Search results

  1. 84convertablegt

    Quick EFI firing order question?

    OK, ive checked out fordfuelinjection.com and its kinda vague in my opinion on this subject. I want to know what you all have done about firing order issues. i want to keep the old school cam, and not change to an HO cam, so what is the best route to go so my idle isnt crap if i go to efi? Is...
  2. 84convertablegt

    Something Popped!!

    if its just draggin, id say something brake related. better not drive it until u figure it out. especially if its brakes or anything really for that matter. could be something in the rear end, but unlikely. sometimes a consistent knocking is a u joint, but you wouldnt have the lag id say. how do...
  3. 84convertablegt

    Raped by an ebayer

    was it ups? because i was shocked when i saw the price. i sent mine out west somewhere from columbus. from now on with big stuff, ill get it quoted first. i learned my lesson!
  4. 84convertablegt

    Raped by an ebayer

    heres the other end of the spectrum. a seller (me) not doing my homework. i always charge a flatrate shipping charge to anywhere in the us. i estimate the size and weight shipped to cali from ohio. pretty good estimate. im usually only a buck or 2 in either direction, that way a buyer can pay...
  5. 84convertablegt

    70 mustang wipers don't return to "park" when turned off

    wow, i didnt even think of that when i got my car back from the bodyshop. i just installed them and tried them out. im glad they took them off down. i would have been mad if i scratched my brand new paint :D
  6. 84convertablegt

    Question about axle oil seals....?

    Yes, u just need rear axle seals. 2 of them. those are the only seal on the end of your axles. its simple. they slip up against the back of the bearing facing the center section. i was in a bind once and used rtv black since i couldnt get a new seal fast enough, and it works fine since the...
  7. 84convertablegt

    Auto Trans w/ Hi-po Camshaft

    I'd definately buy it from him! You wont be sorry :D
  8. 84convertablegt

    Overheating. need bigger radiator?

    do they sell ones with both outlets on the passenger side?
  9. 84convertablegt

    65 Stang Aluminum Radiator

    im assuming you found my post in the other cooling thread. http://forums.stangnet.com/showthread.php?t=552476 heres what i found! should work great :) ,http://store.summitracing.com/defau...t=egnsearch.asp
  10. 84convertablegt

    8 inch rear opinions

    I would have no problem believing that. 400 isnt that much h.p. also, an 8.8 some would argue is just as strong as a 9", but im sure its not as strong a fully built 9" with all the goodies. but you can beef up an 8.8 too.
  11. 84convertablegt

    Overheating. need bigger radiator?

    well basically then, im still glad i found that radiator for other people. i know the reason i didnt originally do the change to a crossflow was because i didnt think they made a 22x19 with both outlets on the passenger side. i didnt want to have to change the upper hose setup. so for everyone...
  12. 84convertablegt

    Oil flow

    oil comes out of the tube? please explain. first of all, the cars were either open emissions or closed emissions. closed is like what yours sounds like it was supposed to be. the cap pulls fresh air into the crankcase through the cap from the air cleaner and then the pcv sucks air and crankcase...
  13. 84convertablegt

    Auto Trans w/ Hi-po Camshaft

    No, it wont harm anything, but if the cam is made for the 2000 up range, u wont get the best performance at all. you car will fall on its face until u get into the 2000rpm range. i understand your wanting to get the car going, but now is the time to get the higher stall converter while the...
  14. 84convertablegt

    Overheating. need bigger radiator?

    i also noticed that if you go to the griffin site they do sell a 22x19 radiator that has inlet and outlet on passenger side part no. 1-28182-X. i dont know how the crossflow aspect would work, but it is a crossflow radiator. the problem is not many people carry them, but you can buy it from...
  15. 84convertablegt

    Nothings ever easy

    im not too familiar with clevelands, but could your vacuum leak be where the intake actually mounts to the heads like on a windsor? this is a common problem. also, are u using a carb spacer. i tried using the factory 4bbl spacer when i added a holley and edelbrock intake and even with all the...
  16. 84convertablegt

    Help! I'm Bleeding!

    when you are bleeding brakes, what do u look for? how do you know you can stop bleeding the brakes in other words? how many pumps until you know the fluid has traveled all the way from the master cylinder. im trying to get pumped up myself about changing the master cylinder.
  17. 84convertablegt

    im leakin like hell

    :rlaugh: LMAO!
  18. 84convertablegt

    Got some pics of the 65!

    its hard to tell in the pic, but it doesnt look like u have tall valve covers. i had no problems getting mine off and on with the export brace in place. just in case you were wondering.
  19. 84convertablegt

    Got some pics of the 65!

    The car looks great IMO. the black grill molding is different, but nice :) Id also add a chrome export brace to finish it off. Despite some peoples troubles installing an export brace, its simple and your car will not fall apart. Just unbolt the old crap braces, line up the new one and bolt...
  20. 84convertablegt

    I know, Brakes again

    cjponyparts.com has a brake line kit that will give you every piece you need except the 67 master cylinder to adapt the lines at the master. its like 17 dollars. as far the the power thing, you will need one of the conversion booster setups. this will cost more money. im just gonna do the dual...
View older results
Top Bottom
Back
Forums
Menu