Search results

  1. J

    86-93 mustang chrome shorties

    What brand are they ?
  2. J

    Best way to clean radiator

    It doesn't leak, and coolant flows but I wanted to clean out the build up.
  3. J

    Best way to clean radiator

    I recently changed to a 180 thermostat and when the coolant was drained out of the radiator I noticed corrosion on the fins of the interior of the radiator. It seemed to be a good amount at in some places. Anyone have any methods for cleaning/flushing it out ? I searched and found that some...
  4. J

    Sewing MACHINE NOISE...

    Might need some shims for the rockers to get them to where they need to be.
  5. J

    power cut almost completely under engine load

    Test the coil and check that all your ground wires are good.
  6. J

    Help, engine fails to accelerate past 1/4th throttle

    Does the coil ground itself to the strut tower ? If so the plastic washers might be preventing it from ground. Pull them off and see how it runs.
  7. J

    Looking for How-To on installing new ring and pinion

    I wanna say that on american muslce's website there is a how-to. Theres only a few things on a car that I mess with being transmissions and gears. I leave those up to people with the tools and experience.
  8. J

    Wheel Paint and Tire Mounting

    I waited about a week after I painted the rims to get the tires mounted.
  9. J

    Wheel Paint and Tire Mounting

    UPDATE: I painted the wheels using VHT Ford Argent silver wheel paint and their clear coat. Turned out nice, I will get pics up soon. I painted the rims with no tires on them and when the shop put the new tires on there wasn't a single scratch/chip in the paint. With good prep the VHT stuff...
  10. J

    new window rubber and channel runs. Options? opinions?

    Make sure the stuff you get is good quality molding. I got some two years ago and I can't remember where from but it was too thick and never "settled". It was a pain to shut the trunk and close the doors.
  11. J

    Yellowing Ford headlights

    When mine got a haze to them I took 1500 wet/dry sand paper to them and buffed them. They turned out like new.
  12. J

    Temp sending unit thead size

    Thats what I needed to know. Thanks.
  13. J

    Temp sending unit thead size

    I recently got a digital temp guage from summit along with a Summit Racing brand temp sending unit. The sending unit came with one adapter which is too big. Anyone know what size thread the temp sending unit is?
  14. J

    Reliability Question

    How many of you guys with aftermarket heads and cams have enough faith in your car to drive it a few hundred miles from your home. I want to put a set of heads and a cam, but I don't want to constantly be worried about something going wrong. I know that if everything is done right there should...
  15. J

    93 5.0 lx timing trouble

    Sounds to me like you may need a new crank pulley because the rubber in yours is slipping. It will never hold timing like that.
  16. J

    Wheel Paint and Tire Mounting

    Thanks for the info and link !
  17. J

    Wheel Paint and Tire Mounting

    I got a set of Ponys the other day that need some attention in the paint department. I have found that Duplicolor has a close match to the factory color. Question is has anyone used the Duplicolor wheel paint with tires off the rims and had tires mounted with the paint not chipping? I hate to do...
  18. J

    $50 Rustoleum Paint Job?

    A guy I work with painted a fifty-something truck with the Rustoleum. It turned out good considering the truck it's on. I know that he spent a lot of time sanding, buffing and applying numerous coats. If you were going to put it on a older vehicle that you didnt want an above average paint on...
  19. J

    New Paint -Stripe ground effects or not?

    I'm working on finding a nice set of Pony's for the car. I think the verdict is in, no stripe.
  20. J

    Looks like the stang is going back together stock

    Those are nice cars, good luck.
Top Bottom
Back
Forums
Menu