Search results

  1. 1

    project 91GT

    I thought of spraying my underside with a tintable bed liner that way i still get the body color , sound deadning and rust protection. Dont now how easy it would be spraying upside down. I think the lizard skin would be better then the dynamat cause it will go in the in all the tight spaces you...
  2. 1

    project 91GT

    Always wanted you try that stuff let me know how it spray's.
  3. 1

    battery drain problem

    I will change the guage to a key switch hot. On the radio it droped from 1.38 to around 1.28 amps. So what do I do about this one?
  4. 1

    battery drain problem

    After I hooked up the new switch and found now change I hooked up meter , shut door, and started pulling fuses . Narrowed it down to #8 which I went farther and found out it is the acc. power wire for the radio, but according to my diagrahm goes to the #11. that makes no sense. Next I found the...
  5. 1

    battery drain problem

    I did disconnect the switch at the ignition and there was no change, I'm replacing it though 20 yrs old , not taking a chance. The only wire hooked up to the alt is the charge wire ( 3G setup) but I didnt un hook it.thefactory ones are just tied up to the side. The car didnt run when I...
  6. 1

    battery drain problem

    Ok checked the wires pulled no.1 fuse nothing, pulled no.4 fuse nothing, unhooked relay at fuel pump nothing, onhooked rear defroster nothing . Are these the right wires ,these are the ones I determined from the schematic. After unhooking each wire I hooked it back up and moved to the next one...
  7. 1

    battery drain problem

    Ok checked it out with multmeter I have 1.32 amps , pulled all fuses one at a time nothing changed. the only change I can get is if I unhook yellow wire at soliniod , then it will drop to 1.20 amps thos are only changes Ican get.
  8. 1

    battery drain problem

    Let me answer a few things my glove box light is unhooked as the dome lights, no alarm . I will try your method with the ohm meter and pull fuses. I have enough of a drain that I can unhook the negative and just touch the the battery and get an arc. I'll let you know tomorrow. Thanks
  9. 1

    battery drain problem

    I did some test and came up with this . I unhooked the negative battery terminal and hook a test light to the battery and touched the core support , it lights up so this tells me I have a drain. I start pulling wires off the hot side of the starter relay , the lght goes out when I pull the...
  10. 1

    fr500 wheels will they fit?

    will go the junk yrd route thanks
  11. 1

    fr500 wheels will they fit?

    so does that mean the LRS kit wont work?
  12. 1

    fr500 wheels will they fit?

    Is that 5 lug coversion kit from Latemodelrestoration.com worth the money or am I geting junk , it look's pretty good for $400 .
  13. 1

    fr500 wheels will they fit?

    Awesome , just put on coil overs and having tire clearence problems with stock ponys on 245's. Just wanted to know before I get them, probaly going to go thru LRS. Thanks for the help keep sending the pics
  14. 1

    fr500 wheels will they fit?

    Do you know who makes the rims on that coupe and what suspesion set up he is running. That car is sweeeet with that set up.
  15. 1

    fr500 wheels will they fit?

    want to put OE fr500 wheels on my car 17 or 18 and 9" or 10" wide . I want to know if the will fitin thr front with UPR coil overs and will the 10" fit in the rear. will I have to modify anything in the rear to make them fit and whats the widest tires I can fit. Thanks
  16. 1

    coilovers on a fox

    I just put UPR's on my 88 and I have 245/45/16 on pony wheels the have about 1/4 inch between them . how do I fix that
  17. 1

    Fall Pictures With Plans for the Winter...Going Turbo????

    how did you get everything to fit in frt with no rubbing. I just did the UPR coilovers and I have like a 1/4 inch from the tire and I'm running 245/45/216 on ponys. How much space do you have.
  18. 1

    upr coilover help ?

    Thanks will do. Also when I put in the MM CC plates will I have to buy any thing else to use those.
  19. 1

    upr coilover help ?

    Just got a set of coilover w/ springs and new shocks. My question is according to the directions that UPR gave me you assy. with all there parts and install 7/8 spacer included with CC plates. I am using stock CC plates for now and when you use the bushing you have no thread for the nut and it...
Top Bottom
Back
Forums
Menu