Search results

  1. fivemustangs

    t5 bellhousing spacer

    I just picked up a 2002 3.8 T5 that I want to swap into my wifes 91 GT. I know all the options, getting the 94-95 Gt bellhousing, swapping input shafts because both the bellhousing and input shaft are 5/8 inch longer. But I was wondering if anyone has made a spacer plate to go between the...
  2. fivemustangs

    tubular bumper supports for sale?

    saweet, ya i saw them when I was looking through the pages yesterday but it looked like it stopped at 90- but now I just looked and I can see it says 04 at the bottem of the writing behind some other writing. Thanks a lot!
  3. fivemustangs

    tubular bumper supports for sale?

    Does anyone know were I can find a tubular front bumper support for my 02 Mustang gt? I am doin a cxracing intercooler upgrade and reduing all the piping and want some extra clearence and air flow to my intercooler but cant not find any for sale!!! I have found them for foxbodies but not 99-04...
  4. fivemustangs

    max power on stock 2v heads?

    Thats some crazy power on stock PI heads, it sounds like a little porting and you can get a lot more power out of it. I know a person that does pretty cheap port work with a flow bench, been doing it for a little while. I wish a bottom end was as cheap to build as a 5.0!
  5. fivemustangs

    max power on stock 2v heads?

    The idea was to build a strong bottom end and then later down the road when I have more money I would add some heads, I was just curious to see how much hp the stock heads could really flow because I could not find anything online, which I still have no anwser for. I didnt ask this question...
  6. fivemustangs

    max power on stock 2v heads?

    I have been looking around but could not find the max amount of hp anyone has got with stock 2v heads on a forced induction engine. Does anyone know what you can make with a built bottom end, intake, cams, exhaust and say 15-16lbs of boost on stock unported heads? also all supporting mods...
  7. fivemustangs

    15" tires vs 18" tires

    Ya I would def. say that them 18's didnt have an issue going down the track. He has a 67 mustang but I still think a nice set of 17-18's would look pretty nasty but he likes the old school. He also does not like........fuel injection! hahahaha, and as it stands right now my 18's would hook...
  8. fivemustangs

    15" tires vs 18" tires

    I was wondering peoples opinion on 15" tires vs 18" tires my brother is always talking smack about my 18" rims and tires and would never buy anything bigger then a 15" because he says you cant get tracking. But I have a set of M/T drag radials on my 18" bullets and they stick ALL day on the...
  9. fivemustangs

    91 Mustang banjo bolt size??

    Bump.
  10. fivemustangs

    91 Mustang banjo bolt size??

    can anyone tell me the Banjo bolt size for a 91 Mustang gt, for the split on the rear brakes. I lost my old bolt and now I need a new one and need the thred size and length! Thanks!
  11. fivemustangs

    20psi fuel pressure on boosted 02' GT

    Well I took the car for a ride today and the fuel pressure was between 28 and 40 during cruise but when i down shifted the pressure would still drop to 5 psi and then jump back to 30. At times the car would be perfect and fluctuate between 35-40 were it usually was. WOT seemed to be ok today and...
  12. fivemustangs

    20psi fuel pressure on boosted 02' GT

    bump.
  13. fivemustangs

    20psi fuel pressure on boosted 02' GT

    I was coming home the other night and gave it WOT at the passing lanes, after I got to the end I noticed my fuel pressure gauge was reading 20PSI during crusing speeds! when I listened there was a ping under boost so I took it easy the rest of the way home. The next day I started it and it was...
  14. fivemustangs

    8.8 upper control arm bushing removing from axle housing??'S

    I know this is a very old thread but I wanted to give my 2 cents, I was searching how to remove my bushings from my 91 GT and it was either burn them out of beat them out. I thought there must be an easier way so I went to my local parts store and rented a Ball joint press and with the help of...
  15. fivemustangs

    p1000, p0602,p0452, 02727

    After some extensive research I have found other people have had some of the same problems when they had a previous tune that did not get erased before getting a new tune. Does this sound right? is there some way i can remove the old tune that was on my preditor and reflash the new tune thats on...
  16. fivemustangs

    p1000, p0602,p0452, 02727

    Hey everyone, Im having an issue with my 02 mustang gt. When I go to start it up it will crank and not start the first try, then the second try it is hard to start but it will start. After that it will run fine with no problems exept for a check engine light. After it has been ran for a little...
  17. fivemustangs

    speedi sleeve part number

    Does anyone know the part number for a 302 crank shaft repair sleeve or speedi sleeve? I am trying to buy one from summit racing but can't find it on there website. Or maybe a NAPA part number? Thanks!
  18. fivemustangs

    Pypes O/R X pipe? Or...........

    Ya I drive from Bar Harbor to Ellsworth looking at every gas station for 93....Nothing, took a look online and everyone says they stopped selling it, so it looks like I will be getting that meth injection sooner then I thought. Then its back to NH for another tune in August.
  19. fivemustangs

    Pypes O/R X pipe? Or...........

    Ya its pretty much down to what i can find cheaper, I have only heard good things about magnaflow but it is a little out of my budget right now and I plan on L/T down the road. Im selling my NOS bottle opener to buy this thing and then selling my scrap cats from my stock H pipe to make up for...
  20. fivemustangs

    Pypes O/R X pipe? Or...........

    I have only read bad things about pypes installs though, I am leaning more towards UPR now because I found one $152 shipped and more often then not people say they fit pretty damn good. Because if I cant get a lift im gunna be doing this on my back with jack stands. :notnice:
Top Bottom
Back
Forums
Menu