Search results

  1. KyleEBK

    Car Idle,needs Raising

    ill pick up some c clamps, smaller ones are the larger ones?
  2. KyleEBK

    Car Idle,needs Raising

    Fuel is not an issue. Alternator output is. There is a mechman 320 amp hairpin alternator installed on the vehicle and to get better output at idle I would like to raise the idle I was thinking about clipping soemthing onto the throttle stop screw that can be taken off or put on when needed (...
  3. KyleEBK

    Car Idle,needs Raising

    How can i raise the idle of my vehicle it is idling at a paltry 650 or so,i would like tog et it to idle at around 900-1k rpms. what are my options? car has a 92 302 motor in it, mostly stock,i have tried moving tps but it seems to jus go right back to normal after shutting it off and turning...
  4. KyleEBK

    Car Running Hotter Then Usual After 320 Amp Alternator Install

    this issue was thermostat related, change thermo and all good i am running 0000 gauge grounds and positives atm
  5. KyleEBK

    Car Running Hotter Then Usual After 320 Amp Alternator Install

    not sure what actual temp is, running stock gauges, i jsut idled the car for 30 mins and drove it around for 20 and it stayed cool like normal but as soon as i strarted running the stereo loud it started heating up again. wonder if the alternator is just creating so much heat and the radiator...
  6. KyleEBK

    Car Running Hotter Then Usual After 320 Amp Alternator Install

    wanted to add the pulley on the new alternator is 1.8 inches compared to i think 2.5 pulley on the stock ford 3g 130amp unit. not sure if that would make any dif in the cooling system, doubtful
  7. KyleEBK

    Car Running Hotter Then Usual After 320 Amp Alternator Install

    I just added a 320 amp alternator to my car last weekend. 84 svo mustang with a 92 ford 5.0 engine It is a 1 wire alternator so it self excites and doesnt need to be plugged in like the previous alternator (was a ford 130 amp 3g alternator it seems to be running hotter then it use too, it use...
  8. KyleEBK

    1984 Svo Mustang 3rd Brake Light Not Working No Power At Sockets

    3rd brake light not working on my 84 mustang spoiler,checked at the socket with dmm and no power there, how should i trouble shoot this and where does the wires run for the 3rd brake light? it does not have the original svo spoiler on it the other 2 brake lights work fine, im pretty sure the...
  9. KyleEBK

    Speaker Size In Doors?

    yea there may be some relief with high end neo speakers if i find anything decent i will post it here or a small speaker ring could be added to raise the depth u could go , maybe a 1/4 in or so would fit without making the panel come out to far
  10. KyleEBK

    Speaker Size In Doors?

    come on some one has to know the depth of how deep you can go? i know its a 6.5"
  11. KyleEBK

    New Alternator Install

    yea gonna be running some 4/0 back to the battery, biggest wire i could find. have all the fuses and fuse blocks ordered. already have a 0 gauge in there for all the grounds and positives to solenoid n such. running positive from alternator output with 4/0 and negative from mounting bracket...
  12. KyleEBK

    New Alternator Install

    This new custom made 6 phase alternator I have is self exciting. the alternator in the car is a 3g, I shouldnt need the plug for the 3g at all then right? I can just run the cable from output bolt of alternator to the solenoid and another cable to my battery right? the new alternator only has...
  13. KyleEBK

    Car Has No Battery In Front.i Want To Get 1 In There. Help

    i know i could prolly order a tray from 50resto and modify it to take a alrger battery but whether it will take the added weight i dunno.
  14. KyleEBK

    Car Has No Battery In Front.i Want To Get 1 In There. Help

    problem is not old tray even, there is no hardware at all,most likely be running a d3100 xs power in the hatch and something else up in front (starting battery, prolly nothing special since batteries only last so long anyways...)
  15. KyleEBK

    Schematic and routing for Short Belts

    right i find that if certian people are working they know alot of things but other employees dunno :poo: if its not on computer
  16. KyleEBK

    Speaker Size In Doors?

    I have an 84 svo mustang, an accident a year and a half ago took out 1 of the doors and it was replaced with a 93 door, im looking to put something in the doors for midbass with a high powered tweeter in the dash, i know i will prolly have to cut the 84 door to get 1 in but the 93 door should...
  17. KyleEBK

    Schematic and routing for Short Belts

    ill check current belt, hopefully still has numbers on it somewhere, paper i got with high output alt says use a belt half inch smaller then current belt,which is think would be 72.5 inches
  18. KyleEBK

    Schematic and routing for Short Belts

    forgot to mention it has a 3g alt in it now
  19. KyleEBK

    Schematic and routing for Short Belts

    think theres some pictures missing from this thread now, I have a 92 5.0 engine with the smog deleted and the ford racing ac delete bracket that relocates the PS pump to old AC position. think I was using a 73 inch belt, I have a new alternator with a 1.8 inch pulley on it now,should i use a...
  20. KyleEBK

    Car Has No Battery In Front.i Want To Get 1 In There. Help

    i know i can get a replacement tray and hardware from a few sites. but can i put a tray from a different vehicle in that would hold a group 31? I know what size a regular mustang battery is and what battery goes into it. theres a huge difference in battery amp/hour and reserve capacity between...
Top Bottom
Back
Forums
Menu