Search results

  1. S

    installed 24lb injectors, mass air, and put upper intake back, now engine whistles?

    it does it while idling for me. i have a GT40 intake, and stock? throttlebody i think. i dont know how it will whistle if i hit the gas, ill have to try. i think a better spark will help my car. so i going to install my MSD box, coil, distributor, wires.. and see how it runs/sounds then...
  2. S

    Pros and Cons of coil-overs?

    im also interested.
  3. S

    installed 24lb injectors, mass air, and put upper intake back, now engine whistles?

    thought i did :shrug: the 2 smaller ones on the back of the intake. and the thicker one that runs to "S", and one on the EGR. but, i turned the PCV valve tube up so its near the top back of the engine. maybe it was the PCV valve whistling?
  4. S

    installed 24lb injectors, mass air, and put upper intake back, now engine whistles?

    now thats it running again, after the install. my engine whistles?! and runs crappy. it pops in my headers when starting, and. the tone is different. like its harder for the engine to fire. and doesnt rev as fast.. i havent reved it very high at all. not with it running like this. is this new...
  5. S

    Easiest 100HP i ever got!

    haha oops, i actually meant to post it in talk :| oh well. lock/delete/move it. which ever, i was just bored :D
  6. S

    Easiest 100HP i ever got!

    haha actually i do. i found another granatelli sticker after i took the picture. and a hifonics amp sticker. i know i have more flowmaster stickers, and some bbk ones. at least i did :shrug:
  7. S

    Easiest 100HP i ever got!

    omg! everybody must do this! after the mod i blew away a fast ass HONDA! ..next on the todo list, chinese letters
  8. S

    help me wire my autometer guages.

    ok my car came with two autometer sport comp guages, a oil pressure, and temp. the back of the temp guage has a white and black wire.. then the wire thats ran for the temp. the oil pressure just has a white wire. and the oil temp hookup.. both of the guages are hooked up. i just need to wire up...
  9. S

    H/I/C 5.0, 24lb Injectors.. stock Fuel Pressure Regulator, bad?

    my setup is in my signiture. i just got it running with the 24lb injectors in it, and the new pro-m mass air meter.. it didnt run perfect before. but now it runs 5x worse. popping in my xpipe worse idle. etc. would a aftermarket Fuel Pressure Regulator fix this? or should i just adjust my timing...
  10. S

    Whats the center intake hole for?

    i noticed when i changed my fuel injectors, and had my upper intake off.. thats theres the 8 Runners, and a smaller hole in the center? and my GT40 intake had a runner for it and it loops around to where the throttle body connects.... but, whoever owned it before me, put a 1"? spacer in...
  11. S

    Throttle Body&Upper Intake vaccum lines? which&where?

    ive been very careful on the wiring. whoever installed the alarm, did a messy damn job. so ive just been cleaning it up. and taking the alarm out. my problem *could* be just ****ty battery connection. im hoping it was. but theres 5 wires or so that come in a loom from the passenger side...
  12. S

    Throttle Body&Upper Intake vaccum lines? which&where?

    thank you i appreciate it. going out to look for me. i think i have the vacuum lines right from memory. i took the intake off again anyways :shrug: and im rewiring a bunch of stuff. it wont crank at all. but hopefully. monday i can finish rewiring and put my intake on (again) and it will run...
  13. S

    F%#@ Gurus Help Me Fix My Car!

    ok maybe that was a bad example. my line is hooked up just as it is in this picture (whoever's engine this is) but anyways? why is my igniton ****ing up?
  14. S

    F%#@ Gurus Help Me Fix My Car!

    well, it had the same problem before i ripped the alarm out. id try and turn it over, no go just a click. everything shuts off. and then a couple seconds later my alarm would start going off.. and my remote for it barely worked and stopped working at this time. so i said **** it im taking it...
  15. S

    F%#@ Gurus Help Me Fix My Car!

    i just installed 24lb injectors. and a pro-m mass air meter for 24lb injectors. i put the intake back on. pretty sure i got all the vacuum lines back in the right spots. 2 little ones on the intake rear and a larger one there. one for oil to the throttle body, and one to the EGR? or whatever...
  16. S

    Throttle Body&Upper Intake vaccum lines? which&where?

    TTT help me!
  17. S

    Throttle Body&Upper Intake vaccum lines? which&where?

    i think i mixed up my vacuum lines when i replaced my fuel injectors. or maybe missed a wiring harness? because my car wouldnt start. and my haynes manual doesnt seam to have any diagrams for vacuum lines, at least i cant find them. anyways, can somebody post pictures of which lines go...
  18. S

    WTF!? my car wont crank and my alarm goes off? HELP!

    and this could just happen suddenly to me? i took both the positive and negative wires off the battery for about 2 days. could that make my alarm system go haywire somehow? its a python something or other. i bought the car with the alarm in it. looks like a ****ty install too. theres...
  19. S

    WTF!? my car wont crank and my alarm goes off? HELP!

    over the past two days ive had my battery compeltely disconnected. i took off my upper intake and throttle body, and replaced my fuel injectors with new ford hiflo 24lb injectors. i put the fuel rails back. upper intake back. and i put in a brand new pro-m mass air meter for 24lb injectors. i...
  20. S

    does autometer make backlit guages?

    ahhh cool didnt know that, thanks :D
Top Bottom
Back
Forums
Menu