Search results

  1. O

    Car won't start! Theft Light, SVTTECH Please help!

    Put in a new rear end recently. I guess next step for me should be to check all the fuses one by one.
  2. O

    Car won't start! Theft Light, SVTTECH Please help!

    Hi guys, I've got a 2001 GT I did a search before posting this, got various anwers... I saw that SVTTECH is on the ball with this issue as well, so I'd appreciate it if you can help me out. I was driving today, and pulled into the gas station to pick up a drink, got back in the car...
  3. O

    Vibration after rear end install?

    I haven't measured the pinnion angle, but the diff is definetly pitch down. The car is an automatic, so no clutch. The U joint is brand new, but it might be defective... Also the flanges are all tight, with thread lock on them. I'll try to set the pinnion angle and see if the vibration...
  4. O

    Vibration after rear end install?

    I just put in a 9" rear end on my car. I also got the steeda adjustable upper control arms. There is a slight problem, there is a vibration coming from the back of the car after around 30-40 km/h. It still does it in neutral, or even when I let go of the gas, not just when I am...
  5. O

    New custom made rear seat delete (with pictures)

    I don't like it... But that is just my oppinion, I hope you like it though.
  6. O

    Look what UPS man just dropped off at my house :)

    You need to update your signature picture, no more ding guards on those doors :)
  7. O

    Look what UPS man just dropped off at my house :)

    :nice: :nice: :nice:
  8. O

    What fender flares are these?

    I asked the owner of the vehicle, he said he bought them off Western Motorsports out in Calgary, Alberta (canada). I called them, and they said they dont' remember the brand but picked them up from Ebay, and they were specifically made for 99-04 Mustangs. They are also plastic, not...
  9. O

    Troque boxes broken? cracked?

    Can you tell from this picture, if the torque box(s) of this car is cracked or broken? Ignore the yellow circles, that was drawn to show something to someone.
  10. O

    Does this look bent?

    I just jakced up the car, it doesn't seem bent, but when I grab the drivers side UCA and push it left and right or up and down there is play in it, I am guessing the polyurethane bushings are shot, the passenger side is rock solid compared to this. Good excuse to upgrade to better UCA's with...
  11. O

    Does this look bent?

    Last night I did a couple of practice launches and on the last launch I heard a very unusual clunk/rubbing. I pull over, and the rear axle seems to sit slanted (drivers side tire is touching the front of the wheelwell and the passenger side tire is touching the rear wheel well)... I putthe car...
  12. O

    Diff fluid leaking onto passenger wheel?

    Smells definitely like diff fluid. In this case, do I need a complete new axle or just a seal?
  13. O

    Diff fluid leaking onto passenger wheel?

    The other day I was washing the car and I spotted a leak on my wheels, first I thought it was break fluid then I realised it is diff fluid. What does this mean? It is leaking jsut iinside the wheel? I've got 31 spline moser axles if it makes any difference. Axle Seals?
  14. O

    Tensioner bolt torque spec?

    What is the torque spec for the belt tensioner bolt? I tried to do a search or two, after looking through 15 pages of results I couldn't find it. Thanks
  15. O

    Check out my new and improved Novi 2000 idler pulley brackets!

    I didn't just get one made, I got a few since it wasn't worth just making one. If you search on MPH forums, u'll see similar issues with the bracket
  16. O

    Check out my new and improved Novi 2000 idler pulley brackets!

    My car has been bending the supplied aluminum bracket for the idler pulley with the Novi 2000, which I heard is a common problem when you start running more boost... I got steel ones machined to fix this problem and I just picked up the first one to test fit it onto the car... Has...
  17. O

    01-04 GT Novi 2000 bent idler brackets

    My idler bracket for my Novi 2000 is bent and it leading to shredding the belts and skipping ribs (completely coming off under full boost ~14-15psi). I will be getting my brother to make me this bracket out of a harder metal, I was wondering if anybody else is having this problem, and if they...
  18. O

    Yet another wheel offset question, help please!

    bump, no help?
  19. O

    Yet another wheel offset question, help please!

    I've ran 17X9's +28mm offset, and I was happy with the fit. Now I am looking to purchase 10" wide wheels for the back, but I don't know what the right offset is for the 10" wide wheels. I know for the 10" drag wheels I need 6.5" backspacing, is there any way to convert that backspacing...
  20. O

    Pulsing/ Jerking In drivetrain under Accel..

    did you check the reading you get from your TPS?
Top Bottom
Back
Forums
Menu