Search results

  1. Manewaymja2

    Rebuild What Cubic Inch Should I go With?

    Hey guys im rebuilding my 1987 GT Mustang 302w and at first i was just going to do a Top end upgrade with RPM Heads, Hardened push Rods, Guide plates, RPM Intake, E Cam & 1.6 Scorpion Roller Rockers (Pedestal Mount). Well recently ive decided to just take the entire engine out and maybe do a...
  2. Manewaymja2

    No Hook at Launch. Need advice on Suspension Upgrades Please...

    From What Im hearing, I would say either: 1-The Shocks Lakewood 90/10-50/50 , the springs Drag Race Springs, the upper adjustable control arms and maybe a Torque arm would be the way to go. I already have Steeda Lower control arms. 2-Or Maybe the baseline uppers with the anti-roll bar and...
  3. Manewaymja2

    No Hook at Launch. Need advice on Suspension Upgrades Please...

    Ok after some more research and what you guys have told me i am looking at this set up. Up Front, Springs that i have Now (Asuming Stock) with 90/10 Struts. Out Back, Springs that i have with the Air Bags in them (going to Soften them up a bit Driver side more that Passenger) with 50/50...
  4. Manewaymja2

    No Hook at Launch. Need advice on Suspension Upgrades Please...

    What was the Spring Rate of the Moroso Springs - 175 / 200 / 250 ???? How about the 90/10's up front with the Moroso Springs, and say 50/50's out back with my Springs Now (Not Sure what they are, but i have noticed that they have an air bag in them) that i didnt know untill a bit of research...
  5. Manewaymja2

    No Hook at Launch. Need advice on Suspension Upgrades Please...

    Didnt bother to get them trust me it was so bad i didnt even get my slip. You know when you can feel like its taking 4ever to even move off the line and hiting the Rev limiter the entire way down the track tells me i definately need some Rear and front suspnsion upgrades just need to know which...
  6. Manewaymja2

    No Hook at Launch. Need advice on Suspension Upgrades Please...

    Front Stock Suspension....... No Sway Bar. Stock Shock aqnd Struts
  7. Manewaymja2

    Rough Estimate On Horsepower?

    Not Sure if this Helps but with my 306 Stock Block Setup with RPM Heads and a Procharger 8PSI i lay down 397 RWHP. Not sure on the 351 Setups, but N/A it seems logical to put down at least 350 - 400 RWHP.
  8. Manewaymja2

    No Hook at Launch. Need advice on Suspension Upgrades Please...

    Heres the run Down. My Car 1989 Mustang 306, SCT Tunned, 456HP, Procharger 8PSI, 8.8 Rear End with 3:73's, Running 26 * 10 1/2 MT Slicks, Upgraded Lower controll Arms, Stock Shocks, Subframe Connecters, 5 Lug Conversion, 8 Point Roll Cage. Made a Pass the other day and couldnt hook up the...
  9. Manewaymja2

    Welding a Differntial. Possible and How Too??/

    Hey guys have my car running nicely at the tracks except that the differential seems to not be able to lay down the torque produced. Want to do a cheap locker weld on the differntial and was wondering if anyone has done it and maybe some pics and addvice on the weld.
  10. Manewaymja2

    4 Lug Pro Star Wheels for Foxbody

    Intrested and only in Florida untill Friday. Would buy and pick up. post me a number to call you at please................:nice Matt
  11. Manewaymja2

    Pushrods Advice with Top End Swap. 302W Ford.

    Thanks Clement, anyone else with some Cam suggestions, And also the entire set up as i listed at the Top?????????????/
  12. Manewaymja2

    Pushrods Advice with Top End Swap. 302W Ford.

    Ok lets say i stay with the stud set up and not swap out to pedistal. Are they realy hard to sdjust as i have heard??????? Or is it just hyp..... Can i not use the spring that are on them already and just use the Rod Cheacker??????? Hardned Pushrods are the way ill go>>> And What about...
  13. Manewaymja2

    Pushrods Advice with Top End Swap. 302W Ford.

    Ok lets say i stay with the stud set up and not swap out to pedistal. Are they realy hard to sdjust as i have heard??????? Or is it just hyp.....:shrug: Can i not use the spring that are on them already and just use the Rod Cheacker???????:shrug: Hardned Pushrods are the way ill...
  14. Manewaymja2

    Pushrods Advice with Top End Swap. 302W Ford.

    Hey guys, let me just give a quick rundown on what my plans are before i ask anything. The Car: 1987 Mustang 302 W 5.0, I bought a pair of Edelbrock Performer Heads that i am converting from Bolt on 5/16 Rockers to 7/16 stud Mount 1.6 Rocker arms.the heads are 2nd hand but im sure they have...
  15. Manewaymja2

    Need Help with Rockers/Cam/Springs for 302 Edelbrock Heads.

    Is it that this question has been worn out, because i have googled this alot with no sucess. Any Help???????????:shrug::shrug:
  16. Manewaymja2

    What Rocker Arms To Use?????

    Hey there, wondering what rocker arms to use on my Edelbrock Performer Heads that i will be installing on my Mustang?????????????????????:shrug::shrug::shrug::shrug::shrug::shrug:
  17. Manewaymja2

    Need Help with Rockers/Cam/Springs for 302 Edelbrock Heads.

    Hey guys just bought a pair of heads for my stck 302 Mustang,they are Edelbrock Performer Heads that has some crane rockers on them now but one is missing (bought the heads 2nd hand). They are the Cobra rockers i was told, part number F3ZE-6529-AB. Well since 1 is missing im opting to change...
  18. Manewaymja2

    Cubic Inch Guys???????

    Well keeping in mind that i have RPM Performer Heads a Blower Comp Cam and a Procharger. With that in mind what do you think about the increasement of the Cubic Inch?
  19. Manewaymja2

    Show off your stang

    Hey There Guys Some Awesome Stangs in Here. Heres My Latest 89 Saleen with Supercharged 306 8:5-1 Compression. 456HP at the Crank made 397 lbsTorque & 393 WHP on 8 PSI Boost and room for More just want it to last.:D
  20. Manewaymja2

    Cubic Inch Guys???????

    Hey there just asking, would increasing the cubic inch in my 306 gain me any HP? Say use a Bigger stroke 3.500 (instead of the 3.000) that should place it at 357. Is that realy going to gain me any HP? Thanks Guys
Top Bottom
Back
Forums
Menu