Search results

  1. Green Machine

    prochamber vs. x pipe

    Go for the O/R X-pipe. Here's my experience. I had FMS shorty headers with Bassani O/R x-pipe. Read alot about how good the Pro Chamber was. So when I upgraded to Mac LT's I ordered a MAC Pro Chamber. The fit was just a little off matching up to the LT's. The Sound - :notnice: it rumbled...
  2. Green Machine

    Need help on selecting Stroker shortblock to fit AFR 165 heads

    You're right. I've been looking for a 5.0 Mustang article, and I found it. This was back in Sept 2001. They did a compare of different intakes on a 347 motor from Panhandle Performance with Bassani LT's and 30lb injectors. The Eldelbrock Performer was tested and it put down 432lbs torque and...
  3. Green Machine

    Need help on selecting Stroker shortblock to fit AFR 165 heads

    It looks that way. I searched and found one post where ther recommended the AFR 185's for a 331 or 347. Of course the sales dude said 'sure the 165's would work with the 347'. He didn't say how well though. :D Anyway, If I went with the 306 pro street I know I could crank out some...
  4. Green Machine

    Need help on selecting Stroker shortblock to fit AFR 165 heads

    I want to make more hp and I know the lower block wont take it. i.e. SC My question is which of the 3 sizes of short block will work best with my AFR 165 heads and Eldebrock Performer intake ? See sig. for more details. My 94 GT has ~128k miles on it. Put down 281/308 with timing set...
  5. Green Machine

    Do you think this is an X or an H pipe?

    This sounds like a H-pipe. It's not a Bassani X-pipe I've got Mac Long Tubes, Bassani R/X O/R X-Pipe, and Bassani Quite Thunder mufflers. Let me tell you you will not regret getting a O/R X-pipe ! :nice: With the long tubes it sounds like a high pitch wail like an Indy car, but very deep...
  6. Green Machine

    GAS PRICES!!!!

    $2.48 per gal at the Sunoco station here in Lakeland / Central Fla. It's a 5 gal limit for me, and I'm budgeting $40 per month for now :(
  7. Green Machine

    Broke rear swaybar

    Had a weird clunk on the right rear. Thought it was exhaust, but it turned out to be the right side swaybar has snapped near where it bolts up to the frame. :nonono: So, I've ordered a Steeda HD swaybar, and should be here tommorrow. :nice: On the good side I was finally able to get the...
  8. Green Machine

    Bigger TB or keep the old one ? If bigger 70 or 75 ?

    Puttting down 281 / 308 with a FMS 65mm TB Given my setup would a larger TB give me more rwhp, or be a waste of money ? I'm thinking rather than a larger MAF, the TB would be a better place to start. Have a 76mm C&L MAF and do a 70mm or 75mm TB ( probably an Eldebrock) Would the 75mm...
  9. Green Machine

    Which Pro M MAF ? 77 or 80mm Shorty ?

    Excellent photos, Grady. I see what you mean with making the opening bigger :rlaugh: I like the straight shot to the tb. Stangfreak95 nice looking CAI and engine bay ! Grady, What size pipe did you use ? Do you have a parts list you could email me ? Looks like Lowe's will be a good...
  10. Green Machine

    Which Pro M MAF ? 77 or 80mm Shorty ?

    Is the filter that's supplied a slip on ? I'm using a slip on with the my C&L thats short and opened on the top, and I was thinking it might work with the ProM 80. I like to see how you did yours, so let's see those pics. Is the MAF connector long enough to reach inside the fenderwell ...
  11. Green Machine

    Which Pro M MAF ? 77 or 80mm Shorty ?

    Thanks for the update Grady. I think Anderson Motorsports has the 24lb 80mm with a 4" filter and I can put a power pipe into the fenderwell with that have a sweet setup. Thanks, Dewman :nice:
  12. Green Machine

    Which Pro M MAF ? 77 or 80mm Shorty ?

    Didn't see that coming, looked thru some catalogs that I thought were newer but not. Yup, just tried the web site, and no one home.
  13. Green Machine

    Which Pro M MAF ? 77 or 80mm Shorty ?

    Looking to put on a power pipe and a Pro M Shorty into the fenderwell. Need to know which one is better ? I'm putting down 281/308 with stock computer,stock cam, 24lb injectors and LT's. Those numbers were with a Pro Chamber O/R H-pipe, and I've now swapped that out for a Bassani O/R X-pipe...
  14. Green Machine

    3550 Tremec questions????

    Affirmative - had a 3550 installed 15 months ago on my 94 GT 5 speed. No problems so far. Had 112K on the worn out T5. Already had a FMS alum drive shaft on the car before the swap. Everything fit like a glove. Remember to replace the Throwout bearing and Pilot bearning if you're high...
  15. Green Machine

    Valve Covers - FMS VC will they fit?

    Whoo Whoo 159.95 on eBay, that's even sweeter ! Thanks RIO5.0
  16. Green Machine

    Valve Covers - FMS VC will they fit?

    Most Excellent tip. 165.00 vs. 192.95 = great deal. :nice: Thank you sir !! Dewman
  17. Green Machine

    Valve Covers - FMS VC will they fit?

    I'll check 'em out thanks !
  18. Green Machine

    Valve Covers - FMS VC will they fit?

    Thanks for the replys !! RIO5.0 thanks for the photo. Wow I love those chrome valve covers. :nice: I came across an article at fordracing last year, about Tommy Pedregon who's daily ride is Ford super charged 95GT. They listed out all the FMS parts and the chrome die cast VC's ones were...
  19. Green Machine

    Valve Covers - FMS VC will they fit?

    Ready to dress of the engine with some FMS valve covers. Has anyone used the following FMS vc's on there 94GT ? Chrome (die cast) M-6582-D302 This one is for 302 EFI cars or Black satin with raised Cobra Letters M-6000-C302 This one is for 86-93 EFI cars I have AFR 165 heads and...
View older results
Top Bottom
Back
Forums
Menu