Search results

  1. 5.02GO

    Exhaust in Coolant

    I use ARP head bolts. I ran a tap thru the threads in the block befor i install heads. I torque my lower intake bolts (ARP) to 21 lbs. It took around 10 times befor all the bolts hit 21lbs.
  2. 5.02GO

    Exhaust in Coolant

    The reason why so tight?? Thats just what my friends go to. I realize thats not a good answer, but its the truth. Is 100/90 and issue? Too tight? Should i go 85/75 next time? ------------------ I have had issues with the felpro 1250 intake gaskets not holding a seal. Last weekend i...
  3. 5.02GO

    Exhaust in Coolant

    Personally i think felpro intake gaskets suck really bad.
  4. 5.02GO

    Exhaust in Coolant

    The heads are edelbrock performers (aluminum). I had them machined to see if they were warped. My friend took off .010. There was only .004 warpage. They reason he took .010 off was because i wanted him to machine the O-ring out. Tired of Felpro loc wire head gaskets. I used a rolxtreme...
  5. 5.02GO

    Exhaust in Coolant

    Okay. I replaced head and intake gaskets last week. I have been driving the car around and i smell coolant. I got the car home and noticed that the coolant overflow bottle is overflowing with coolant. This has happend twice. When the car is cold there is NO coolant in the bottle. Also...
  6. 5.02GO

    Slow start with new Alt.

    K guys, here is the deal........... Last weekend i had the heads milled and the lower intake. While i was putting this thing back together i installed a PA Performance 130 alternator. It was wired up according to the instructions given with alternator. Yes, i installed the 4 awg wire...
  7. 5.02GO

    Need recommendations for a new clutch. Many ?'s

    Centerforce Dual Friction.............You wont be sorry. . . . . . . . Oh, you wont wear your leg out when your driving in the city either...:nice:
  8. 5.02GO

    PA Performance Alternator Questions

    well guys, got the motor running. My car is a different car now. Befor, nasty surge idle at times. Not anymore. Befor, low headlights at idle (underdrives). Not anymore. Befor, Motor would bog slightly with headlights & AC or Heater on. Not anymore. Befor, turn signal would blink...
  9. 5.02GO

    PA Performance Alternator Questions

    Mine is fused at 200.
  10. 5.02GO

    PA Performance Alternator Questions

    Guys i received my PA Performance 130 the other day. I havent wired it up yet because i am re-assembling my motor. I have looked thru and read the instructions from PA Performance. IN MY OPINION, there is NO reason to connect the stock black wires to the post of the new alternator. I mean...
  11. 5.02GO

    PA Performance Alternator Questions

    i really dont mind cutting wires if i have to. As far as the 130 amp alternator, i am not sure i can fit it in the bracket. I am running a Novi 1000 so my setup is way different than stock. I am not even using the same bracket. Does the alternator come with the new parts so the wire...
  12. 5.02GO

    PA Performance Alternator Questions

    which is the power cables? I have a 3 wire cable. I also have a 2 wire cable.
  13. 5.02GO

    PA Performance Alternator Questions

    Hey guys, I am wanting to get an alternator for my mustang. I really dont know exactely what to get. 95,130 or the 200? I feel like the i dont need the 200. So probobly the 95 or the 130 SHOULD fit my needs. I am still running the stock alternator that came on my car from the...
  14. 5.02GO

    Code66 MAF fault. Jricher....come on in brotha!

    the year is 1993. The mods are listed below. I have already cleaned the elements. No engine light. The car runs good. Codes have been cleared in the computer twice but i still get the fault. Thats what i dont understand. I'll do a voltage test later today. thank you.
  15. 5.02GO

    Code66 MAF fault. Jricher....come on in brotha!

    Code66 MAF fault. Jrichker....come on in brotha! okay... I hooked up the code scanner today an retrieved a fault. Code 66 which is "MAF/Vane air flow sensor too low - grounded or transmission oil temp too low" This came from my autoxray easy scan 5000. I occasionally hook the...
  16. 5.02GO

    Running Boost on a 93 motor? Hypereutectic piston question.

    Been running 5 psi since 1997 on my motor. Stock bottom end motor.
  17. 5.02GO

    Passenger Tailpipe Hotter??

    Okay.... If the passenger side is running leaner, how can i be sure? If the cat is clogged, how can i find out? In other words, how can i troubleshoot this? thanks for the help. oh, could a blown head gasket cause this?
  18. 5.02GO

    Passenger Tailpipe Hotter??

    I just recently installed two Borla Pro XS mufflers on my car. I replaced the tailpipes too. I have noticed that the passenger tailpipe being noticably hotter than the driver side. My car could have been doing this for a long time. I just never checked. I also run a stock hpipe. I...
  19. 5.02GO

    Borla exhaust installed....Drone

    Yep. My hpipe has cats in it. I am gonna get the pipes off upper control arms reguardless if it cures the drone. I am just HOPING that the drone is being amplified because of that. Man, i had to stop a the dealership today and i even asked if they could get the ORIGINAL mufflers for my car...
  20. 5.02GO

    Borla exhaust installed....Drone

    Hey.... I installed some borla pro xs mufflers and new tails this weekend. I chopped off the ole flowjunker 2 chambers and threw them outside. Sick of that stupid drone. Well........I cant tell much of a distance between the two mufflers. To me they sound kinda the same. Still have...
Top Bottom
Back
Forums
Menu