Search results

  1. D

    Clutch Quadrant

    I don't get how it is suppose to feel like stock? I've read a lot of people saying that but without the return spring in there it feels really sloppy and loose like there is littlerally no pushback at all. It's adjusted to where it's suppose to be at but it still doesn't feel like it should.
  2. D

    Clutch Quadrant

    When I replaced my clutch I installed a FRPP cable adjuster which came with the new cable and the metal quadrant. The one thing I don't seem to understand is when you install it. The return spring which brings the pedal all the way back up to the top has nothing to attach to on the metal...
  3. D

    Borla Exhaust

    Do you think the that borla cat-back, that's not the stinger right? would sound fine with the bassani o/r X pipe? Like no major drone?
  4. D

    Borla Exhaust

    what type of prochamber do you have for your setup if there is more then one?
  5. D

    Borla Exhaust

    it helps out a little bit to see what might work and what might not. On the borla website for my car. It's Part # 14624. http://www.borla.com/applications/lookup.aspx/1997/Ford/Mustang/GTStainless_Steel_Cat-Back_System/14624/ It says a straight though multi core? Would that be a chambered...
  6. D

    Borla Exhaust

    I have a 97 mustang GT and the seams on the factory mufflers are starting to come apart slowly but surely. I was looking at the borla catback for my car along with a matching off-road pipe. I believe the boral is a straight through muffler design. I've read that an o/r x-pipe works/sounds...
  7. D

    3.73 Gears videos in daily driving

    If he's cruising at 65mph at 2100 rpm's that's with the tremec 3650 correct? Don't the 96-99's have the t-45's which have a different gear ratio that would cause a different rpm at the same speed?
  8. D

    Clutch Info help

    Bump for help by chance? :shrug:
  9. D

    Clutch Info help

    I have a 97Gt 5 speed. I took my flywheel in and had it machined, the guy didn't know how much he took off exactly but said he took off a lot. I installed a King Cobra clutch set with the flywheel, had major clutch chatter and have about two 50 cent sized hot spots where you can stick a .006...
  10. D

    car pulls to the right and other stupid problems help please

    If it's a gradual pull it's most likely an alignment issue. If it's pulling hard it could be way out of align or you have a radial pull in the tire. I've seen guys bring in cars with directional tires on backwards and drive for 10k+ before and not notice or do it on purpose. If you have offset...
  11. D

    Engine knock

    Does it do it just sitting there at idle? WOT? normal driving? Where at does the tick sound like it's coming from?
  12. D

    Codes Pulled...need Help Fast!!!

    Sensor 2 bank 1 would be the back sensor on the drivers side. But if you have an o/r midpipe and no back sensor then maybe the mil eliminators aren't working anymore?
  13. D

    Got a wierd popping noise not sure what it is

    Sounds like a busted tranny mount to me. I had a popping/knocking noise from underneath mine when I'd take off, occasionally when hitting a bump, but it didn't do it shifting gears.
  14. D

    Caster & Camber Help

    There might be a chance that the stuff on that side wasn't installed properly. I had a guy bring his 94 mustang into work with the bullitt suspension installed. We couldn't get it to go any farter out with camber or caster on either side. One of the tech's took the top apart... moved i think the...
  15. D

    Clutch chatter

    Well, I need to prove they messed up. Their is ten thousands, 0.010, runout on the outter edges while there is six thousands, 0.006 runout near the inside. The outside half of the clutch disc is all that was making contact with the flywheel while the inside half of the flywheel and pressure...
  16. D

    Clutch chatter

    I beg to differ the chatter doesn't do anything to the clutch. I had my flywheel resurfaced... supposidly they did it.. Well only after 63 miles of driving, with the King Cobra setup, and the flywheel and pressure plate have hard spots from being heated up really bad. One place was able to get a...
  17. D

    cant decide on wich springs. steeda or eibach

    The bullett suspension drops the 96-98 cars 1" and the 99+ cars .75" if I remember correctly. To me dropping the car even more with 18's with smaller rubber is going increase the feel of the road pretty good.
  18. D

    Clutch chatter

    I have a 97 mustang GT with the same problem. I'm going to go get the flywheel rechecked cause the place that did it took off a lot, left it sitting in the water too long and didn't bother to say anything. Only having 63 miles on it. I now have hard spots on both the clutch and flywheel with...
  19. D

    Help! New Exhaust, Engine Bogging Down!

    I know this is my 1st post, I have a 97 mustang gt 5 speed. I remember reading in a mustang magazine that when installing LT headers you need to get a tune cause the o2 sensors are moved farther back in the exhaust and they only gained 9hp.... but then with a hand held tuner, I think Diablo...
Top Bottom
Back
Forums
Menu