Search results

  1. Manewaymja2

    331 SBF with Procharger (F1R????)

    Got that OK will keep in mind
  2. Manewaymja2

    331 SBF with Procharger (F1R????)

    Only had 456 hp to the Crank. First #1 Bearing knock then Crack. Its crazy. Ah...... Can you explain better please. Thanks keep em coming........
  3. Manewaymja2

    331 SBF with Procharger (F1R????)

    $20,000......is for guys who cant do anything for themselves and the builder takes them for a good ride:lol: I have priced All parts and Labor for this as well and not close. $15,000 is in the ball park like 13,500.00 to be exact from a real good builder and it will surley be the one to last...
  4. Manewaymja2

    331 SBF with Procharger (F1R????)

    Hey guys just broke up my Stock 306 SBF and thinking on a 331 Dart Block based motor with a Procharger like F1R. Trying to get into the 800 - 900 RWHP area. What are you guys take on this? all ideas and advice would be greatly appreciated as im going to do this in short order. Just would like to...
  5. Manewaymja2

    SBF With 900 HP / Is this Possible / HOW

    What about the AFR Heads 202. And say a D1 or F1 Procharger. Think that will do the trick?:shrug:
  6. Manewaymja2

    show off your engine bay!

    1989 Mustang 306 SBF with P600 Supercharger (Bearing Knock) soon to be Race built 331 Dart Sportsman foundation
  7. Manewaymja2

    SBF With 900 HP / Is this Possible / HOW

    Hey huys i was wondering if there is any advice on how to get a SBF say 331 or 347 with a Procharger up to 900 Crank HP. Can This be Done :shrug: and if So would say a 331 Dart Sportsman block with dished pistons (-14.2cc) along with Performer RPM Heads, Procharger P600 up to 14psi, and a...
  8. Manewaymja2

    Blown 306 / Want a Real good Dart Short Block / Where In Florida

    Are there any in Florida?????????????????????:shrug::shrug:
  9. Manewaymja2

    Blown 306 / Want a Real good Dart Short Block / Where In Florida

    Hi there guys in need of a Dart Short Block built for Racing say 331 / 347. SBF 302 Based that will handle allot more Power as the Stock 306 is already knocking after 4 good runs on 8 PSI. Dont plan on rebuilding this Block. Need advice on where i can get a nicely built one from in say Florida...
  10. Manewaymja2

    ANYONE have any exp with Stage 2+ SPEC Clutch

    Im going to chime in here and as for SPEC Clutches they get my vote over most other Clutches. SPEC Stage 3 = Great holding Power, No Chatter after proberly Broken in (500 Miles with lots of Stop and go and differnt Heat Cycles, No High RPM take offs). They will make your Tire Bit like crazy. The...
  11. Manewaymja2

    don't know what k-member to buy!

    Hey there Mike like you mentioned I am buying a Kmember kit from you guys and wanted some advice on the Spring Rate,Struts and the Rear shocks. Firstly this is what i had in mind. 1-2005-79K / 79-93 Mustang Chrome Moly K Member Kit (With the Bumpsteer Kit & Caster Camber Plates)...
  12. Manewaymja2

    Advice on a Good Built Block (302/306/331/347)

    maybe you guys can help me with my other post,
  13. Manewaymja2

    Advice on a Good Built Block (302/306/331/347)

    Hey where are they located?????
  14. Manewaymja2

    Advice on a Good Built Block (302/306/331/347)

    Will be looking for a complete Short Block. Blanced ets. Thanks tannerc91gt, are there any others you recomend?
  15. Manewaymja2

    Cylinder Compression Pressure for a 1989 302 SBF?????????

    Hey Guys just like the Title, what should the compression pressure be for (Stock) 302 SBF. I want to have a Ball Park area when i do mine. Thanks Matt
  16. Manewaymja2

    Advice on a Good Built Block (302/306/331/347)

    Hey Guys, I already have a Thread on here asking about what cubic inch to go with on my Bottom end. Well I have deceided to buy a built Short Block for my Top End. The Run Down: Heads Performer 6037 Heads, Performer Intake, hardened pushrods, 1.6 Pedestal Mount Rockers. Now i want to spray...
  17. Manewaymja2

    Rebuild What Cubic Inch Should I go With?

    Cold Fusion Wet Kit. The Cam i have is a E cam and the Pedestal Scorpion Rockers are 1.6 roller rockers, Stock length Hardened pushrods, Edlebrock Performer heads. Like i said just trying not to exceed the Block HP Range when using the NOS. I think ill check the Compression ratio and...
  18. Manewaymja2

    No Hook at Launch. Need advice on Suspension Upgrades Please...

    No im not using Rim Screws. Didnt think that i would need the making only 400 RWHP/Torque. Can you shed some more light on this for me. Ill try the lower PSI until i see a wrinkle. Might Help. Thanks Matt
  19. Manewaymja2

    Rebuild What Cubic Inch Should I go With?

    As for the stroker Kit, im hoping I dont have to do more than just clean the cylinders, as i will have to ship the block to the US. If I have to so be it If Not then Clean up is the way im going. Pistons- If i reuse the Stock ones i think they were forged ( I will be using Forged if other...
  20. Manewaymja2

    No Hook at Launch. Need advice on Suspension Upgrades Please...

    Guys Ive decided to go with some 90/10 Lakewood shocks up front and QA1 Adjustables out back for Now with the Springs that i have Now and the adjustable upper control arms. A freind of mine told me the other day that i may be Launching abit to fast off the clutch. I Have noticed that all i do is...
Top Bottom
Back
Forums
Menu