Search results

  1. reeber

    LizardSkin SC vs. Fat Mat

    What made you decide on a liquid deadener? I dynamatted my entire trunk and doors and there is an amazing difference. I used the extreme.. It also is a heat deflector / shield. So, once I do the floor and roof, it'll hold in the heat / cold much better than stock.
  2. reeber

    Polishing issues!!!!

    Well, I just got my Pinnacle advanced swirl remover and polish. MUCH BETTER! It wipes right off after I work it into the paint. And the results are amazing! I am still learning the limits of the DA buffer. So, I am sure I'll get even better at it in time. Pinnacle rocks!
  3. reeber

    Polishing issues!!!!

    I do not have any issues getting wax off.. .that's easy... I am having problems removing polish.. I let that dry for maybe 2 minutes to a haze, then try and wipe off.. I just got the Pinnacle brand swirl remover and advanced polish and it worked MUCH better... I just think my polish was no good..
  4. reeber

    Polishing issues!!!!

    OK.. .I bought the Porter Cable 7424... I used it for the first time yesterday on my hood that was painted about 9 months ago. I applied McGuire's Paint Cleaner as step 1.. It was a PAIN IN THE A$# to buff out by hand and by machine. Then I went to Step 2, "Polish"... I applied that with the...
  5. reeber

    just finished dynamatting and...

    Well I copleted the entire trunk and both doors with dynamat extreme. It took me a little less than one whole bulk pack. So, I put the driver's door back together, take a 15 minute drive, and everything is great. I parked and took apart the passenger door, installed the dynamat and put back...
  6. reeber

    96-98 gauge cluster ?

    go to www.florida50.com they have custom aftermarket guages you can buy. They are like $600 though...
  7. reeber

    Will a 99-04 Cobra front bumper cover bolt to 96?

    Not even close...
  8. reeber

    What is "too cold" to polish and wax???

    Is there an ideal temperature range to wash, polish, and wax a car? Can I do it in 40 degree weather? Do the chemicals seperate, thicken too much, etc...
  9. reeber

    Springs coming fast... South Jersey / Philadelphia meets?

    Well, spring is right around the corner... let's setup some car meets... Or, does anyone know of any plans for our area?
  10. reeber

    erratic idle issue on 98gt

    I had the exact same problem... It's in your MAF slopes on the tune. Do you have aftermarket injectors? Aftermarket MAF? If so, is the MAF calibrated to your injectors? If so, you have to data log your car at idle and give it gas and watch the laptop record the readings as the idle...
  11. reeber

    Just bought the Porter Cable 7424

    Well, I got it in the mail yesterday... Now, I need the temperatures to go up above freezing!! I am anxious to give this thing a shot.. .Thanks guys for all your input!! You all really helped a lot!!!! I'll take before and after pics of the paint and post...
  12. reeber

    Eibach springs?!?!?!

    happy with my pro-kit as well... very happy...
  13. reeber

    What causes lean and rich out of the same bank

    I have the same issue... I am replacing the O2's this week... I think it is the sensors..
  14. reeber

    Which clutch with 400rwhp?

    I had the centerforce dual friction and it held until I hit the 430 HP / 400 FT. torque level... Then, I burned it up very easily... I now have the Spec Stage 3 and absolutely love it!!!!!! It holds every bit of my 500 RWHP... It takes a while to break in, but be patient and break it in...
  15. reeber

    Just bought the Porter Cable 7424

    How is it compared to the $30 ones you find in Pep Boys??? I had a problem applying paint cleaner and swirl remover with the cheap orbital. The bonnet kept popping off and the motor couldn't keep up... It would drown out... I am expecting mine to show up today on my door step...
  16. reeber

    LT's, which ones? Why?

    I have the ceramic coated MAC long tubes... I love them... And I can drop the tranny without removing them!!!! Clutch swap is a breeze...
  17. reeber

    Whos got a stroker/motor swap?

    I have the VT Engines forged short block, not a stroker though... If you plan to add a power adder, the stroker really isn't necessary... Believe it or not, the stroke on the stock 4.6 is very nice..
  18. reeber

    Just bought the Porter Cable 7424

    Who has this DA polisher? What do you think of it? I just bought it and a bunch of pads... I plan to attempt to get my paint back to where it should be with it.. Hopefully, it'll do the job..
  19. reeber

    Help with new Porter-Cable 7424 Pads!!!!

    Blue - Finishing Pad.. Use to apply wax and for buffing... White -- Polishing Pad... Use this to apply polish Gray -- Finishing Pad... Use to apply / remove wax..
  20. reeber

    Methanol Injection?

    methanol injection is only used for cars that have higher than normal intake air temperatures. The only benefit to having methanol injection is to cool the air entering the intake. This is done by atomizing the methanol mixture with the air mixture, creating a cooler air charge, giving you the...
Top Bottom
Back
Forums
Menu