Search results

  1. black50

    SuperCharger Tuning Help

    Have a couple of questions concerning tuning on a supercharger? What should the base timing be with running a 10-13lbs of boost? I pulled the spout and set it to 8 base, car wouldn't idle unless I adjusted the TB "accufab 75mm" to dump more fuel. But as soon as I put it in gear the car...
  2. black50

    Starting from Scratch with timing

    88 GT 302w HO Pretty much starting from scratch installing new plug wires, distributor cap, and distributor? For some odd reason I don't see any numbers on the Balancer so getting to TDC from 0 is out of the question! easiest way other than the Finger over the plug method would be great...
  3. black50

    352cu

    I'm going to look at a short block today? its supposed to be a mexican block, .60 over dished pistons, scat h beams 3.40 stroke with a scat forged crank tied together with a main gridle, canton oil pan high flow oil pump. does anyone know what the casting numbers are on a mexican block. this...
  4. black50

    UPR adjustable Clutch quad, and Firewall Adjuster Question

    Just getting around to installing the three Way adjustable clutch quadrant, and firewall adjuster. with the Clutch cable arleady out through the firewall, about to route it back to the quadrant, Should the white Plastic before the rubber geromet be removed before routing through the firewall...
  5. black50

    kenne bell and Turbo Combo

    Reading Fast Fords and Mustangs new issue had a 03 corba still equipped with the stock supercharger with a different pulley, running twin 60mm turbos, Titled the mattahan project, set-up was capable of producing 75psi to the intake manifold, LOL not that they did, but the theory behind it was to...
  6. black50

    Cam to lifters to heads relations

    I've been reading alot about building shortblocks, theres some information pertaining to picking the right cam, but no information on how hydraulic roller cams shafts work in relationships to the lifters, hoping to get alot of feedback on these questions, motor runs on a four stroke combustion...
  7. black50

    Mild Street class

    :Track Building A new motor for the mild street class for next ford fever classic @ mir max cu. for this class is 331 n/a stock suspesion oem replacement, no sheet metal intakes full interior curb weight @ 331 has to be 3200 lbs. I want to take my two bolt main block to the max with a main...
  8. black50

    Confused? any suggestions

    just bought a 90 Gt with a gt-40 crate, I was told the timing was off, so I got it fixed, when I bought the car it was running around 29 pounds of fuel pressure. the timing was set at 10, and was corrected at 14, I changed the spark plugs, and wires, I noticed that cyc. 4 and 8 with running...
Top Bottom
Back
Forums
Menu