Search results

  1. O

    radiator to block clearance question. 94 95 compared to a fox

    Hi Guys, Hey I have a 91 fox with a blower and I would like to move up to a 1994-95. I plan on keeping the blower and installing it on the newer Mustang. I would like to know if anyone knows if there is more or less room between the block and radiator on the 94-95? With the set up I have...
  2. O

    4 lug to 5 lug

    Isn't there a problem with a lot of wheels not fitting the ranger stuff? center of the wheel hits or center caps or something?
  3. O

    Cooling system problems radiator cap question

    Hi, I have a problem I have never seen before. I can't get my cooling system to hold any pressure to speak of at all. And it wants to kick the coolant out. I was working on it getting ready to make a overflow bottle and I noticed that when I squeeze the upper hose to see if there is any...
  4. O

    88 GT hatch 5.0 manual Vibration

    I think it was same angle on both Let us know what you find
  5. O

    Rear hatch striker problem

    Hi, I have a 91 hatchback and the plastic that goes around the striker is wore out. At first I could just turn it until the bad part was on the top and bottom instead of the sides and it would close just fine. Anyone know where to get a new one or what works good as a replacement? looks like...
  6. O

    88 GT hatch 5.0 manual Vibration

    pinion angle will do this. The angle of the drive shaft coming out of the transmission must match the angle of the drive shaft entering the rear end or they will bind. The worse the misalignment the the worse the vibration at lower speeds. Check the rear transmission mount and see if it...
  7. O

    Motor mounts question

    Ok,,, I'm in,, I don't see how it bolts to the block ether. is there more to this mount?
  8. O

    front bumper cover in my lx 1990

    I went through this when I replaced the front clip on my 91. As I remember it the bumpers will interchange but the inner fender wells and the fender extensions must match the year of the fenders I think it goes 87 to 90 and 91 to 93 < someone correct me if I'm wrong) It's...
  9. O

    question about GT-40 heads

    I talked to the machine shop that has the heads and they are the F3ZE-AA heads I think that's a 93 cobra head. Maybe someone drilled them out to fit a 351 or something? I can get these heads for $369 totally redone and ready to go and free shipping I don't think I can pass them up.
  10. O

    question about GT-40 heads

    I'm doing a little boost I was going with 1133 fel pro MLS gaskets and ARP studs. Sound about right?
  11. O

    question about GT-40 heads

    Hi ,, I'm looking thinking of picking up a set of GT-40 heads. Not the GT-40p If I run the the GT-40 heads on my 91 5.0 will the head bolts be to small and require the adapter washers? I'm told that with the GT-40p heads that there may be a problem with the way the plug angle and the...
  12. O

    foxbody wagon...WTF

    Ford has cars in england that look just like a mustang but they are a 4 door That's a strang looking thing.
  13. O

    Need some pictures!

    This is a fox with a 6-71 blower at work Hot Doughnuts! - YouTube
  14. O

    Ok to run trick flow twisted heads with stock pistons?

    Hi, I am looking at a set of used Trick flow twisted heads. Will there be a piston / Valve clearance problem if I run stock flat tops w/ valve reliefs? The heads have 202 and 160 valves 60cc combustion chambers. the cam will be a ford F303 512 lift. And I will be using MLS head gaskets...
  15. O

    what do I do about an oil leak?

    keep in mind that sometimes if the main bearings have to much wear on them that it will allow the crankshaft to move up and down a little and a new rear seal main won't hold long. Just my .02
  16. O

    More boost in the rain?

    It was raining today and I took the Mustang out just to sort of see what would happen, It ran the same until I pushed it. Keep in mind I'm running a roots style blower and the scoop doesn't miss anything. If it's in the air it's going down the blower. Funny thing was where I usually have 8lb...
  17. O

    who has a custom overflow tank for the cooling system?

    I'm so cramped for room I had to use two 10" fans the belt on the blower sits to close the the radiator to use one big fan. I like the looks of the home made one. I'm going to need to get out my tape measure and see what I can use.
  18. O

    who has a custom overflow tank for the cooling system?

    Hi, I have a 91 Mustang and I need to get an overflow tank of some kind on it. Anyone know of a custom tank that fits nice in the fox body? I'm running a aluminum radiator with electric fans
  19. O

    Back of a 5.0 intake for temp sending unit? Bad idea

    I had drilled and taped two holes in the rear of the intake. As it turned out I used both of them one for the stock gauge just so i didn't have a dead gauge and with the set up I have now I needed to use the other one for the heater. I hope that I pick up enough heat to keep it warm this...
  20. O

    Poke-n fun of the 6-71?

    Yea I know,, You should see that thing flapping around at 6,000 RPM looks like it is way to loose and going to fly off. But it's tight when not running
Top Bottom
Back
Forums
Menu