weeks.... Ill be installing a new SOHC 4.6 65mm pulley 42lbs Long tubes 90 MAF SVT pump NGK TR6 Now what other lil odds and ends will i need? Intake gaskets? Any gaskets that are with the blower? header gaskets? Headre bolts? Oil...
  9. M

    removing engine

    Is there any online sites that shows step by step directions when removing and reinstallin a new motor on a 99+ gt?
  10. M

    parts for engine

    Im going to have a new shortblock put into my car in march..Im tryig to gather as many parts now as I can shead of time so what would I need? Itake gaskets? Coolant? What stuff like that will i need to do teh shortblock swap?
  11. M

    engine exchange

    Just curious if there is anything i will need to change or get before i do this swap? Im putting a 02gt motor into my 00gt...Does the clutch on my year work with the 02 motor?...is there any other parts i will need to do the swap?
  12. M

    engine rebuilding ideas and suggestions

    came accross this special and at the current time im looking to drop a new motor into my 2000 saleen seeing as i snapped a rod and spun a bearing... http://www.pmpparts.com/index.php?m...ee8cf1f9d69476a If I was to go this route.. would anything have to be done to this block by any machine...
  13. M

    OBDII code help

    okay pulled 3 codes today and was hoping you guys could tell me more detailed what the cause may be.. P0401 Insufficient EGR Flow P0455 Leak or Blockage Detected in Evaporative Emission Control System P1000 OBD-II Monitor Testing Incomplete
  14. M

    Roush Changing blower?????

    ok well im going to have to replace my motor on my 2000.. I can get a used motor with low miles.... its gonna cost me 400 for a R&R... how difficult is it gonna be to have to transfer all my blower parts to teh new motor?... is it gona be alot quicker with the engine out rather than having to...
  15. M

    Engine rebuild

    whats the rough cost on an engine rebuild It sounds like i blew a rod, bearings and need a new crank???
  16. M

    Bearings

    well it sounds as if im gonna have to put new bearings in my bottom end...Am i perfectly fine with keeping my crank or would that have to be replaced?
  17. M

    Ok..where do I start

    Ok. Im not sure what my best scenario would be but im also on a budget.... I know you get what ya pay for yadda yadda yadda...... But.. Im gonna have to look inot rebuilding my engine seeign as I blew it up... I have no Idea where to start..... what parts do you normally get to rebuild the...
  18. M

    Roush UH OH!! need help ASAP guys...

    okay guys the other day I had my car out and i decided to get on it while in 2nd gear... i brought it up to redline then shifted into 3rd but it never shifted....my rpm's just kept banging of rewdline for a steady 5 secs or so ..I didnt realize right away but my facking floor mat had pressed the...
  19. M

    engine knockin noise?

    okay guys the other day I had my car out and i decided to get on it while in 2nd gear... i brought it up to redline then shifted into 3rd but it never shifted....my rpm's just kept banging of rewdline for a steady 5 secs or so ..I didnt realize right away but my facking floor mat had pressed the...
  20. M

    Roush cluthc question

    does my 2000 s/c have a standard clutch liek any Gt would have? also what kind of tranny would I have??
Top Bottom
Back
Forums
Menu