Search results

  1. bock

    normal for tranny to grind under a hard shift???

    my t-5 start grinding a bit and some time from 2nd to 3 when hard shifting.I changed the tranny oil and ad a Doctor detroit tranny oil traitement.Never did grind again since 2 years.
  2. bock

    Winter Build-Almost Complete, But I have a TRANNY question!

    does that at all rpm? for me, if it shift perfectly.... you dont have a bent or wrong part it this thing...
  3. bock

    will 1.7 rockers and stock cam make a noticable idle.

    they are dynomax super turbo
  4. bock

    will 1.7 rockers and stock cam make a noticable idle.

    never went on a dyno.... maybe 325hp at the flywheel?! :shrug:
  5. bock

    will 1.7 rockers and stock cam make a noticable idle.

    best run: 12.68 @ 111mph in a full weight 93 LX.
  6. bock

    will 1.7 rockers and stock cam make a noticable idle.

    this is with stock pistons. maybe you will need custom pistons witn 1.7 RR
  7. bock

    will 1.7 rockers and stock cam make a noticable idle.

    over .100 of clearance on each valves. wan t to ear it? check my website, i have videos
  8. bock

    will 1.7 rockers and stock cam make a noticable idle.

    I did install 1.7 RR on a full stock 89gt.You will see NO difference at idle.
  9. bock

    maf sensor for my 24lbs

    hum.... very good thing to no......... thks!: i will be using a mac fender cai with #24 inj. check my web site to see my mods. i checked the massairsystem site, not sure witch model is good for me.
  10. bock

    maf sensor for my 24lbs

    i already have a c&L 73mm under the hood,but i dont want to buy the tube for the #24,and i want real stuff.....pro-m.
  11. bock

    maf sensor for my 24lbs

    you no the new name?
  12. bock

    maf sensor for my 24lbs

    I was thinking pro-m, but my speedshop say they dont exist anymore.So what brand is a good one?
  13. bock

    Should i change my clutch now...

    ttt
  14. bock

    Should i change my clutch now...

    Went at the track...the king cobra is not hold,about 50 runs on it,never slip until the last run:went for thr bunr-out,only one wheel spinning.(using M/T ET street)I stop,and retry my burn out.The clutch sliped...i sliped anough to make it smell and make the pedal very very smooth.... After...
  15. bock

    Pro-M MAF calibration

    Cool! thks.
  16. bock

    Pro-M MAF calibration

    Hey! were can i get my Pro-M 80mm maf calibrate? Its calibrate for #50 want it for #24. And is it expensive? thks!
  17. bock

    C&L MAF tube ...

    Cool ! thks a lot guys :nice:
  18. bock

    C&L MAF tube ...

    does the tubes for a 73mm are the same as for a 76mm? i want to change the tube in my 73mm.... passing from 19 to 24. CAn i use a 76mm's tube made for 24 lb?
  19. bock

    Just bought a 2.3

    Cool! i found that the injectors are 14lbs...
  20. bock

    Just bought a 2.3

    Hey, maybe this a bit off topic,I just bought a 1993 XL ranger with a 2.3 engine. What is the fuel pressure on this engine? What size are the injectors? How much LPH does the fuel pump push? Im asking this because i aslo have a 93 stang with a 5.0. And i want to no if i can use my stock...
Top Bottom
Back
Forums
Menu