Search results

  1. R

    heater core removal

    Yes dash pretty much has to be totally removed, royal PITA. very common do a search here and on google there are tons of threads on how to do it. I paid to have mine done..................
  2. R

    351W rwhp guess?

    Have the following build-up going in right now. anyone want to give me a rwhp guestimate? 351W w/ .03 over bore 357ci AFR 185's w/ 58cc and 10:1 c/r CompCam XFI 236HR-14 ( .579/.579 - 236/248 @ .050 ) TrickFlow 5.8L R intake 70mm TB w/ 76mm MAF 24lbs injectors, Trickflow fuel rails...
  3. R

    TKO 600 install?

    Thanks guys, Go pick up the trans tomorrow, probably just get a stock bellhousing for now. Only going be putting about 400+/- hp too it to start off with. Sure I'll have some more questions as the install progresses.
  4. R

    how to put efi 351 heads on efi 5.0

    +1, they make bolt bushings just for that
  5. R

    TKO 600 install?

    Can get TKO 600 at local Ford Dealer for $1675 ... so not too bad a price. Will go ahead and get the SFI bellhousing. think they had Lakewoods for $300, is that one ok? Getting a TKO 600 cause dropping a 351W in and my stock T-5 is on it's last leg ( grinding, wont go in gear, pops out...
  6. R

    TKO 600 install?

    good to know........ what about the bellhousing? stock ok? getting expensive already
  7. R

    TKO 600 install?

    Was your install pretty straight forward? Really think I need a $300 SFI bellhousing? or will $160 stock be ok? never going to the track
  8. R

    351 Windsor

    www.coasthigh.com but they only make 393W and up. I called local run of the mill engine rebuilder. mine is for lite street duty. so ordered: Stock 351W roller block, .03 over bore, ARP rod and main bolts, Forged 13cc dish pistons, Oil pump, flywheel, balancer, TFS stage 1 cam, timing...
  9. R

    TKO 600 install?

    Think'n about getting a TKO 600 and CenterForce clutch with engine swap I'm about to do. I know I need new bellhousing and yoke Do I need new driveshaft? What about the crossmember? Going into 1989, 5.0 vert.
  10. R

    need help have oil in upper plenum

    Welcome to the BBK - SSI intake - PCV woes CLUB.:nonono: :mad: :notnice: I recently installed one myself. Have same problem. Put on air/oil separator and it will fill up with 4-5 hard take offs. I've been talking to Brian Rogers at BBK and he is stumped as to why it's doing this...
  11. R

    turbo 347 stroker? would it work?

    +1, you will be running the risk of splitting a stock block
  12. R

    Where to order 351W short block

    Any suggestions on where to order a 351W short block from for lite street duty? Know of CoastHigh and DSS....... any others?
  13. R

    Disappointment at the dyno: 227 rwhp with afr165's and custom cam

    yeah something is not right there. I put down 260rwhp with AFR 165's, stock cam, 1.7rr's, full exhaust, SSI intake and I thought that was way low. I also just bumped my timing to 18* and it's running fine still. are you setting your timing with the spout connector out? sounds like...
  14. R

    How do I add 2nd PCV valve to drv valv cvr?

    I found your picture. http://forums.stangnet.com/attachment.php?attachmentid=45083&d=1149575196 How did you attach that? what is that metal cap that PCV grommet/valve is mounted in?
  15. R

    BBI SSI intake

    Has to be hood clearance, Mine is rubbing pretty good on my stock '89 hood.
  16. R

    How do I add 2nd PCV valve to drv valv cvr?

    I put in an air/oil separator inline, but it will fill up after just a few miles of driving. PCV is sucking up some serious oil. I did a compression check before head and intake install and came out great, so I dont think I have ring blow by. any other suggestions on how to install...
  17. R

    ssi intake

    The ssi has lifted and separated lower runners, so the "lower intake baffle plate" is actaully the the bottom of the intake below the runners, you cant not install it. I did put in an oil separator, it will fill up after a few miles of hard driving.
  18. R

    How do I add 2nd PCV valve to drv valv cvr?

    Installed new heads and intake and I'm getting TONS of oil sucked up thru the PCV system into the upper intake. From what the PCV sticky says I think I need to add another PCV valve to the driver side valve cover to help vent the crank easier. How do you do this? you need another PCV...
  19. R

    ssi intake

    I just installed one,............ get a Trickflow or Edlebrock and save yourself some headaches not worth the extra money, they look great but take a bunch of tweaking Pros: looks cool, built in EGR, can access valve covers with upper intake on. new fuel rail upgrade included Cons...
  20. R

    SN95 style interior conversion

    Cant find much info about what all is involved. found modularfox.com .... some info there, but not enough. can anyone provide some info on what is involved to get HVAC system working and gauges? Figured out the interior door handle issue by planning on using remote door poppers and...
View older results
Top Bottom
Back
Forums
Menu