Search results

  1. jdviper6

    Fox Sn95 K Member Into Fox

    If I do get 94-95 axles will the wheels clear the fender lip or do you think I will still have to do some fender rolling? Also, if it is true that the bolt holes on the fox 4 banger K member are in closer, does this help me at all?
  2. jdviper6

    Fox Sn95 K Member Into Fox

    88 2.3 mustang
  3. jdviper6

    Fox Sn95 K Member Into Fox

    From another thread http://www.stangnet.com/mustang-forums/threads/stock-k-member-question.866409/
  4. jdviper6

    Fox Sn95 K Member Into Fox

    I have read the 4 cylinder cars have a narrower k member. Is this true or false?
  5. jdviper6

    Fox Sn95 K Member Into Fox

  6. jdviper6

    Fox Sn95 K Member Into Fox

    After reading all of the above comments, I'm starting to have concern that my wheels wont fit. I guess it isn't the end of the world if they don't. Item specifics Condition: New Brand: Wheel Replicas Bolt Pattern: 5x114.3 Manufacturer Part Number: 45479653 & 45471653 Hub Bore: 70.6 Rim...
  7. jdviper6

    Fox Sn95 K Member Into Fox

  8. jdviper6

    Fox Sn95 K Member Into Fox

  9. jdviper6

    Fox Sn95 K Member Into Fox

    I have read that 96+ spindles will cause bump steer, withthe FOX K member and rack. Can I swap the fox A arms to the SN95 kmember? that should eliminate the bump steer, will it not. If not I think I can deal with the bump steer .
  10. jdviper6

    Fox Sn95 K Member Into Fox

    I have read that I might need shorter axles, is this true? This axle does have ABS tone rings.
  11. jdviper6

    Fox Sn95 K Member Into Fox

    I'm sure this has been touched on before. I just picked up a complete 1997 GT front and rear end. What is involved into getting this stuff onto my 88 Fox?
  12. jdviper6

    96+ spindles on a fox correctly

    Thanks for all of the advice!
  13. jdviper6

    96+ spindles on a fox correctly

    I know the hole is tapered, maybe i'm over thinking this lol :thinking:
  14. jdviper6

    96+ spindles on a fox correctly

    Adjustable outer tie-rod ends for correcting bumpsteer, Bolt-through spindle style, 1994-04 Mustang Fits 1994-04 Mustang with 1994-04 front control arms All stock power steering racks, 1994-04 All Mustang spindles, 1979-04 1979-93 Mustang with SN95 power steering inner tie-rods and SN95...
  15. jdviper6

    96+ spindles on a fox correctly

    I was planning on getting these http://www.americanmuscle.com/steering-offset.html And these http://www.maximummotorsports.com/Bumpsteer-kit-1994-04-Mustang-bolt-through-style-P450.aspx Serious question, what is preventing me from bolting these to the top of the mounting point of the 96 and up...
  16. jdviper6

    96+ spindles on a fox correctly

    From what I have read I will probably need the booster from a v6. The rear discs require added pressure.
  17. jdviper6

    96+ spindles on a fox correctly

    It has hydraboost, does that matter?
  18. jdviper6

    96+ spindles on a fox correctly

    Where are you getting 2 7/8 from? 96-98 GT 8.8 is .75" longer than the foxes per side. thats 1.5" wider overall.
  19. jdviper6

    96+ spindles on a fox correctly

    Well, I might have to get some shorter axles to replace the current ones. It is 3/4" wider due to the ABS rings, not a big deal the axle will still work.
  20. jdviper6

    96+ spindles on a fox correctly

    Did you read the posts above? I said I was swapping in a 8.8 out of a 97 GT replacing the 7.5 that is currently in the car. he said not to waste my time doing this swap.
Top Bottom
Back
Forums
Menu