Search results

  1. C

    correct transmission fluid

    what is the correct transmission fluid to run in a 1987 ford mustang with a manual transmisson?
  2. C

    changing the quadrant

    has anyone had problems with noise coming from the quadrant when the car is in high rpms. when I am in first and second at about 3,000 I will hear a lot of noise coming from the quadrant in the car. the quadrant kit that I bought from ford did not come with the spacers. is that the cause of the...
  3. C

    help with timing on 5.0

    14 is going to be too high on a bone stock mustang. I have tf track heat intake, 70 mm bbk tb, mac 2.5 exhaust, xpipe, all msd ignition and I have mine set at 13 degrees. try to stay around 11 or 12 on a stock car until you make some power upgrades
  4. C

    how bad are bumps on your car?

    I was going down a street and someone wanted to race me and I was racing him and there was a bump that I went over in the race. it was not a pothole just a big bump. how bad are they for your car and what can be messed up on your car if you hit a big one. nothing on my car hit the ground. my...
  5. C

    pilot bearing installation

    I just changed my clutch and I need to change my pilot bearing. does anyone have any instructions for the pilot bearing? do you have to pull the tranny to get to it?
  6. C

    headlight problem

    my headlight fell out one time but I caught it in time to where I could cut the bad part off of it with a knife and I refit the headlight. mine were 210 dollars so I made it work. I have the ultraclear headlights. I would get those if you burned your old ones too far
  7. C

    Please guys..begging for help...weird noise

    I just had the same problems you are having on your car in my car. If you changed your clutch and did not resurface the flywheel, change the throwout bearing, or change the pilot bearing you are going to have noise. I put a centerforce dual friction clutch on my car and I did not change the...
  8. C

    Please guys..begging for help...weird noise

    I know you have been helping him with the problem with the pilot bearing. I have to change my pilot bearing and it did not come with installation. do you have to pull the transmission and bellhousing to get to it to change it or can you change the pilot bearing without removing the tranny?
  9. C

    bad clearance on exhaust and quadrant

    I have taken my exahaust off when I chagned my clutch but when I put it back on, I had bad clearance on my pipes because my pipes are barely touching the frame so it will rub against the frame when I am driving. Has someone had problems with the pipes rubbing and what can I do to fix it? I also...
  10. C

    changing the quadrant

    I got the cable and quadrant on. thanks for the help guys! now I just have to check if it is narmal for the clutch fork to shake when the car is ideling. I can look in past my 8th spark plug and see the clutch fork moving and because it is shaking, it is making a loud noise. the noise goes away...
  11. C

    changing the quadrant

    I have the quadrant off. the problem I have is the clutch fork moving. people have told me that the clutch fork should never move. since the clutch fork is moving, it is moving north and south. it will shift forward toward the front of the car and with one finger I can move it back to the back...
  12. C

    changing the quadrant

    I have the fms adjustable cable on and quadrant on and now I am having problems with 3 things on it. The kit I bought from ford did not come with 2 spacers so it was hitting the shaft so I cut a piece from my old quadrant and made one spacer with it and it did not rub anymore. Now the cable will...
  13. C

    changing the quadrant

    I have a centerforce duel friction clutch on my 1987 ford mustang and I put a ford racing adjustable clutch cable on today. I bought it with the quadrant but I dont know how to change the quadrant. I know it is by the pedal in the car but does anyone have any instructions on how to change the...
  14. C

    boring my 302

    thanks for the help. I will let you know how it turns out when I am done with it
  15. C

    boring my 302

    boring to a 347 alright so I can't go to a 383. If I want to go to a 347 on my 302, do you know of any engine shops down south that can bore my 302 to a 347 and port my TFS intake and heads?
  16. C

    boring my 302

    with tax money coming in a few months I am thinking about building a new block for my '87 mustang lx with 125 shot nitrous. I wanted to go with a 383 bore with a 3.750 engine stroke and 6.250 rod length. What are some good places to order a complete engine kit with everything, the crankshft...
  17. C

    the best is not working

    it was not grabbing the car felt like I was driving with my emergency brake up because the clutch was not grabbing when I was driving. the clutch should bite when you let go of the clutch and it was not grabbing. I put a centerforce dual friction clutch in it last week and now it grabs
  18. C

    help with trick flow intake instructions

    I am putting in my trick flow upper and lower intake on my 1987 ford mustang tomorrow. does anyone have a thread on how to install the intake or can someone send me some instructions? I know how to put in the upper intake but I need help with the lower intake. thanks
  19. C

    the best is not working

    it was a blown clutch
  20. C

    the best is not working

    my car has not been working the last 2 days. I have a '87 lx 5.0. my car has been not wanting to go when I drive. It feels like if you were riding with your emergency brake on or if there was a chain and a truck pulling it the other way. I hope someone has had this problem before because this is...
Top Bottom
Back
Forums
Menu