Search results

  1. kpack5982

    Fuel Injection Screens

    apparently I didn't have the right size, but I found a GREAT method: I bought a screw extractor set a while back and it was a cake walk. Thanks for the replies though guys!
  2. kpack5982

    Fuel Injection Screens

    It came with a service kit I bought from a company on ebay. I was trying to figure out what was wrong and browsing the net I came upon a couple things where they had the same problem I did so I thought, wth? Kit was like 20 bucks shipped and I knew I needed a couple new pintle caps so I went...
  3. kpack5982

    stock cam v/s b-cam?

    I love mine, I hit about 3000rpm and BAM the things wants to move. Here's a couple links to compare the two: http://forums.stangnet.com/showthread.php?t=682669 http://reviews.stangnet.com/showproduct.php?product=53&sort=2&cat=13&page=1
  4. kpack5982

    Fuel Injection Screens

    they are in the end of the injector that connects into the fuel rail
  5. kpack5982

    Fuel Injection Screens

    I have been fighting a lean condition for a while so I thought I'd replace all the seals on the injectors and check the screens, turns out a couple look really bad. I have the replacments, but what kind of technique do you guys or have u used to take the old screens out?
  6. kpack5982

    Longtubes??

    Although I don't have longtubes I have ran bbk shorties with one flange and mac with the individual flanges. No problems with the bbk taking them off and on again and again. They would seal up fine, but the individual flanges on the mac, I constantly have to retighten header bolts and I don't...
  7. kpack5982

    simple question....

    I've had the same problem again and again, but finally fixed the problem with a new header gasket (less than 20 bucks a pair) and a little bit of copper rtv (6-7 bucks). Was kinda skeptical at first, but no problems after 8,000 miles. Took a little time massaging the heads just enough to get...
  8. kpack5982

    Fuel Pressure Gauge

    I got an adjustable fuel pressure gauge, but am not going to hook it up until I get a fuel pressure gauge to hook to the schrader valve. No on in my area carries one apparently, so i journied out of town and found one they SAID was going to work. Well it didnt, the checking thing to hook to the...
  9. kpack5982

    Any one got any pics?

    I am seriously considering replacing my stock ponies on my 93 LX with the 93 cobra replicas in a light grey. I love the look of the cobras but does anyone have any pics of an lx with those rims?
  10. kpack5982

    Blowing Fuses

    That's the thing, the controler comes with a relay on it, and it is all wired via the controller. Everything worked fine when I simply had a relay hooked up and power on whenever the 12v key on was on.
  11. kpack5982

    AFPR Recommendation

    Got a kirban on the way!!! 75 bucks new, not too bad. Now where should I get a gauge to check the fp?
  12. kpack5982

    Blowing Fuses

    I have a fan control I bought from O'reilly's HAYDEN, INC. - Cooling Fan Control Item No: 3647. It didn't have as big as wiring as the 10 gauge I bought, but here is how I wired it: One 10g wire from the solenoid to the control/relay, there is a 30a fuse on the control line there. From there...
  13. kpack5982

    Blowing Fuses

    yes, yes, and yes, except I am going to run a wire from the ground on the from from the back of the car to the block and run a bigger bolt on the grounds in the front. I am also going to connect a surge suppressor diode, but do i just soder it in and cover with heat shrink or how do you do...
  14. kpack5982

    Blowing Fuses

    So I noticed that I am constantly blowing the fuses to my controller/relay. i have a 30amp fuse in there and I bought one of the temp control units from o'reillys. One thing I noticed is that the wiring is a lot smaller on the control unit, but I went ahead and wired to it anyways, relying on...
  15. kpack5982

    Engine Missing

    well thanks for that. I did an cylinder balance test and all turn out fine also. Could a bad ground be a problem? Or any other suggestions? Man I'm sick of troubleshooting.
  16. kpack5982

    AFPR Recommendation

    I am going to get an adjustable fuel pressure regulator, but would like to know what kind and where I should get a gauge for it. I'm sick of lean issue and hoping this will help out. Any suggestions on which brand, etc? along with the pros and cons of each.
  17. kpack5982

    Engine Missing

    all the plugs look fine, just replaced and checked them and they all have sooty grey material on them, so lean. The codes confirm it with the 41 and 91. But even on start up the fuel pump kicks on fine and everything, but it takes a while to crank over and start. Been that way since I bought...
  18. kpack5982

    Engine Missing

    I'm working on figuring out this stupid miss situation I'm having. Sometimes it will run fine, but there is an obvious miss in the passenger side head. It seems the passenger side is afterfiring into the exhaust making a loud pop sound. When I run the codes I get system lean, so it must be...
  19. kpack5982

    Electrical Chao

    specifically the air bag light came on after I installed the 3g alternator and the radio thing happened after the fan install. I may try a surge surpressing diode, where could I get one? As far as the fan wiring goes, the fan is wired up as follows, the ground from the fan to the battery...
  20. kpack5982

    Electrical Chao

    After my 3g alternator and mark viii fan install I'm having two annoying problems. First my air bag light now blinks to the code of 12 which means insufficient battery power, but it is all ran with a 4g ground wire and all the other wiring is taken care of and two, my radio fuse blows every...
View older results
Top Bottom
Back
Forums
Menu