Search results

  1. C

    speedometer broken

    saturday my speedo wasnt working, after driving at 45 mph it stared to bounce 0-20-0 mph, then 0-30-0 mph, then presto it was o.k. well it did this untill lastnight, woulnt work at all after driving some time, and the odometer looked like this -------- . after turning the ignition off and on...
  2. C

    Dry (cai) oil gause air filter as a filter

    :bang: :mad:
  3. C

    Dry (cai) oil gause air filter as a filter

    after driving home during a very heavy rainstorm a few days ago, i decided to check and clean my (cia fw) air filter. after removal,the inside bottom looked like their was some dirty water, sludge, buildup. (conacale filter). this got me to thinking, how well does this type of filter accualy ...
  4. C

    hard to shift after th-storm

    I instaled a newclutch, pressure plate and flywheel about 4 months ago.
  5. C

    hard to shift after th-storm

    yesterday after work i drove through very hard and fast rain storm. nomaly going about 40 mph on the HW hitting the normal big puddles and sutch , trying to go down the road, but still slow enugh to be safe at speed. then driving through local roads very slow with 2-guesing 8 inches of...
  6. C

    gears: to change or not to change

    o.k. you should know :SNSign: has no fear of gear!? But if your not sure about the gears, talk to others who have mustangs with 3.73, 4.10 . ask for a ride or even ask to drive their car! most of us are more than happy to share our steed!! O.K. I just instaled 3.73 in my 2000 GT and woah is...
  7. C

    Clutch chattering and squeaking

    on the lift with a pro is the best, I guess you could do it with a jack, but that might be a real pita. maybe talk to a local shop , or even call and ask your dealer about an inspection?
  8. C

    Clutch chattering and squeaking

    not too sure what you mean about bad install? well my car has always been more difficult to drive with the a/c on! when my bud told me it was the motor mounts that was probably the problem instead of the clutch , I was like yah sure!!?? and one motor mount was shreaded, gone , and the other...
  9. C

    Clutch chattering and squeaking

    i took it to a friend who works at a dealer. he put the car on the lift and with a screw jack (gues thats what you call it) lifted the motor from the oilpan, very carefullike. we could see the cracks in the rubber when he lifted and lowered the jack. after we replaced them you could realy see...
  10. C

    Clutch chattering and squeaking

    my car was shuttering and struggling to get going and it turned out the motor mounts were shot, and I mean junk! this was after the 2nd clutch and bout 90,000 mi. could be that also?
  11. C

    how do i keep my terminals from corroding?

    every day? mine's only bout every 4-5 month's? GREASE or the spray from a parts store? just be happy Magnum P.I your in hawaii lol
  12. C

    Clutch and Flywheel install = weird noises?

    pull up on the clutch petal to adjust the slack, if its all stock.:nice:
  13. C

    Clutch and Flywheel install = weird noises?

    do you have an fire wall, or adj cable? im also having vibration problems after kc and flywhl replacement. my mech-bud, that replaced mine said I let the cable too loose for my feel, on the throw on the pedal? after we tighten the f/w adjer the vibation at 2000-2400 went away,,, well for about...
  14. C

    most out of dyno tune for dd

    my tax return is here,dyno tune here we come!!!what do I do or ask for with with my dd? I drive 40% hw and 60% stp-n-go. I'm looking for the best all around tune for the dd without having to run 91-93oct gas. bump the timing im told and fix the a/f ratio for optimum. also im going to instal...
  15. C

    plez help very bad vibration

    thankyou for your awesome instalation post and tip's!!!! but my main concern is what can i do to find out what is o.k. and what i need to fix or replace. i understand this is very hard to diagnose, im just so confused , everything is new ???????? do yall think taking it apart and trying over...
  16. C

    plez help very bad vibration

    well it was a side job, we just used his stall at the dealer. and yup averything was bolted up with a small but still a impact. i diddent think their was a special way, ive done a few in the past with dad on our back in the driveway, dont want that any more! but everything went together good...
  17. C

    plez help very bad vibration

    I INSTALED A NEW FLYWHEEL AND KING COBRA CLUTCH WITH NEW PILOT BEARING AND TOB AT THE HELP OF A FRIEND WHO WORKS AT A DEALER, WITH AS MUTCH IF NOT MORE KNOWLEDGE AS I ABOUT MUSTANGS!? NOW I HAVE A VERY HARD VIBRATION AT 2000RPM DRIVING AT NORMAL, IT GOES AWAY IF YOU PUSH THE GAS , OR IF I DEPRES...
  18. C

    Aftermarket Clutch/Quadrant Users, come on in...

    im having issues also with steeda adj, and quad only after clutch change, no problem with stocker? now are you sure you think the firewall adj is almost ALL the way out??? it does have quite amount of threading on it,about 3".
  19. C

    stiff king cobra clutch?

    thanks for all the advice when i was freaking out!!! well it did ease up some after 964mi of 40% city 60% hi driving. now their is a deep droning vibration that i can feel in my butt and ear drum, but not the shifter!!!! at 1800-2200 rpm in almost every gear....:bang: it was very slight at...
  20. C

    I need adv on an exhaust question

    oooops, you got flows, well im always told you get what you pay for! As for the h pipe, dont go for it what you need is a MAC pro chamber w/o cats!! o.k. everyone knocks mac for the fit, but this one makes power.... and for the cat back ( I who does not have a cat back yet ) would go with...
Top Bottom
Back
Forums
Menu