Search results

  1. 1

    17x10 late model rims in 65

    i have been doing some work on my stang and have come to a crossroad. i dont know what size offset rim to order... the car has had new rear rails put in inline with the front frame rails and then thru the floor subframes. so now i have basically a clean slate as far as having enough room for the...
  2. 1

    Question about rim/rearend width

    thanks, i think i am just gonna order a custom width fab9 to ensure proper wheel fitment. I am still having trouble figuring out this backspacing concept any more help would be appreciated
  3. 1

    stock 65 wheel specs

    sorry for making a new thread
  4. 1

    Question about rim/rearend width

    ok heres what the inside of my car looks like... a little different then i think you were expecting
  5. 1

    stock 65 wheel specs

    what is the back spacing on the stock steel styled wheels form 1965
  6. 1

    Question about rim/rearend width

    Question about rim/rearend width (PICS) I have a 65 mustang with a stock 8 inch rearend, i believe it is 57 and 1/4 inches wide... Now i have a set of rims that are 17x10 with a +20mm offset. I have already removed the inner wheel well so i will have no interference there. my question is will...
  7. 1

    65-66 CUSTOM MADE FRONT COILOVER SETUP IN PROGRESS

    thanks for the diagrams
  8. 1

    65-66 CUSTOM MADE FRONT COILOVER SETUP IN PROGRESS

    do you have templates for the upper and lower reinforment rings???
  9. 1

    02 gt pbr calipers rather than cobras calipers on a 65

    i think im just gonna go cobra... hopefully they'll work better than my old ssbc 4 pistons
  10. 1

    02 gt pbr calipers rather than cobras calipers on a 65

    the reason i asked is because i have a set on 11" PBR calipers layin around... i guess i'll not be cheap and go with the cobra's, i didnt realize there is that much difference in the braking power- thanks Nick
  11. 1

    02 gt pbr calipers rather than cobras calipers on a 65

    will the mustang steve brake conv. kit work for these calipers or just the cobra ones?
  12. 1

    foxbody 8.8 in a 65 coupe

    i have no inner wheel tubs... the cutting has already been done
  13. 1

    foxbody 8.8 in a 65 coupe

    so if i have the inner tubs out and use an 05+ offset could i run an 18x10 without norrowing the rearend? does anyone know the track width of the 8.8 from axle flange to axle flange
  14. 1

    foxbody 8.8 in a 65 coupe

    i have a 8.8 that came from a foxbody... i have been thinking about putting it into my 65. my question is will it fit without narrowing it. i have searched but couldnt find the track width of the 8.8. i know the stock rearend is i believe 57 1/4 for the 65. i am not worried about the mounting...
  15. 1

    how much tower can i trim

    i am running the stock type suspension setup with a 1 inch shelby dropon 620s. i need to make some extra header clearance and was wondering if theres a template that i could use to see how much i could get away with trimming. thanks in advance
  16. 1

    what type of distributor for blow thru turbo setup

    i have an MSD unit with vacuum advance... will this work with a blow-thru setup or would a standard distributor work better
View older results
Top Bottom
Back
Forums
Menu