Search results

  1. gingerbreadman

    GBM bought a new truck, pics and details inside.

    uggg, :( sorta like the mustangs, you pay for what you get and its way worth it to buy something good to begin with then to bring back from the dead, I looked at alot of them and i seen alot of junk even at the asking price of what i payed for this one. $3700 -gbm-
  2. gingerbreadman

    choosing carb (77 f250 4x4)

    as in this THREAD I bought a new truck. in short its a 77 f250 4x4 351m 4 spd 410 gears. I need a new carb for it, its got a edelbrock intake on it so a 4bbl is in order. I lean towards holley for there popularity. What do you recomend for a carb for it? electric or manual choke...
  3. gingerbreadman

    GBM bought a new truck, pics and details inside.

    I was hoping youde come around, I was wondering how the winch dealt with overloading it as theres no way in hell it would stall with a 200+ horse power motor geared down to nothing powering it, I didnt think they would let it tear itself to pieces so I thought they'd use a shear pin, do you know...
  4. gingerbreadman

    GBM bought a new truck, pics and details inside.

    LOL i know, i have plans for that, its hard to mount a pto winch the same as a electric winch, thats why it sticks out like it does but i think if i angle the corners back to the front end it would look less homemade. aint no showqueen but I think the trucks relatively solid. -gbm-
  5. gingerbreadman

    GBM bought a new truck, pics and details inside.

  6. gingerbreadman

    GBM bought a new truck, pics and details inside.

    Umm ya stangnet and there file size limit makes my day good :nice: can someone host some pics for me??? email me [email protected] or msn [email protected] -gbm-
  7. gingerbreadman

    GBM bought a new truck, pics and details inside.

    Let the threads begin, I dont learn very quickly now do I boys I bought yet another "old" ride. But at least this time its in reasonable shape to begin with and has a certian coolness factor. Its a 77 F250 4X4 camper special. 351m 4 spd It has the open knuckle high pinion dana 44 front...
  8. gingerbreadman

    metal repair in a tube?

    :rolleyes: LOL too funney, -gbm-
  9. gingerbreadman

    metal repair in a tube?

    My uncle had a bob cat and when he bought it he noticed that the side of the block was patched together with some stuff called "J.B. weld", it probly threw a rod one day. that stuff is a metal bonber/filler and its 2 part aswell... it held together as long as he owned that bobcat..... for a non...
  10. gingerbreadman

    another what would you pay question

    yes it was rare but a clone is easily made from the readily available 1697 model wich had a few extra options, a 3rd horse, a removeable plow and it was the first year to come with a canopy over the wagon for the misses.... -gbm-
  11. gingerbreadman

    not enough heat (im running outa ideas here)

    bring on the propane :rolleyes: -gbm-
  12. gingerbreadman

    Pak and oz banned???

    link me up scottie :shrug: -gbm-
  13. gingerbreadman

    not enough heat (im running outa ideas here)

    No digi camera since moved outa parents place so no pics.... I didnt block any of the core just the edges like the stock foam did... -gbm-
  14. gingerbreadman

    not enough heat (im running outa ideas here)

    Iv had the entire heater assembly apart both engine compartment and under dash, the temp flap and defrost/heater vent flap are working fine..... theres no leaks anywhere either.... -gbm-
  15. gingerbreadman

    Pak and oz banned???

    excuse me 2bav???? you banned these stangnet founders??? :bs: please show me where and why you decided to do this..... -gbm-
  16. gingerbreadman

    not enough heat (im running outa ideas here)

    The hoses are not clogged nor is the system, flushed and new coolant a month ago.. both heater hoses and the heater core are hot... How do I check the flow through the heater hoses??? I could put a 195 thermostate in there but this truck has a tendancy to run too hot in the winter when...
  17. gingerbreadman

    not enough heat (im running outa ideas here)

    Ok, its 85 f150 4x4 300 Inline6 on propane...with the high output heater (non a.c.) I replaced my heater core a month ago cause it was leaking, since then i have had **** pore heat.... I have a mechanicle gauge in it and its running at 180 degrees fairenhieght... -The foam insulation...
  18. gingerbreadman

    Help me narrowdown the non working front brake problem. please :)

    I like this guys idea, start from the bottom (calipers) and move along opening each joint untill you find fluid coming out while you have someone pump, if you make it all the way back to the master cylander then thats your problem.... chances are the calipers are froze up, but it sounds...
  19. gingerbreadman

    666 and engine NUTS

    Does his engine use the "top piston" as a 2 stroke valving system where it reveals the ports as it goes by??? -gbm-
  20. gingerbreadman

    Let's Play a Game: Oil Pan or Rear Main Seal?

    When my dads 79 300 i6 rear main seal leaked it played havick with the clutch.. but you allready took this into consideration... I know my buddy replaced the pan gasket on his 77 t-bird 400m and it took him 2 tries..... lets hope its the pan thats easier to fix :canflag: -gbm-
Top Bottom
Back
Forums
Menu